Tender For Construction Of Toilet Block At Ward No.5 Vagaray Alayam Town Panchayat Office Buliding C Us In Moppiripalayam Town Panchayat.
Tender Value
11.25 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
8 days left
EMD
22500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Block At Ward No.5 Vagaray Alayam Town Panchayat Office Buliding C Us In Moppiripalayam Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation and depositing on bank with initial lead and lift etc. completely I hard stiff clay, stiff black hard redearth, shales, gravelstony earth and earth mixed with small size boulders and hard gravelly soil etc., compltete as per standard specification (SS20B) |
| 2 | Plain Cement Concrete 1:4:8 Mix (one part cement, four part Msand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. |
| 3 | Supplying and erectioning steel sheet centering and shuttering including necessery supports for plain surface in foundation and basement for RCC roof rectancular or T beams, L beams, lintel and bedblock staircase waist slap and landing beam etc., with all bracing using M.S sheets spaced at 75cm C/C etc., completly complying with standard specifications. |
| 4 | Column |
| 5 | Plinth beam |
| 6 | Roof Slab |
| 7 | Supplying and fabricating and placing in position of MS or RTS rods for all rainforced works including cost of steel and binding wire and all labour for cutting and fabrication and other incidental charges etc., completly complying with standard specifications. |
| 8 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 9 | Brick Work in Cement Mortor 1:5 Mix (one cement, five Msand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 10 | Below Basement |
| 11 | Above Basement |
| 12 | Plastering in cm 1:5, 12 mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications. |
| 13 | Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete |
| 14 | Ceiling Plastering in cm 1:3, 10mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications. |
| 15 | Plastering in cm 1:4 20mm thick including cost and conveyence all materials to site and all labour charges and incidental charges etc.,completly complying with standard specifications. |
| 16 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm finished thickness with c.m 1:3-20mm Tk and polished with same color cement including all cost and convene of all materials etc.,complete |
| 17 | Dadooing sides of walls with Glazed tiles of size 0.30m x 0.20m x 0.006m including cost and conveyance and all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers. |
| 18 | Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug |
| 19 | Supplying and fixing UPVC,(Un-Plasticized Polyvinyl Chloride) Louvered Ventilators,of from the profile the size of outer frame 60mm x 58mm,and shutter profile size of 60 x 78mm both profiles are,reinforced with GI/1mm 125GSM and 100% corrosion,free, the profile are multi chambered sections with wall,thick of 2mm. The EPDM rubber (black colour) covered,with all over the edges of frame and shutter. The corners,and joints should be welded and cleaned. Radiations,pin headed glass 4mm thick should be provided in the,louvers. The window should be fixed to the wall with,100% packing with screws and silicon packing all round,the frames. The ventilator should be got approved from,the Executive Engineer before use on work |
| 20 | Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications |
| 21 | Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications. |
| 22 | Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications. |
| 23 | Supply of thousand ltr. capacity PVC (HDPE) water tank including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.1000 litre |
| 24 | Supplying and fixing in position colour glazed INDIAN TYPE WATER CLOSET with 'P' or 'S' trap including cost and conveyance of water closet and labour for fixing including flooring with brick jelly concrete etc., complete |
| 25 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 26 | Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoiresinflushwithwallwith3mmthickhylumsheetcoverwithTWswitchboxand5AFTswitchandmakinggoodoftheconcealedportionwithsuitablecolourforPVCconcealedlight(6points per coil) (for rooms like bath, toilet & pumproom, etc.) (S.D.26) |
| 27 | Wiringwith2x4sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorcableof1100VgradeinsuitablePVCrigidpipeconcealedinwallandceilingwithPVCaccessoriesinflushwithwallwith150mmx100mmx113mmTWswitchboxwith3mmthickhylemsheetfor15A3pinnoninterlockingwallsocketwith15Aflushtypeswitchwithcontinuousearthwireconnectionof4sq.mmcopperwireandmakinggoodoftheconcealedportionwithsuitablecolourfor concealed power plug point (SD 40) |
| 28 | Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb (SD 85) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender