Tender For Sewerage Scheme For Shimla Town ( Sh:- Replacement Of Old Defunct/Damaged Sewer 100 Mm Pipeline Under Rajdoot Hotel And Brighton Cottage Fagli Under Stp Lalpani.
Tender Value
14.99 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
2 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sewerage Scheme For Shimla Town ( Sh:- Replacement Of Old Defunct/Damaged Sewer 100 Mm Pipeline Under Rajdoot Hotel And Brighton Cottage Fagli Under Stp Lalpani.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of rock/hard strata/Black top manually/ by mechanical means disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 2 | Excavation in foundation, trenches etc., in earth work in all type of soil such as pick work, jumper work, blasting work Kankar, moorum shingles including decomposed soft and hard rock i/c cutting of top of metelled road etc., upto all heights stacking the excavated earth not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15cm. layers, when required into plinth and sides of foundation etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth up to all leads and lifts etc., complete in all respect. |
| 3 | Providing, laying jointing & testing in trenches centrifugal cast ductile iron (spun) pressure pipes as per IS:8329/2000 Class K-7 duly ISI marked, inside cement mortar lined suitable for tyton (push on joints) for sewer lines including cutting of pipes, chamfering where required (earth work in trenches and jointing of pipes to be measured and paid for separately) including carriage up to the site of work, testing etc., complete as per instructions of the Engineer-in-charge. |
| 4 | 150 mm |
| 5 | Providing & fixing in trenches centrifugal cast ductile iron fittings of 9523/2000 class A, series K-12 with inside cement mortar lined suitable for tyton (push on joints) with sewers, such as socketed bends of all degrees, socketed, tees, collars and all other required fittings, including carriage up to the site of work, testing etc. complete as per instructions of the Engineer-in-charge. (earth work in trenches and jointing of fittings to be measured and paid for separately). |
| 6 | 150 mm dia double socket DI Bend of require degree |
| 7 | 90 degree |
| 8 | 45 degree |
| 9 | 22.5 degree |
| 10 | 11.25 degree |
| 11 | DI Tee 150X150X150mm |
| 12 | DI Tee 150X150X100mm |
| 13 | MJ Collar 150 mm dia |
| 14 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket confirming to IS 12820/1989 complete as per direction of Engineer-in-charge. |
| 15 | 150 mm |
| 16 | Providing and laying in position cement of specific grade excluding the cost of entering, shuttering, finishing and reinforcement - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) complete as direction of Er.-in-charge. |
| 17 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) complete as direction of Er.-in-charge. |
| 18 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- Foundation ,footings basis of columns etc and mass concrete complete as direction of Engineer-in-charge. |
| 19 | Providing fixining of SFRC frame cover dia 560mm manufacture as per BIS:12592 (Part 1 &2) for Manhole/sewer chamber of load capacity of 20 MT complete installation as per direction of er-in-charge. |
| 20 | Providing mild steel/tor steel reinforcement for RCC work includng bending binding and placing in position complete upto level @60kg/m^3 as per the direction of er in charge. |
| 21 | Stone soiling properly hand packed for the restoration of damaged properly complete as per the direction of Engineer-in-charge. |
| 22 | Disposal of moorum/rubbish/waste material from site to Dispasal site specified by MC i.e Bharyal complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender