Tender For Supply, Installation, Testing And Commissioning Of Diesel Generator (Dg) St For Building ‘B, New Market Complex Porvorim Goa
Tender Value
94.16 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
14 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Installation, Testing And Commissioning Of Diesel Generator (Dg) St For Building ‘B, New Market Complex Porvorim Goa
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 2 | Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m. : Ordinary Soil |
| 3 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 60mm. |
| 4 | Relaying of existing Shot blasted cement concrete interlocking paver block available on site with any design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in charge. |
| 5 | Earthwork in excavation in foundation, pipeline trenches, drain (not exceeding 1.5m in width or 10 sq.m. on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc. as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited). |
| 6 | Earthwork in excavation over areas (exceeding 30cms in depth, 1.50m in width as well as 10sqmts on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited). |
| 7 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 8 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.A. Sand |
| 9 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.B. Moorum |
| 10 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 11 | Half brick masonry usign fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand ) with bricks of class designation 40 kgs / cm2. : In foundation and plinth 200 x 95 x 95 |
| 12 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: (a) All works upto plinth level |
| 13 | Centering & shuttering including Strutting, Propping & removal of forms for :a. Foundations, Footings, Bases for columns |
| 14 | Centering & shuttering including Strutting, Propping & removal of forms for :b. Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 15 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level : M-25 grade of concrete |
| 16 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. : size 750 x 400 x 100 mm cm with reinforcement not less than 4.2 kg per unit |
| 17 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 18 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.: In tees, angles, flats and channels. |
| 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 20 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 21 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 22 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 23 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 24 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 25 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. |
| 26 | Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 27 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. : 180 mm nominal size |
| 28 | Extra for providing and fixing prince or equivalent make PVC SWR stop end outlet with one clamp for socketed half round eaves gutters. :180 mm nominal size |
| 29 | Providing and fixing PVC SWR pipes confirming to IS 13592 type A including jointing with seal ring confirming to IS 5382 leaving 10 mm gap for thermal expansion. : Single socketed pipe 110 mm dia |
| 30 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. : 110 mm dia |
| 31 | Cleaning the surface and filling cracks (if any), applying epoxy putty wherever necessary, Providing and applying 3 coats of High performance moisture compatible corrosion resistant Food grade non toxic epoxy stearate coating (WATERSEAL) having impermeable film withstanding to hydrostatic pressure up to 5 kg/cm2 with a DFT of 250 microns on the prepared RCC surface. If there is honey combing or excessive unevenness in the surface then 10mm plaster in CM 1:3 should be applied on the entire surface followed by application of 2 coats of WATERSEAL with a DFT of 150 microns. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 32 | Extra for providing and fixing prince or equivalent make PVC SWR 90 deg. Elbow with /without outlet with 2 clamps for socketed half round eaves gutters. : 140 mm nominal size |
| 33 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.A. Supply of 4 Core 300 sq.mm Al armoured Cable |
| 34 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(b) In rocky strata |
| 35 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 300 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 36 | Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 81.90 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 690 ltr etc., on provided M20 grade CC foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG |
| 37 | Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints as per specification no. EA-EP. |
| 38 | Supply, installing, and testing of maintenance free earthing comprising of electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity (min. 125kg) complete, and recording the results specification no. EA-MF |
| 39 | Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for Diesel generating set of above 500 kVA upto 750 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF. |
| 40 | Supplying, erecting, testing and commissioning of LV ATS Panel 800 amps duly fabricated with 16 swg duly powder coated with 8oo amps 4 pole EDO ACB incomer towards DG supply and 12 nos outgoing feeders with ATS 12 nos , 125 amps 4 pole 3 nos, 100 amps 4 pole , 2 nos and 63 amps 4 pole 7 nos with incomer MCB & MCCB for GED supply and DG Supply. |
| 41 | Armoured PVC/XLPE 1100 V cable 2 core 2.5 sq.mm copper |
| 42 | Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.A. 2 core x 1.5/2.5 Sq. mm. |
| 43 | Armoured PVC/XLPE 1100 V cable 4 core 2.5sq.mm copper |
| 44 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 4 core x 1.5/2.5 Sq. mm. |
| 45 | Shielded, twin twisted, stranded 4 x 1.5 sq.mm FRLS copper conductor |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.a. 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit) |
| 47 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.b. 4 x 16 sq.mm + 2 x 16 sq.mm earthwire (40mm Conduit) |
| 48 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.c. 4 x 25 sq.mm + 2 x 25 sq.mm earthwire (50mm Conduit) |
| 49 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender