Tender For Provision Of Weather Shelter/Gazebo And Connected B/R Items And Provision Of False Celing Alongwith Acp Cladding At P- 6 Building At Icgs Vadinar
Tender Value
19.08 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
21 days left
EMD
36165
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Weather Shelter/Gazebo And Connected B/R Items And Provision Of False Celing Alongwith Acp Cladding At P- 6 Building At Icgs Vadinar
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' B/R |
| 2 | Excavation in post holes, each not exceeding 0.50 cum, including getting out, and returning, filling in and ramming earth or broken rubble mixed with earth, around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m, and making good the surfaces, in soft/loose soil, all complete as specified. |
| 3 | Material and labour for cement concrete in foundation, filling and mass concrete, Type B2, 1:2:4 (40 mm graded aggregate), complete as specified. |
| 4 | Supply and fixing of steel work in tubular trusses, posts, purlins and rafters, including special shaped washers etc., using ERW or induction butt-welded tubes conforming to IS 1161:1998, Grade St-240, complete as specified. |
| 5 | Material and labour for providing 4 mm thick designer shingle mat of any colour and design pattern, at any height and slope, comprising mineral-stabilised, reinforced fibre-glass, high-grade asphalt overlaid with high-strength ceramic-coated granules on a mineral-stabilised, fire-retardant coating, including sealing of ridge/valley liner cover, laid with a forced torch gun over 16 mm thick cement asbestos plain sheet, fixed with self-tapping screws, and joints sealed with matching colour silicone, complete, all as specified and directed by the Engineer-in-Charge. |
| 6 | Material and labour for brickwork with fly-ash modular bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6, complete as specified. |
| 7 | Material and labour for 25 mm thick cement concrete, 1:2:4, Type B1 (using 12.5 mm graded aggregate), as levelling course, complete as specified and directed by the Engineer-in-Charge. |
| 8 | Material and labour for matt/polished finish vitrified ceramic tiles, 10 mm thick (square/rectangular), area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15 mm thick screed bed in cement mortar 1:6. |
| 9 | All as per Item No. 7 above, but 10 mm thick, in cement mortar 1:4, on vertical surfaces/skirting, complete as specified and directed by the Engineer-in-Charge. |
| 10 | Material and labour for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete as specified. |
| 11 | Material and labour for preparation of new plastered wall surfaces and applying two coats of 100% premium acrylic emulsion paint, having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, alkali- and fungal-resistant, dirt-resistant exterior paint of required shade (depot tinted), with silicone additives @ 1.43 litre/10 sqm, over and including a priming coat of exterior primer applied @ 0.90 litre/10 sqm, all as per the manufacturer's instructions, complete as specified and directed by the Engineer-in-Charge. |
| 12 | Material and labour for painting two coats on steel surfaces with synthetic enamel paint over one coat of red oxide primer, including preparation of surfaces, over 10 cm in width or girth, not otherwise described, complete as specified. |
| 13 | Supply and fixing of 605 x 605 mm grid GI framework for seamless ceiling, comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 mm and 30 mm and web of 27 mm, fixed to the surrounding wall using nylon sleeves and screws at 450 mm centre to centre; intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mm, suspended from the soffit at approximately 900 mm centre to centre with GI cleats and steel expansion fasteners; with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having a knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm, fixed to the intermediate channel at 457 mm centre to centre, complete as directed by the Engineer-in-Charge. |
| 14 | Supply and fixing Hangers, 6 mm dia GI (up to 1200 mm length), for level adjustment, fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size, 60 mm long, and expansion hold fasteners 12.5 mm dia, 40 mm long, complete as specified. |
| 15 | Supply and fixing of 8-10 mm thick PVC insulation panels with EPS stuck to 1 mm printed PVC sheet, suitably placed in false ceiling grid made of aluminium/GI/MS, as per specification of make Armstrong/Gyprock or equivalent, as approved by the Garrison Engineer (GE). |
| 16 | Providing and fixing, in repairs, aluminium composite panels in all colours of approved brand, for external/internal wall cladding at all heights and elevations, including necessary aluminium composite panel consisting of 3 mm thermoplastic core of anti-oxidant LDPE sandwiched between two skins of 0.5 mm thick alloy sheet, making a total sheet thickness of 4 mm. The surface shall be finished with PVDF base coating on the top side, and service coating on the reverse side with a polymer paint. The system shall be fixed to brick/stone/masonry/RCC walls or framed structure with necessary clamps, brackets and anchor fasteners, over and including base frame fabricated with aluminium square pipe of size 25 mm x 20 mm with 1 mm thickness, in 600 mm x 600 mm size grid, including stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant for groove filling, backer rods, etc., complete as per manufacturer's instructions, all as specified and directed by the Engineer-in-Charge.All clamps and brackets shall be hot-dip galvanised, minimum 80 micron thick, and conforming to IS 4759:1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating of minimum 20 microns.(The item includes the cost of aluminium frame, ACP panels, clamps, weather sealant, gasket, foam, fixtures, scaffolding, all machinery and any other fastening straps, nuts, bolts, rivets, washers, etc., and taking down of old ACP board, complete.)The manufacturer shall also give a guarantee/warranty for the ACP panels for a period of five years.Make of ACP: Alupex/Aludecor/Alstrong. |
| 17 | Point wiring complete with 1.5 sqmm single-core PVC insulated but unsheathed multistranded copper conductor FRLS cable, 650/1100 volts grade, drawn through and including non-metallic rigid PVC heavy-duty concealed conduit (minimum 20 mm dia external, but to be increased as per actual site requirement in accordance with Clause 19.125 of SSR Part I), ISI marked, with wall thickness not less than 1.8 mm, including conduit accessories like bends, tees, junction boxes, etc., fixed concealed/recessed in wall or ceiling etc., including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire, for modular wiring, for one light point/fan point controlled by one switch with cable 1.5 sqmm, all as specified and directed by the Engineer-in-Charge.Make of cable: Havells/Finolex/RR Kabel/KEI. |
| 18 | All as specified at Sl. No. 16, for one 3-pin socket outlet, 5 Amps, on the same board with other switches, with cable of size 1.5 sqmm nominal area. |
| 19 | All as specified at Sl. No. 16, for one 3-pin socket outlet, 5 Amps, on an independent board, with cable of size 1.5 sqmm nominal area. |
| 20 | Material and labour for point wiring complete with 2.5 sqmm single-core PVC insulated but unsheathed multistranded copper conductor FRLS cable, 1100 volts grade, drawn through and including PVC heavy-duty conduit (minimum 20 mm dia external, but to be increased as per actual site requirement in accordance with Clause 19.125 of SSR Part I), ISI marked, including conduit accessories like bends, tees, junction boxes, etc., fixed concealed/recessed in wall or ceiling etc., including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire, complete, all as specified and directed by the Engineer-in-Charge, for the following:(a) One 3/5-pin, 15/16 Amps socket.Make: Havells/Finolex/RR Kabel/KEI. |
| 21 | Supply and fixing of modular switch, one-way, 10 Amps, 1 module, complete, all as specified and directed by the Engineer-in-Charge.Make: Legrand/Schneider/Hager. |
| 22 | Supply and fixing of modular switch, one-way, 16 Amps, 1 module, complete, all as specified and directed by the Engineer-in-Charge.Make: Legrand/Schneider/Hager. |
| 23 | Supply and fixing of modular socket, 6 Amps, 2/3-pin combined, 2 module, complete, all as specified and directed by the Engineer-in-Charge.Make: Legrand/Schneider/Hager. |
| 24 | Supply and fixing of modular socket, 16 Amps, 2/3-pin combined, 2 module, complete, all as specified and directed by the Engineer-in-Charge.Make: Legrand/Schneider/Hager. |
| 25 | Supply and fixing of energy-efficient, recess-mounted LED panel fitting, 36 watt, suitable for 2 x 2 grid, in white colour, luminous efficacy not less than 120 lumens per watt, total luminous flux 4200 lumens, input voltage 220 to 240 V, power factor not less than 0.90, with high-quality diffuser for uniform light and high efficiency, made from CRCA sheet, pre-coated white colour, with separate replaceable electronic driver, colour temperature of 6500K, with proper electronic connections, as directed by the Engineer-in-Charge.Make: Philips/Wipro. |
| 26 | Supply and fixing of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, minimum air delivery 210 CFM, service value 6.00 (BEE five-star rated), with brushless direct current motor (BLDC). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
TodaySep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender