Tender For Estimate For Laying Of Upvc Up Gradation Pipeline Outlet Rd 53500/L Of Amloh Minor
Tender Value
25.46 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
50929
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Laying Of Upvc Up Gradation Pipeline Outlet Rd 53500/L Of Amloh Minor
BOQ
| Sl. No. | Item Description |
| 1 | Excavation by mechanical means (JCB or hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including dressing sides levelling of beds of trenches to correct grade, cutting joint holes,refilling consolidation, including the cost for diversion for traffic, crossing over trenches for accesss to houses, watching, fencing etc and removal of surplus soil outside / inside the town involving lead upto 15 meter complete |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick- Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed with in lead of 30 metres |
| 3 | First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement . |
| 4 | 10mm thick cement plaster 1.4 on sides walls |
| 5 | 10mm thick cement plaster 1:4 on bed and top. |
| 6 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement |
| 7 | Cement Conc.1:2:4 including supply, carriage & with stone ballas or shingle |
| 8 | Cement concrete 1:4:8 with brick ballast 40mm gauge |
| 9 | Laying, fixing & jointing of upvc Pipes (Type-A) as per IS- 4985:2021, (ISI marked with the prior approval of Engineer in Charge) along the trenches and laying the same in trenches to correct alignment and radients,cutting, jointing and testing complete as per specifications.(250mm o/d pipe of 6kg/sqcm) |
| 10 | Laying, fixing & jointing of upvc Pipes (Type-A) as per IS- 4985:2021, (ISI marked with the prior approval of Engineer in Charge) along the trenches and laying the same in trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (160mm o/d pipe of 6kg/sqcm) |
| 11 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank |
| 12 | Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 |
| 13 | Providing and fixing of Alfa Valve fitted on riser pipe to act as Nakka (Dregulators) |
| 14 | Centreing & shuttering for Concerte faces |
| 15 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect |
| 16 | Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications |
| 17 | Water Bound Macadam Grading II (without screening for low volume Roads / undersigned Roads).Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications |
| 18 | Tack Coat @ 1.00 Kg per sqm( for WBM patches where surface dressing not applied), Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 1.00 kg per sqm on the prepared granular surface after cleaning the surface complete as per technical specifications |
| 19 | Open-Graded Premix Surfacing 20mm thickness. Providing, laying and compaction of open graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-30 @1.46kg per sqm,laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. |
| 20 | Seal Coat Type B. Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-30 @ 0.68 kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications |
| 21 | Providing and fixing Elbow/bends of 90 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 22 | Providing and fixing Elbow/bends of 45 degree 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 23 | Providing and fixing equal Tee of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 24 | Providing and fixing Unequal Tee 250x250x150mm of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge |
| 25 | Providing and fixing Tail end piece 250 mm of 6kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge |
| 26 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gun metal) working parts Sluice Valves (250mm) ISI marked 14846-2000,including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in- charge). B) Class PN-1.6 as per ISI |
| 27 | Providing & fixing double air valve ISI Marked as per IS- 14845 including jointing all carriages completess. C.I Double air valve (Size150mm) |
| 28 | 20 hp photovoltaic water pumping system submersible motor pump set of 20HP (26550 wp ) Capacity, Solarpv array of 20 hp.Hot dip galvanized module mounting structure cable with stand 150/km/hr wind speed, installation of 4 nos earth pit. The scope converts rthe entire installation process, successful commissioning and comprehensive maintained contract for period of 5 year which include all parts and service. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender