Tender for Tender for Construction Work Comprising Boundary Pillars, Wire Fencing, And A Guard/Watchman Room On Departmental Land Within The Premises Of The Bewar Barrage, Under The Irrigation Division, Etah.
Tender Value
6.88 Crore
Estimated cost
Bid Submission
09 Sep 2026
4 days left
EMD
13.77 Lakhs
Bank guarantee accepted
Document Fee
7900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Etah → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Comprising Boundary Pillars, Wire Fencing, And A Guard/Watchman Room On Departmental Land Within The Premises Of The Bewar Barrage, Under The Irrigation Division, Etah.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60 M as per direction of Engineer -in- charge. |
| 2 | Dismantling of existing plaster including disposal of refuse within 60 metre |
| 3 | Racking of joints of brick work in cement or lime to depth of 1 cm. (3/8)\\" including disposal of refuse within 60 metre |
| 4 | Earth work excavation in foundation in dry ordinary soil including lift up to 1.50 m and lead up to 30.00 m including back filling, watering and ramming of excavated earth into the structure and the sides of foundation trenches and removal and disposal of surplus earth as directed by Engineer in charge upto a distance of 30m from the foundation trenches. |
| 5 | E/W in cutting or in embankment in ordinary soil,excavation to be in the form of regular pits not exceeding 0.50M in depth and earth work in embankment to be in 20 cm. layers,including ramming and dressing the surface to the required levels,slope and also including 1.5 meter lift and 30 meter lead. The earth in form cutting to be used as spoil banks within 50M distance as directed by Engineer in charge. |
| 6 | Earth work in filling by power transported earth with a lead beyond 200 m. and up to 1.00 km. including excavation, loading,unloading ,manual compaction, dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. orderss. |
| 7 | Providing and laying lean cement concrete of M10 (1:3:6) mix for base conc as per approved drawing with approved quality of coarse sand of F.M. not less than 2.25 and 10-20 mm graded coarse aggregate including cost of all materials, labour charges, curing work, T&P etc. required for proper completion of the work in all conditions of site excluding dewatering. |
| 8 | Providing and laying lean cement concrete of M15 (1:2:4) mix for base conc as per approved drawing with approved quality of coarse sand of F.M. not less than 2.25 and 10-20 mm graded coarse aggregate including cost of all materials, labour charges, curing work, T&P etc. required for proper completion of the work in all conditions of site excluding dewatering. |
| 9 | Reinforced Cement Concrete work for Super structure of M 20 A20 (1:1.5:3) mix coarse sand of F.M. not less than 2.25 and 20 mm graded coarse aggregate including cost of all materials, labour charges, curing work, T&P etc but excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessasary centering and shuttering. required for proper completion of the work in all conditions. |
| 10 | Supplying and laying TMT Steel bar reinforcement as per approved drawing, including removal of rust, cutting, bending, binding, placement with proper overlapping, providing chairs etc. required.The item includes cost of all material, labour charges, providing & binding with 24 BWG binding wire, T&P, taxes etc. required for proper completion of the required work. |
| 11 | Centering and shuttering of C.C. work including rent of shuttering material, labour and T&P required for proper completion of work for slab,lintal,sun shades, column & walls etc |
| 12 | Class - 150 ( Non modular ) brick work in 1:4 cement and coarse sand of FM not less than 1.25 mortar in foundation & superstructure including supply of all material, labour and T&P etc. required for proper completion of the work. |
| 13 | Ruled Pointing of brick work with cement mortar of mix 1:3 ( 1cement : 3 Fine Sand ) |
| 14 | Providing 12mm thick Cement Plaster (1:4) with cement and coarse sand not less than 1.25 FM including all cost of materials, Scaffolding, T&P, and lab our etc. required for proper completion of work up to 3.00 M height. |
| 15 | Brick ballast i/c all material T&P taxes |
| 16 | Providing and laying of APP ( Atactic Polypropylene Polymer ) modified prefabricated 5 layer 3mm thick water proofing membrane , black finish reinforced with non-woven polyster matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40ltr / Sqm by the same membrane manufacturer of density at 25̊C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameteres of the membrane shall be used under : Joints strength in longitudanal and transverse direction as 300/250N. Softening point of membrane not less than 150 ̊C. Cold flexibility shall be upto -2 ̊C when tested in accordance with ASTM, D- 5147. The laying of membrane shall be got done through the autherised applicator of the manufacturer of membrane: 3mm thick |
| 17 | Providing and Laying of 40mm thick Cement Concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement slurry, but excluding the cost of nosing of steps etc. complete |
| 18 | Providing and fixing angle iron frame for doors, windows and ventilators of mild steel angle sections of size 35X35X5mm, joint mitred and welded by iron angle 35X35X5mm or 35X5mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of neccessory butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engg.-in-charge |
| 19 | Mild steel iron 'Z' section windows and ventilators excluding cost of glass panes of but including supply of all materials, its febrication, nuts and bolts, holdfast, labour and T&P required for proper completion of work as per direction of Engineer-in -charge and also including cost of handles, stays etc in all respect at site of work. |
| 20 | Provinding and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with 4.0 mm thick panes. |
| 21 | Supply and fixing of 32mm Thick flush doors, commercial quality conforming of I.S. 2202 part-1(1983) icluding ISI including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, hndles, springs, fitting with necessary screws to be supplied departmentally. |
| 22 | Providing and laying ceramic glazed wall&floor tile of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality confirming to IS:15622 of approved make in colour such as white, ivory, grey fumered brown laid on 20mm thick cement mortar 1:4CM jointing with grey cement [email protected]/sqm including pointing the joints white cement and matching pigment etc . |
| 23 | Providing and laying vitrified floor tiles in 600 x 600 mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 24 | Wall painting ( two coats ) with plastic emulsion paint of approved brand and manufacture on decorative walls surface to give an een shade including thou\roughly brushing the surface, clean all dirty, grease loose pieces and prepare smooth surface including cost of all matertial, labour, T&P etc. complete required for proper completion of work. |
| 25 | Finishing walls with Acrylic Smooth exterior paint ( Apex) of required shade : New Work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20m kg/10 sqm) : Per Sqm. (including Scraping old white/colored wash including disposal of refuse within 60 metres) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture:Per Sqm. |
| 27 | Finishing Walls (Two Coats) with water proofing cement paint with approved make such as super snowsem, Durocem, Robiance, Guttucem, Supercem Quality and of required shade on undecorated wall surface over and including one Coat white cement primer to give an even shade after thoroughly brushing the surface, including cost of all material, Labour, T&P etc. complete required for proper completion of the work. |
| 28 | Supply & Laying of I shaped precast interlocking tiles of thickness 80mm rubber moulded coloured (compressive strength not less than 30 Mpa and weight 4.50 kg) including 25mm thick local sand base leveling and dressing of surface to required level and slope, filling ,joints with local sand all completed work |
| 29 | Steel work in built up tubular( round,square or rectangular hollow tubes etc.) truses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.( Hot finished welded type tubes ) |
| 30 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (MS Angles of 75X50X5) |
| 31 | Supply and Fixing of Pre-cast Cement Concrete Readymade Fencing Pole as per detail - Post Size - 2700X150X150 in mm, Post Size - 2700X150X150 in mm,Reinforcement - Verticle Bars - 6 Nos of 8mm Dia, Rings - 8mm dia @ 150mm C/C,Foundation Concrete (1:2:4) and Size - 300X300X600 in mm, P.C.C. under foundation - 1:4:8, and including Eartwork excavation and filling with proper compaction, transport,T&P etc Complete in all Respect as directed by Engg.-in-Charge. |
| 32 | Providing GI barbed wire ( hot dip) iron wire fencing in three rows including fixing it to post after stretching it including labour and tools and plants etc. required for proper completion of the work also including supply of wires (14x14 SWG) with 100 mm barb spacing (@11.66 m per kg wt) and excluding supply of posts. |
| 33 | Installation of 1.5 HP submersible pump set including boring and all fittings cost of all material, labour, tools, and plants etc. required for proper completion of work. |
| 34 | Providing and Laying Non Pressure NP-3 class (medium duty ) R.C.C. Hume pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including of joints etc. complete (1200mm dia RCC pipes, Laying manual/mechanical means) |
| 35 | Uprooting jhunds and moonj with disposal away from site |
| 36 | Laying brick on edge soling laid dry filling joints i/c preparation to base proper slope and its ramming i/c all labour t&p etc required for proper completion of work. |
| 37 | Providing and Fixing chlorinated polyvinayal chloride(CPVC) pipes having thermal stability for hot & Cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe & Fitting, with one step CPVC solvent cement and the cost of cutting chasees and making good the same including testing of joints complete as per direction of engineer-in -charge. concealed work,including cutting chases and making good the wall etc.( 16 mm nominal outer dia pipe) |
| 38 | Providing and Fixing chlorinated polyvinayal chloride(CPVC) pipes having thermal stability for hot & Cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe & Fitting, with one step CPVC solvent cement and the cost of cutting chasees and making good the same including testing of joints complete as per direction of engineer-in -charge. concealed work,including cutting chases and making good the wall etc.( 25 mm nominal outer dia pipe) |
| 39 | Providing and Fixing chlorinated polyvinayal chloride(CPVC) pipes having thermal stability for hot & Cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipe & Fitting, with one step CPVC solvent cement and the cost of cutting chasees and making good the same including testing of joints complete as per direction of engineer-in -charge. concealed work,including cutting chases and making good the wall etc.( 32 mm nominal outer dia pipe) |
| 40 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighing not less than 690 gms. (15mm nominal bore) |
| 41 | Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to IS:8931 (15mm nominal bore) |
| 42 | Providing and fixing C.P. brass angle valve for basin mixer and geyser point of approved quality confirming to IS:8931 (15mm nominal bore) |
| 43 | Providing and fixing stainless steel grating of approved quality and colour. ( 100 mm dia) |
| 44 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes confirming to IS : 13592 Type A, including jointing with seal ring confirming to IS: 5382, Leaving 10mm gap for thermal expansion, (i) Single socketed pipes.- 110 mm diameter |
| 45 | Providing and fixing PVC pipe confirming to IS make working pressure 4 kg/sqcm including testing labour T&P and all complete fittings. - 110mm dia meter |
| 46 | Providing and fixing white vitreous china pedstal type water closet( European type W.C. pan) with seat and lid, 10ltr low level white PVC flushing cistern, including flush pipe, with manually controlled device(handle lever),comfirming to IS :7231,with all fitting and fixtures complete,including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 47 | White viterous china wash basin size 630x450 mm with a single 15mm C.P. brass piller taps. |
| 48 | Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per IS 13983 with C.I. bracket and stainless sink plug 40mm, including painting and bracket,cutting and making good the walls wherever required.(ii) 610x460 mm bowl depth 200 mm |
| 49 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete. Flexible pipe 32mm |
| 50 | Supply and hoisting of sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes,labour and T&P etc. for proper completion of work. Tank shoild be ISI marked, Sintex or equivalent.( For 500 litres) |
| 51 | Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,piano type switch & ceiling rose/angle/battenholder on 3mm thick phenoliclaminate backlite sheet etc. complete in all respect ,as directed including matching colour. |
| 52 | Wiring point for fan/fresh air fan ( light duty exhaust fan) with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,piano type switch & ceiling rose/angle/battenholder on 3mm thick phenoliclaminate backlite sheet etc. complete in all respect ,as directed including matching colour. |
| 53 | Wiring point for plug with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,piano type switch & ceiling rose/angle/battenholder on 3mm thick phenoliclaminate backlite sheet etc. complete in all respect ,as directed including matching colour. |
| 54 | Wiring point for call bell with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire,piano type bell push or 2 pin socket etc. complete in all respect ,as directed including matching colour. |
| 55 | Wiring point for exhaust fan with 1.5 sq.mm FRLSH PVC insulated multistrand copper conductor cable in PVC conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, 15 A piano type switch & ceiling rose/angle/battenholder on 3mm thick phenoliclaminate backlite sheet etc. complete in all respect ,as directed including matching colour. |
| 56 | Add for light/fan point with modular type switch in place of piano types witch. |
| 57 | Add for plug point with modular type switch in place of piano types witch & socket. |
| 58 | Add for HPMV/Exhaust fan point with modular type switch in place of piano types witch. |
| 59 | Add for call bell point with modular type switch in place of piano types bell push. |
| 60 | Supply and wiring of submain with one number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade mltistrand single core copper conductor cable in 20 mm dia heavy duty(2mm thick) PVC pipe concealed in wall,complete with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. |
| 61 | Supply and wiring of submain with one number 6.0 sq.mm. FRLSH PVC insulated 1100 V grade mltistrand single core copper conductor cable in 25 mm dia heavy duty(2mm thick) PVC pipe concealed in wall,complete with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender