Tender For Provisioning Of Fire Alarm System Along With Firefighting Equipment In Djb Laboratory At Ee(Sdw)-Viii
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Sep 2026
11 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provisioning Of Fire Alarm System Along With Firefighting Equipment In Djb Laboratory At Ee(Sdw)-Viii
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of one Loop Fully addressable fire detection and fire alarm system with power supply arrangement ,compatible with IS: 2189:1999 tested by ERTL/ UL Certified Make ASES/ Bosch/Honeywell/DJB approved |
| 2 | Supply Manual call point A breakable glass cover fixed in such a way that the actuating push button is kept depressed as long as the glass is intact and released when the glass is broken. The manual call points shall be suitable for surface or fully / partly recessed mounting. 5 mm high red painting/ printed word “IN CASE OF FIRE BREAK GLASS” shall be provided on the front face. The manual call pint shall be compatible with all conventional control panels, Make Make ASES/ Bosch/Honeywell/DJB approved |
| 3 | Electronic hooter 11 db/ 24 V DC with strobe (ABS-V) The enclosure shall be 1.5 mm thickness duly painted and marked “FIRE ALARM”. All hooters shall produce a similar sound and shall maintain the same during their operation. Make ASES/ Bosch/Honeywell/DJB approved |
| 4 | Providing & Fixing of Smoke/ Heat/ Multi Detectors ,The detector while sensitive to all type of smokes & heat will be insensitive to ambient lights, air drafts and changes within the operating temperature and voltage ranges. The detector shall meet the requirements of either EN 54/ FM/UL or LPC and shall be specifically approved by FM/ UL/ LPCB. Make ASES/ Bosch/Honeywell/DJB approved |
| 5 | Providing and fixing of Response Indicator Lamp assembly consisting of lamp holder and lamp shall be suitable for mounting on walls, partition etc. The hosing shall be suitable for surface/ flush mounting of 1.5 mm thick sheet and the facia 3 mm acrylic mounted outside the cabin and directly connected to the lamp should flicker but in the event the detector inside the cabin senses a fire, the lamp should glow. |
| 6 | Supply and laying 2 x 1.5 sq mm PVC insulated and sheeted stranded copper wire. Wiring for fire alarm system in general shall comply with IS: 2189 and IS: 732- amended up to date. The detectors shall be wired by ISI marked 1.5 sq mm. PVC insulated stranded FRLS copper conductor wires of 1100 volts grade as required and desired on site. Crimping type of lugs are also included in the rates of laying wires and its connections. PVC insulated copper conductor cables should confirm to IS:554 (part-I). make national/ plaza/ Kalinga /DJB approved |
| 7 | Supply and laying 4 x 1.5 sq mm. PVC insulated and sheeted stranded copper wire. Wiring for fire alarm system in general shall comply with IS: 2189 and IS: 732- up to date. The detectors shall be wired by ISI marked 1.5 sq mm PVC insulated stranded FRLS copper conductor wires of 1100 volts grade as required and desired on site. Crimping type of lugs are also included in the rates of laying wires and its connections. Make national/ Plaza/ Kalinga /DJB approved |
| 8 | Supply and installation of SMF Batteries with suitable rating as required for 24 Hours backup from Exide/ standard/ Amco/ Prestolite/ /DJB approved |
| 9 | Signage with backlit facility for Control building marking for various Fire/ emergency exit points. |
| 10 | Supply and laying of PVC conduit pipe 25 mm as per requirement of site. |
| 11 | Supply and installation of ABC type fire extinguishers of capacity 9 Kg having pressure guage with wall stand Make Impulse fire/ Blowout/ ceasefire |
| 12 | Complete testing and commissioning and trial of the smoke detector with small heat/smoke generation at site with all tools and manpower at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender