Tender For Provision Of Infrastructure For Installing Of Fast Charger For Electric Buses And Other Associated Works At Nt Pool & Provn Of Cable Tray At Annex Bldg, Himadri Bldg And Wnc (O) Mess.
Tender Value
43.03 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
2 days left
EMD
86076
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Infrastructure For Installing Of Fast Charger For Electric Buses And Other Associated Works At Nt Pool & Provn Of Cable Tray At Annex Bldg, Himadri Bldg And Wnc (O) Mess.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing of PVC DLP- On wall trunking with all finishing accessories(end, joint of lid, joint of body,interior angle, exterior angle, flat angle, derivation) confirming standard EN 50085-2-1.Trunking should accept Wiring device with all the functions by associating the accessory of installation.Trunking should confirm to the current specifications of NF C 68-104 in terms of both performance and level of functions provided by the system.Installation of trunking (which carries electrical wiring accessories) should be type 3 (installation) in the new standard. Material should be Non-flame propagating. Degrees of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2m. The trunking covers and partitions should be in PVC white RAL 9003 of Legrand or equivalemt and all as specified and directed.The accessories should be in plastic ABS white RAL. |
| 2 | PLASTIC TRUNKING 195MM X 50MM with 1 or 2 compartment (Suitable at site) with following accessories. Complete all as specified and directed by Engineer - in - Charge. |
| 3 | FLEXIBLE COVER 180MM WIDTH |
| 4 | BASE JOINT |
| 5 | JOINT FOR 180MM WIDTH COVER |
| 6 | SEPARATION PARTITIONS |
| 7 | INTERNAL ANGLES-ADJ FRM 80 DEG |
| 8 | EXTERNAL ANGLES-ADJ FRM 60 DEG |
| 9 | FLAT ANGLE FOR 195X50-DLP TRU |
| 10 | END CAPS |
| 11 | FLAT JUNCTIONS |
| 12 | Supply & fixing of PVC DLP - On wall trunking with all finishing accessories (end, joint of lid, joint of body,interior angle, exterior angle, flat angle, derivation) confirming standard EN 50085-2-1.Trunking should accept Wiring device with all the functions by associating the accessory of installation.Trunking should confirm to the current specifications of NF C 68-104 in terms of both performance and level of functions provided by the system. Installation trunking (which carries electrical wiring accessories) should be type 3 (installation)in the new standard.Material should be Non-flame propagating. Degrees of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2m. The trunking covers and partitions should be in PVC white RAL 9003 of Legrand or equivalemt and all as specified and directed.The accessories should be in plastic ABS white RAL. |
| 13 | PLASTIC TRUNKING 80MM X 50MM with 1 or 2 compartment (Suitable at site) with following accessories complete all as specified and directed by Engineer - in - Charge. |
| 14 | FLEXIBLE COVER 65MM WIDTH |
| 15 | BASE JOINT |
| 16 | JOINT FOR 65MM WIDTH COVER |
| 17 | INTERNAL ANGLES-ADJ FRM 80 DEG |
| 18 | EXTERNAL ANGLES-ADJ FRM 60 DEG |
| 19 | FLAT ANGLES |
| 20 | END CAP |
| 21 | FLAT JUNCTIONS |
| 22 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, any description including Nainital or similar pattern roof coverings or as in valley gutter complete all as specified and directed. |
| 23 | S&F Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 24 | S&F Plain galvanised mild steel sheeting 1.60mm thick in ridges hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and opening for rain water pipe to be provided fixed with MS Flat complete all as specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified. |
| 26 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to FE-410 Gde E-250 quality A, complete all as specified. |
| 27 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water , complete all as specified and directed. |
| 28 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 3 mm thick wall care putty all as specified and directed. |
| 29 | M&L for Washing, rubbing down and stopping of distempered and painted surfaces of old wall and apply two coat distemper oil emulsion over a coat of primer complete all as specified. |
| 30 | Providing and applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 31 | Providing and applying fair finish 20mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 32 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 33 | Material & Labour for ashing, rubbing down and stopping of distempered and painted surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. |
| 34 | S&F powder coated (50Micron minimum thickness) aluminium frame for door, windows, ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/ louvered window or ventilator without sash bar,aluminium including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified.Note : a) Glazing shall be measured seperately.b) Item shall be paid as per weight of aluminium section.c) The rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area. |
| 35 | Supply and fix 4.8 mm thick plain glass exc 0.5 Sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed. |
| 36 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to aluminium frame including removing old wiremesh, complete all as specified and directed. |
| 37 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame). |
| 38 | S&F 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified. |
| 39 | S&F 35mm thick factory made plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9 mm B.W.P commercial ply with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc all as specified and directed. |
| 40 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 41 | S&F Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed by Engg-in-Charge |
| 42 | S&F 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws complete all as specified and directed by Engg-in-Charge |
| 43 | M&L preparation of new wooden surface and apply two caots of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described, over a coat of pink primer, complete all as specified and directed. |
| 44 | Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed. |
| 45 | M&L for light shade coloured double charged Super Glossy vitrified tiles 9-10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 46 | M&L for Glazed ceramic tiles coloured of size 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified. |
| 47 | Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed. |
| 48 | Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edge GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture. design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO,50 to 0.75 as per IS 8225 1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ .120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge |
| 49 | M & L for Machine cut kota stone slab flooring 20-25mm thick and including 15mm thick cement screed base laid in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 50 | M&L preparation of new steel surface and applying two coats of synthetic enamel in any description, over 10 cm in width or girth, not otherwise described, over a coat of Red oxide, zinc chrome, specified and directed. |
| 51 | M&L for PCC.1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 52 | Taking up or down 15mm bore steel tubing and connections, complete all as specified. |
| 53 | S&F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings concealed on walls/ceiling or laying in floors including fixing of pipes in wall with clamps as mentioned and shown in HQ CE (N) MZ TD Drg No TD/2023/01 toTD/2023/03 complete all as specified.Note :- Marking to be done with permanent maker showing the concealed pipe line to avoid breakage/ damage in future. Drawing of internal pipe line (kitchen, Bath, Toilet etc) to be submitted by the contractor. |
| 54 | S&F as in repairs 15mm fancy type chromium plated Bib taps, Cat Part No. CQT-CHR-23037 of Jaquar or of equivalent in Parryware or Hindware as approved cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F as in repairs brass chromium plated shower rose 100mm dia including 160mm long shower arm casted body round shape for wall mounted shower Cat Part No.OHS-CHR-1989 and Cat Part No.SHA-CHR-477 respectively of Jaquar or of equivalent in Parryware or Hindware as approved, including fixed to 15mm bore pipe, complete all as specified and directed. |
| 56 | S&F wash basins, vitreous china, white,Thin Rim Table Top, of size 495mm x 395mm x 150mm and Swan Nech Pillar Tap with left hand operating Knob with 450mm long braided hose conforming to model Cat No. JDS-WHT-25909 and CQT-CHR-23123 respectively of JAQUAR or equivalent in Parryware, Hindware as approved with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste coupling and waste pipe of appropriate size and required length confirming to Cat Part No ALD-CHR-705 of JAQUAR or equivalent in Parryware, Hindware as approved , including painting of fittings and brackets, sealing gap between wall and wash basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and directed. |
| 57 | S & F in repairs stop valve /angle valve fancy type Cat Part No.CQT-CHR-23053 of Jaquar or of equivalent in Parryware or Hindware as approved chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed. |
| 58 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 59 | S&F 110 mm bore of PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed to wall or laid in floor, jointed with neat solvent including fixing of pipes in wall with clamps as mentioned and shown in HQ CE (N) MZ TD Drg No TD/2023/01 toTD/2023/03 complete all as specified. |
| 60 | S&F 110mm PVC (SWR) Bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel access door and jointed with neat solvent to PVC pipes fixed to wall or floor including all fittings complete all as specified and as directed. |
| 61 | M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade of with grey cement and pigments laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator complete all as specified and directed. |
| 62 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 63 | M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, including PVC bend, tee joints etc as per site requirement ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following : |
| 64 | One light point controlled by one switch SP one way. |
| 65 | One ceiling fan point controlled with one 5A switch |
| 66 | One exhaust fan point controlled with one 5A switch |
| 67 | One 3 pin socket outlet 5Amps on independant board. |
| 68 | One 3 pin socket outlet 5Amps on same board with other switches. |
| 69 | Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly. |
| 70 | S&F Modular Switch , 6Amp, One way, 1 module, ISI marked. |
| 71 | S&F Modular Switch , 16Amp, One way, 1 module, ISI marked |
| 72 | S&F Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked. |
| 73 | S&F Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked. |
| 74 | S&F Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked. |
| 75 | S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified. |
| 76 | S&F Modular white cover plate with Frame 3 Module, ISI marked. |
| 77 | S&F Modular white cover plate with Frame 6 Module, ISI marked. |
| 78 | S&F Modular metal flush box 3 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface. |
| 79 | S&F Modular metal flush box 6 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface. |
| 80 | Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 81 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete |
| 82 | Supply and fixing ceiling fans complete with blades, down rods with safety GI wire connecting up to fan hook, electronic regulator modular type and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with service value 5.0 BEE. Five star rated with brushles diret current motor 26 W, minimum rated speed 350 RPM, service value 8.6, starting voltage 120 V maximum and connecting up including provision of flexible 3 core copper cable complete all as specified and directed. |
| 83 | Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers |
| 84 | Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc. |
| 85 | S&F double door metallic sheet metal enclosure MCB DB SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed. |
| 86 | Supply and fixing MCB SPN 40 to 63 Amp, 240V, 10KA 'C' curve complete all as specified and directed. |
| 87 | Supply and fixing MCB SP 6 to 32 Amp, 240V, 10KA 'C' curve complete all as specified and directed. |
| 88 | Material & Labour for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.5 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32 x 6 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type D2 and PCC cover 1:2:4 type B1 watering arrangement with GI pipe funnel, jali, and cast iron cover fixed on top of pit complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion. |
| 89 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 16 sqmm 2 core. |
| 90 | M&L for High density poly-ethylene pipes (HDPE) of pressure 4 kgf/cm2 pipe, PE 63, 40 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 91 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core |
| 92 | M&L for road cutting upto 30 cm width and 45 cm depth and making good using Patchmate (Instant road repair material)/ PCC suitable for vehicle movement complete all as specified and directed. |
| 93 | M&L for High density poly-ethylene pipes (HDPE) of pressure 4 kgf/cm2 pipe, PE 63, 90 mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. |
| 94 | Supply, install, testing and commissioning of LT Panel CPRI Approved mounted on angle iron frame 40x40x5 mm grouted on floor,cubical outdoor type, with both side opening 415V, 3 phase, made of 3.15 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 1000 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections Panel and fixing/connecting in panel with provisions of thimble/lugs and necessary farmework and PCC foundation complete all as specified and directed with comprising of the following :-(a) MCCB 630 Amps, 52 KA, FP - 01 Nos (Incoming)(b) MCCB 630 Amps, 52 KA, FP - 02 Nos (Outgoing)(c) Control panel wiring with 2.5 sq mm multistranded, pvc insulated copper conductor cable between voltmeter, Am meter, and their selector switch complete with suitable CTs ratio, voltmeter flush pattern type 96 mm square dial -1 nos, Ameter digital CT operated 96 mm sqare dial flush pattern type, indication lamp for 3 phase and control fuses-3 Nos complete .(d) Aluminium bus bar 1000 Amps for phase & 600 Amps for neutral complete with bus bar insulator,nuts & bolts complete.(e) Power panel wiring between bus bar to MCCB of different capacity with PVC insulated multistranded copper cable , single core ,1100 volts grade of appropriate size complete with copper lugs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender