Tender For Special Repairs/ Replacement Of Ber Pump Sets, Chloronome Gas Plant And Allied Works At Rts And Depot Hempur Under Ge (East) Bareilly
Tender Value
56.94 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
20 days left
EMD
1.10 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs/ Replacement Of Ber Pump Sets, Chloronome Gas Plant And Allied Works At Rts And Depot Hempur Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIRS/ REPLACEMENT OF BER PUMP SETS, CHLORONOME GAS PLANT AND ALLIED WORKS AT RTS AND DEPOT HEMPUR UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /94 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for Lifting/ taking out defective submersible pump of any capacity alongwith column Pipe of any size and submersible cable, dismantling the pump from motor, setting aside for repair (servicing / overhauling including lowering the pump set into borewell replacement of packing and nut bolts (if required) and testing after the completion of works in the presence of JE/ Engr in charge. |
| 3 | S&F submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well (Casing pipe size 80 to 150 mm) supply and Install complete suitable for above 15 HP inclusive of 40 metre long submersible cable and starter complete all as specified and as directed. |
| 4 | Supply ,lnstalling, testing , perfect aligning and proper levelling and commissioning of Pumping sets, centrifugal, electric driven, complete suitable for 25 HP inclusive of starter and PCC foundation complete all as specified and as directed. |
| 5 | Supply ,lnstalling, testing , perfect aligning and proper levelling and commissioning of Monoblock pump set suitable for 415 V ,3 phase system having capacity 5 HP complete all as specified and directed. |
| 6 | Supply and laying of centrifugally cast (Spun) ductile iron pressure 100 mm bore dia pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/ tyton joint and including dismantling and taking down unserviceable / cracked DI pipe with all fittings complete all as specified and directed. |
| 7 | Supply and laying of centrifugally cast (Spun) ductile iron pressure 150 mm bore dia pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/ tyton joint and including dismantling and taking down unserviceable / cracked DI pipe with all fittings complete all as specified and directed. |
| 8 | Supply and fixing DI fittings for Flanged pipe, DI Bends, connecting pieces, bell mouth pieces, tapers, tee pieces of one end flanged and other end spigot or socket upto 150 mm bore complete all as specified and directed. |
| 9 | S&F Rubber gasket joint Spigot and socketed for 100 mm dia pipes and fittings for the following bore complete all as specified. |
| 10 | S&F Rubber gasket joint Spigot and socketed for 150 mm dia pipes and fittings for the following bore complete all as specified. |
| 11 | S&F in repair 100 mm bore dia sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR ,Kartar or Equivalent as approved by GE. |
| 12 | S&F in repair 150 mm bore dia sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR ,Kartar or Equivalent as approved by GE. |
| 13 | S&F in repair 80 mm bore dia sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. complete including taking out old existing unservicable sluice valve including making arrangement for safe working all as specified and directed. Make: BIR, KIRLOSKAR ,Kartar or Equivalent as approved by GE. |
| 14 | S&F 100 mm bore dia Cl Non Return Sluice Valve flanged ends of class 1.6 PN, including taking down old existing unserviceable Non Return Valve complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar or Equivalent as approved by GE. |
| 15 | S&F 80 mm bore dia Cl Non Return Sluice Valve flanged ends of class 1.6 PN, including taking down old existing unserviceable Non Return Valve complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar or Equivalent as approved by GE. |
| 16 | Supply and fix MS flanged pipe 100mm NB heavy duty for multi storied building duly painted With 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed at site. |
| 17 | Supply fixing testing and commissioning submersible cable flat 10 sqmm x 3 core PVC insulated and PVC sheathed with multi stranded copper conductor 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer forevery column pipe of 3 mtr length all as specified and directed. |
| 18 | All as per Item No 16 but area 6.0 sqmm x 3 core. |
| 19 | All as per Item No 16 but area 4.0 sqmm x 3 core. |
| 20 | All as per Item No 16 but area 2.5 sqmm x 3 core. |
| 21 | M&L PCC 1:2:4, type B 1 (using 20 mm graded granite stone aggregate) as in coping for steel pole including necessary formwork complete all as specified. |
| 22 | M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for road/Hard standing cutting complete all as specified and as directed. |
| 23 | Supply , installation and testing of Chemical dosing system for Alum/ChIorine solution consisting of metering type dosing pump of capacity 27 LPH against 2.5 Kg/cm2 pressure with chemical preparation cum dosing tank of capacity 100 Liters- one no. made out of FRP and agitator made of SS-316 and having suitable arrangement for mounting Dosing pump and agitator on the tank lid. Make of dosing system. complete all as specified and directed. |
| 24 | Supplying, installing, testing & commissioning, factory assembled Diesel Engine driven generating set Silent as per CPCB - IV+ Norms, coupled with AC alternator to give continuous output of 125 KVA at a PF of 0.8 lagging, 415 volts, AC, 3 phase, 4 wire, 50 HZ, 1500 RPM, directly coupled with diesel engine Liquide cooled mounted on common base frame complete with inbui fuel tank of adequate capacity with fuel line & accessories, PCC foundation work as pe manufacturer's instructions,vibration damper pads, control panel showing all parameters of engine,alternator , sound proof canopy & other accessories etc. and suitable for autometic operating on mains failure complete comforming to the undermentioned technical specification complete in all respect and all as specified and directed. |
| 25 | (A) DIESEL ENGINE : 4/6 Cylinder Air cooled to deliver 154-162 BHP at 1500 RPM under NTP conditions and conformimg to ISO 9001/2015 with an overload capacity of 10 % for one hour during 12 hrs continuous operation with the following accessories all as per Kirloskar Engine Model No-4R1080ETA 4G1 Water cooled (or) equivalant of model in Ashok leyland-H6G4DE125 with Electronic Governor/ Cummins-QSB4.5-G2 Water cooled.(a) Blower fan or heat exchanger with guard(b) Pipe coupling for engine cooling system piping(c) Corrosion inhibitor coolant(d) Paper element filters for(i) Fuel(ii) Lube oil (iii) B pass |
| 26 | (f) Engine bearing mechanism in fly wheel housing (g) Shut off coil with safeties for LLOP/HWT/over speed(h) Dry type air cleaners and vaccum indicators(j) Residential silencers(k) Stainless Steel exhaust flexible bellows(I) Motor driven priming pump(m) Battery charging alternator(n) Exhaust piping made out of STIC C class , MS pipe inclusive of all accessories and hardware, necessary support scaffolding as per manufacturer's recommondations to sustain back pressure with rain cap.(o) Mineral wool insulation 2 inch thick suitable for 400 degree celcius temperature cladded with aluminium sheet of 30 gauge for the entire length of exhaust pipe(p) First fill of oil, coolant and diesel during commissioning and 12 hours testing(q) Interconnecting copper cabling of adequate capacity between batteries and controller (r) Fuel pipes as per manufacturing standerd (s) Self starter 12 volt D.C.(t) Mechanical governor(u) Fuel injection pump(v) Electronic instrument panel, complete with all accessories as per manufacturer's specifications displaying the following:-(i) Battery voltage and charging rate(ii) Water temperature(iii) Lubricating oil pressure(iv) Engine speed(v) Engine hours(vi) Frequency(vii) Voltage(viii) Fuel Balance |
| 27 | (w) Safety control ( Trip and indication )(i) High water temperature(ii) Low lube oil pressure(iii) Overspeed stop(x) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) fabricated from ISMC 100 channel for mounting engine and alternator as per manufacturers design alongwith AVM pads(y) Battery:- 2 Nos, 12 Volt, maintenance free battery with leads and terminals [ Make of battery : Exide/Amron or equivalent to list of makes](z) Fuel Tank : Inbuilt Fuel tank, with level indicator fuel inlet ,fuel out let, air vent, drain plug, in let arrangement for diesel filling from exterior of canopy (without opening its panel) etc complete all as specified and directed. |
| 28 | (B) ALTERNATOR: 125 KVA at 0.8 PF ,415 volt, 3 Phase, 4 wire, 50 Hz , 1500 RPM , Self excited and self regulated +-1% with AVR brushless excitation, screen protected, drip proof, Insulation class H, IP-23, self ventilated and conforming to BS : 5000 / IS: 4722 suitable for engine as mentioned here-in-before(C) ACOUSTIC ENCLOSURE: Factory Made acoustic enclosure as per OEM's recommendation |
| 29 | CONTROL PANEL: The control panel shall be manufactured by 2.0 mm thick CRCA sheet duly 7 tank process powder coated dust and vermin proof, weather proof and comprising the following:-(i) Standerd Engine instrumentation(ii) Multifunction meter which able to measures (a) Individual phase current (Amps) (b) Phase Voltage (V) (c) Generator out put fequency (Hz) (d) Engine Water temperature (Deg. C) (e) Lube oil pressure (Kg/cm2) and equipped with hour counter(iii) MCCB 4 pole, 415 Volts, 200 Amps rating, rupturing capacity 25 KA thermal magnetic release,adjustable over load (0.7 to 1), Standard control panel with micro processor controller with engine satelites and protection, sound proof canopy with residencial silencer, fix with overload & short circuit, (iv) Key switch |
| 30 | (E) CIVIL WORKS:(i) All civil for works installation related of to DG suitable Set panel size of and platform equipment made are by deemed PCC to 1:2:4 be included as per OEMin to be included into quoted rates.Note:- The fuel for final testing of 12 hours as well as all test required shall be supplied by the contractor and cost deemed to be included in the above quoted rate. All other necessary equipments like resistance load strip heater of suitable capacity/rating or arrangement of water load test and any other items required for final testing shall be provided by the contractor without any extra cost to Department. The testing of DG set shall be carried out by the rep of Accepting Officer. |
| 31 | (F) AMF Panel : Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for 125 KVA for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication / Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following: 1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip. 2. Auto/Manual/Test/Off selector switch3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay).4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering5. Energy analyser unit to indicate current, Voltage( L_N & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.6. LED Indicating lamps for load on mains and load on set7. Fuse/ MCB for instruments8. Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. 9. Main supply failure monitor10. Supply failure timer11. Restoration timer12. Control unit with three impulse automatic engine start/stop and failure to start lockout.13. Impulse counter with locking and reset facility.14. ON/OFF/Control circuit switch with indicator. |
| 32 | 15. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start/auto stop depending upon load status and equirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring.Notes :-(i) The AMF Panel shall be fabricated by CPRI approved factory from the attached list of make. The necessary certification shall be furnished by the contractor. The constructional drawings, make of switch gear and hardware, size of panel board, technical specification shall be submitted by the contractor for approval of accepting Officer.(ii) Contractor shall arrange inspection for DG set/ AMF panel at factory premises before despatch. The inspection shall be carried out by the nominated rep of accepting officer.(iii) Any civil work involved in installation of panel board deemed to be included in item rate. |
| 33 | Taking down old service connection/lJG Cable removing of site complete all as directed. |
| 34 | Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 95 sqmm x 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed. |
| 35 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed by Engineer-in-Charge. Note: Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables |
| 36 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil. |
| 37 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the startin pointcomplete all as specified. |
| 38 | Material and labour for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note: Only compacted thickness of sand will be measured and paid separately. |
| 39 | S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade not less than 0.45 mtr wide for repairing road cut/footpath carried out under respective items. |
| 40 | Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm. |
| 41 | M&L for GI pipe, light grade 80mm dia for road crossing of cable for cable protection laid in trenches or above ground surface, complete all as specified and directed. |
| 42 | Demolition for cement concrete/road in ground floor and paving n. exc 15 cm thickness below or above ground level including removal of rubbish to a distance exc 1.50 Km and n.exc 5.00 Km etc complete all as specified and directed. |
| 43 | M&L PCC 1:2:4, type BI (using 20 mm graded granite stone aggregate) as in coping for steel pole including necessary formwork complete all as specified. |
| 44 | M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) for road/Hard standing cutting complete all as specified and as directed. |
| 45 | M&L for earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore lig grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC type BI cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade Gl pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testingon completion and as directed. Notes:- (i) The cost of Gl in earth r/o above continuity item. conductor with Gl pipe 15 mm light grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement, the cost for the same is deemed to be included in above item. |
| 46 | M&L in replacement Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of but 25x4mm galvanised iron strip all as specified. |
| 47 | SITC LT panel,(Water supply PH No.1) indoor type cubical panel board, made out of 2mm thick CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather and vermin proof with proper ventilation slots, IP 52 free standing floor mounted with copper busbar o suitable size for phase and neutral mounted on hygroscopic insulators comprising of the following: |
| 48 | INCOMERi) MCCB 4 pole 200 A, incomer, 415V, 50Hz, 16 KA -01 No.ii) Change over switch, 4 pole 200 A, incomer, 415V, 50Hz, 50 KA - 01 No.OUTGOINGi) MCCB 4 pole 100 A, incomer, 415V, 50Hz, 16 KA - 01 No.(Main office Bldg)ii) MCCB 4 pole 63 A, 415V, 16 KA - 03 Nos.(Centrifugal Pump 25HP-2, Submersible pump 15Hp-1)iii) MCB 4 pole 40 A, 415V, 16 KA -02 Nos (Pump 5HP -1, Bldg -1).iv) MCB 2 pole 16-40 A, 230V, 10 KA - 02 Nos (Chlorine gas plant -1, Alum dozing pump -1).v) FASD Startor 25 HP -02 Nosvi) FASD Startor 15 HP -01 Nosvii) FASO Startor5 HP -01 Nos |
| 49 | BUSBAR400 A rated Al bus bar with colour coded heat shrinkable sleeveMETERING & INDICATIONi) Ammeter, Digital type, with suitable CTS (0-400A) - 01 setii) Voltmeter, Digital type (500V) - 01 setiii) R-Y-B phase indicating lamp- CM set(iv) Internal wiring with suitable size of PVC insulated stranded copper conductor duly crimped with copper lugs ferruled. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender