Tender For Provision Of Deficient Covered Car Parking For Officers Md Accn At construction Park Under Ge(Nd) Visakhapatnam
Tender Value
43.10 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
5 days left
EMD
86200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Deficient Covered Car Parking For Officers Md Accn At construction Park Under Ge(Nd) Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | BOQ Corrigendum | BOQ | 25-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I: B/R WORKS |
| 2 | Surface excavation n. exc 30cm deep & averaging 18cm deep & getting out in soft and loose soil. |
| 3 | Demolition of un-reinforced cement concrete below or above ground floor not exceeding 15 cm thickness. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and getting out in hard/dense soil. |
| 5 | Plain cement concrete type D2, 1:4:8 (40mm graded stone aggregate) in foundations, fillings and mass concrete. |
| 6 | Plain cement concrete type C2, 1:3:6 (40mm graded stone aggregate) in foundations, fillings and mass concrete. |
| 7 | M&L for hardcore of broken stone of guage n. exc 63 mm deposited,spread and levelled in layers n. Exc 15 cm thick, water and ramed to a true surface |
| 8 | M&L for 100 mm cement concrete Type B-1,1:2:4 (20mm graded aggregate) in flooring/hard standing & finished the surfaces even and smooth with using extra cement all as specified and directed. |
| 9 | M&L for for sand filling under floors, paving or in foundation including watering and consolidation complete all as specified and as directed. |
| 10 | M&L machine pressed precast concrete interlocking paver block of any shape and size confirming to ISI 15658-2006 of 60 mm thickness M-35 grade with grey cement & with pigment all as specified and directed. |
| 11 | M&L for PCC 1:2:4 Type B-1 using 20 mm graded stone aggregate as in coping all as specified and directed. |
| 12 | M&L for brick work with flyash bricks straight or curved on plan exc 6m mean radious built in cement mortar 1:6 all as specified and directed. |
| 13 | M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 14 | M&L for applying two coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plastered by auto roller surfaces incl preparation of surfaces. |
| 15 | S&F for 0.50 mm thick pre-painted corrugated/’Z’ profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation.T&P to reach the roof to fi the sheets to be arranged by the contractor and Complete all as specified and as directed. (Make : TATA BLUE SCOPE/ CRIL/METCO). |
| 16 | S&F for 0.50 mm thick pre-painted Plain steel galvalume sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55% aluminium and 45% zinc) pre-painted with primer coat of 5 micron and coated with Silicon modified polyester coating of 20 micron and alkalyed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activities to avoid any seepage of water through lateral overlap as per manufacturer’s instructions, including fixing with self drilling and self tapping screws 0.5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. The screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation.T&P to reach the roof to fi the sheets to be arranged by the contractor and Complete all as specified and as directed. (Make : TATA BLUE SCOPE/ CRIL/METCO). |
| 17 | S&F Steel work in tubular trusses, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication all as specified and directed by Engr in charge. |
| 18 | S&F Plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment Fe 410-W (Gde-E- 250) all as specified and directed. |
| 19 | S&F 16 to 20 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm but n exc 15cm long. |
| 20 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. |
| 21 | M&L for preparation of new or previously untreated steel surfaces of any discription over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified. |
| 22 | Removing excavated material exc. 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point in soil. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender