Tender For General-Bus Shelter At Mananchira (Muthalakkulam ), Kozhikode On Old Nh 66-Bus Shelter At Mananchira (Muthalakkulam )-Electrification-General Electrical Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Sep 2026
6 days left
EMD
5279
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Bus Shelter At Mananchira (Muthalakkulam ), Kozhikode On Old Nh 66-Bus Shelter At Mananchira (Muthalakkulam )-Electrification-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrification |
| 2 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 3 | 1.17.6:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm |
| 4 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 5 | OD126663/2026-2027:Supply and wiring with ISI marked, FRLS PVC insulated following size single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 1 run 16 sq. mm |
| 6 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 7 | 90.6.6.1:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.1.50 sq mm |
| 8 | 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 9 | 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 10 | 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 11 | OD121067/2026-2027:Supply, installation, testing and commissioning of of LED Inground Luminaire having power consumption not more than 6W and light output not less than 450 Lumens with a nominal efficiency 75lumen/watt. The housing should be of alluminium pressure Die cast with IP67 and IK10 Protection.The Luminaire should be having Minimum 30000 Burning hours(L70B50) with CRI ≥70, SDCM< 5 and co-related colour temperature (CCT) of 3000-4000K. The Luminaire should have a 4 KV in the Luminaire. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire with PF>0.95 and THD<10%.Luminaire and driver shall be separately BIS approved of same make equivalent to Philips BBP141 30K24VDC 10D 6W / kesslec /Osram. LM80,LM79 ,Type Test certificate and Bis certificate need to be submitted. |
| 12 | OD121068/2026-2027:Supply, installation, testing and commissioning of 20W LED E27 suspended pendant light, having black-finished metal body with plain clear glass diffuser, complete with E27 lamp holder, 20W LED E27 lamp, ceiling canopy, hanging kit and all necessary mounting accessories, including required length of 16/0.20 mm 3-core round copper flexible wire conforming to relevant IS standards or extension of existing wiring, including all electrical connections, termination, making good damages, colour washing andfinishing as required, complete in all respects. Philips Cormorant Pendant, Model No. 800086, or technically equivalent approved make. |
| 13 | OD126610/2026-2027:Supply , Conveyance, Installation, Testing and commissioning of Track Light Luminaire having a power consumption of maximum 20W and a light output of minimum 1600 lumens, with a system efficacy of more than 80 lm/W. The luminaire housing shall be made of aluminium with a PC diffuser. The luminaire shall have a minimum lifetime of 30,000 burning hours at L70B50, CRI ≥80, SDCM <5, and CCT of 4000K. LEDs used shall be from Lumileds, Osram, or Bridgelux only. The driver shall have integrated 4 kV surge protection, PF ≥0.95, THD <10%, and an operating voltage range of 220–240V AC. Both the luminaire and driver shall be separately BIS-approved and of the same make. The luminaire shall be equivalent to Philips, Wipro, or Havells. LM-80, LM-79, Type Test Certificate, including giving connection with required length of wire etc. as required (Philips model No.ST033T G2 LED17/940 20W / Techno commercial equivalent approved by engineer in charge ) |
| 14 | OD126609/2026-2027:Supply , Conveyance, Installation, Testing and commissioning of 2-meter-long compatible track rail for the abovementioned track light luminaire, suitable for the required power supply arrangement, complete with necessary end caps, connectors, suspension/mounting accessories, and all required hardware for proper installation and operation. including giving connection with required length of wire etc. as required (Philips model No.RCS033 1C L2000 BK / Techno commercial equivalent approved by engineer in charge ) |
| 15 | OD127067/2026-2027:Supply, conveyance, installation, testing and commissioning of 5W LED 1 way wall washer light and light output not less than 475 Lumens WW, black color (Dimensions 78 x 87 x 43 mm) with IP65 directly on surface including giving connections with required length of 16/0.20 mm 3 core round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, making good the damages, colour washing etc as required. (Make: Phillips Radiant 1 way or Techno commercial equivalent approved by engineer incharge) |
| 16 | OD127144/2026-2027:Supply and providing of 3pin/3pole IP68 waterproof connector complet set rating of 10-13A ,240V AC suitable for 3core 1.5 sq mm copper wire/ cables and giving necessary connections etc as required |
| 17 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 18 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 19 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 20 | OD126611/2026-2027:Supplying and fixing 0.5 amps to 4 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB/panel board complete with connections, testing and commissioning etc. as required.Single pole |
| 21 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 22 | OD121564/2026-2027:Supplying and fixing 24Hours Digital Time Switch for operating ON-OFF function in the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required. (L&T make Digital Time switch 2 module cat no 67DDT0 or Techno Commercial equivalent approved by engineer in charge) |
| 23 | OD126616/2026-2027:Supplying and fixing following rating type, 2 pole contactor in the existing MCB DB/Enclosure/Panel board complete with giving necessary connections, etc. as required. suitable for AC-1& AC-3, 9A, 25A ( L&T make MNX 9 or Techno commercial equivalent approved by engineer in charge). |
| 24 | OD126618/2026-2027:Supply and fixing following rating Surge Protection Devices (1P+N) ,Conforms to IEC 61643-11, Type 1+2(Protection against direct and indirect lightning surges) , Maximum Discharge Current - Imax up to 50 kA in existing MCB DB/ cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (L&T make or Techno commercial equivalent approved by engineer in charge.) |
| 25 | OD126619/2026-2027:Supplying and fixing following rating miniature type double pole AC change over switch with centre OFF in the existing MCB DB/Enclosure complete with connections, testing and commissioning etc. as required. 40 A, 2 pole, 2 way ( L&T make or Techno commercial equivalent.) |
| 26 | OD126667/2026-2027:Supply and wiring with ISI marked, FRLS PVC insulated following size single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 1.5 Sq mm single run |
| 27 | OD126668/2026-2027:Supply and wiring with ISI marked, FRLS PVC insulated following size single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 4.00 Sq.mm single run |
| 28 | OD126886/2026-2027:Supply and installation of dust and vermin proof thermoplastic polycarbonate enclosure of 300 x 450 x 170mm size with hinged Transparent lid, hand operatable screws, fixing rails,Earth connector strip,PVC cable duct ,pad lock facility and with knock outs on side walls etc ,as required - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, degree of Ingress Protection IP 65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded.fixing it on wall with screws , nuts ,bolts, washers etc are should be of stainless steel , making good the damages colour washing etc. as required. (Hensel make model Mi 9300 or Techno commercial equivalent approved by engineer in charge). |
| 29 | OD126660/2026-2027:Supply and installation of dust and vermin proof thermoplastic polycarbonate enclosure of 300 x 300 x 214mm size with hinged Transparent lid, hand operatable/locking screws, fixing rails,pad lock facility and with knock outs on side walls etc ,as required - environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive, degree of Ingress Protection IP 65 in accordance with IEC 60529, gasket material of enclosure is Polyurethane; while the gasket is internally embedded.fixing it on wall with screws , nuts ,bolts, washers etc are should be of stainless steel , making good the damages colour washing etc. as required. (Hensel make model Mi 9210 or Techno commercial equivalent approved by engineer in charge). |
| 30 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 31 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 32 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 33 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 34 | 90.14.7:Supply and providing copper earth bus in the panel board |
| 35 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 36 | OD84268/2026-2027:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate |
| 37 | OD84269/2026-2027:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system |
| 38 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 39 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 40 | OD84274/2026-2027:Supply and providing 25x3mm brass nut and bolt etc. as required. |
| 41 | OD84275/2026-2027:Supply and providing 25x6mm brass nut and bolt etc. as required |
| 42 | OD84281/2026-2027:Supply and fixing 32, HRC Fuse Base with HRC Fuse link in the existing meter board and giving connections etc. as required |
| 43 | OD84282/2026-2027:Supply and fixing 32A, 2 way neutral link mounted on DMC/ SMC base in the existing box and giving connections etc. as required |
| 44 | OD126888/2026-2027:Supply and providing suitable Iron Hook grouted on wall for binding the service wire |
| 45 | OD126877/2026-2027:Supply and providing 6 Sq.mm Aluminum conductor 2 core Weather proof service wire including giving connection as required. |
| 46 | OD126878/2026-2027:Supply and providing Nylon stay wire for supporting weather proof service wire including binding the WP wire using Alu.wire as required. |
| 47 | OD126879/2026-2027:Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required2.5 cm, 4 cm, 5 cm height |
| 48 | OD127379/2026-2027:Amount to be deposited in KSEB towards the Connection fee.(Actual amount will be reimbursed on production of original documentary evidence) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender