Tender For Comprehensive Maintenance And Periodical Services To Certain Bldg At Kashmir House Under Ge New Delhi
Tender Value
1.31 Crore
Estimated cost
Bid Submission
07 Oct 2026
7 days left
EMD
2.06 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Periodical Services To Certain Bldg At Kashmir House Under Ge New Delhi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Easing & adjusting of aluminium door including replacement of small article like rubber gaskets, aluminium beads screws etc complete all as specified and directed. |
| 2 | Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each complete all as specified and directed. |
| 3 | Taking down chowkhats or frame without taking off shutters exc 1.50 sqm but n.exc 4.0 sqm complete all as specified and directed. |
| 4 | S&F powder coated aluminum door using 96.6mmX44.8 mmX1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/ Harrison) 02 Nos tower bolt 150 mm , door handles, SS butt hinges 125 mm 04 Nos, hydraulic door closer and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width complete all as specified and directed.Make of glass: MODI/FLOAT/ATUL |
| 5 | S&F powder coated aluminum door using 96.6mmX44.8 mmX1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size (Make : Godrej/ Harrison) 02 Nos tower bolt 150 mm , door handles and fittings on floor spring complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width complete all as specified and directed.Make of glass: MODI/FLOAT/ATUL |
| 6 | S&F powder coated aluminium window using 63 mmX38 mmX1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter incl 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge. |
| 7 | S&F aluminium ornamantal grill 8mm dia 75x95mm aperture complete incl U channel complete all as specified and as directed. |
| 8 | S&F in repair prelaminated decorative PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasteners complete all as specified and directed. |
| 9 | Demolition of stone slabs and tiles of any description or thickness in floors, wall aprons etc laid bedded and pointed in any mortar incl mortar screed of any description including removal of debris from site complete all as specified and directed. |
| 10 | M&L for 20 mm thick granite (any type ) stone machine cut bedded and jointed with grey cement slurry and pointed with white cement with pigment to match incl cutting and polishing over 20 mm thick screed in CM 1:6 in floors complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed. |
| 12 | S&F glazed ceramic tiles in vertical surfaces 600x300x7mm/ 450X300X7 mm coloured tiles set and jointed in neat cement slurry or pointed in white or coloured to match over and incl 10 mm thick rendering in CM 1:3 complete all as specified and as directed. |
| 13 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in CM 1:6 as in floor complete all as specified and as directed. |
| 14 | M&L for vitrified ceramic tiles 7-8 mm thick (square /ractangular) polished light shade, area of each tiles n.exc 0.36 sqm over and incl 15mm thick CM 1:6 screed bed in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed. |
| 15 | Disconnecting existing tanks of capacity n.exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed |
| 16 | Disconnecting existing tanks of capacity n.exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed |
| 17 | Disconnecting existing tanks of capacity n.exc 2000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Note :- Cleaning repairing, etc. shall be measured separately) complete all as specified and directed |
| 18 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 500 Ltrs capacity of tanks complete all as specified and directed |
| 19 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 1000 Ltrs capacity of tanks complete all as specified and directed. |
| 20 | Cleaning and removing all scales and dirt etc from tanks and form mouths of circulating pipes etc for 2000 Ltrs capacity of tanks complete all as specified and directed. |
| 21 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings including dismantling old existing water tank of any capacity complete all as specified and directed. |
| 22 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings including dismantling old existing water tank of any capacity complete all as specified and directed. |
| 23 | S&F 2000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each) , fittings including dismantling old existing water tank of any capacity complete all as specified and directed. |
| 24 | M&L for up rooting of plants (girth n.exc 30cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs (including multistoried) and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. |
| 25 | S&F in repair aluminium handle of 125mm size cast type anodised (ISI marked) complete all as specified and as directed. |
| 26 | S&F in repair aluminium anodised tower bolts of extruded, 150 mm long complete all as specified and as directed. |
| 27 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia or wire and an average width aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed. |
| 28 | S&F 4 mm thick frosted sheet glass fixed with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness size ,quality or description from metal frame inluding punching or drilling out old glazing pins/spring clips and provided and fixing new one complete all as specified and directed. |
| 29 | S&F 5.5 mm thick sheet glass ordinary quality fixed with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness size ,quality or description from metal frame inluding punching or drilling out old glazing pins/spring clips and provided and fixing new one complete all as specified and directed. |
| 30 | S&F in repair 12 mm thick pre laminated particle board exterior grade, prelaminated with decorative lamination on both side in panels of aluminium doors or partitions with aluminium beads complete all as specified and as directed.Make : Kitply,Ecoboard, M/s Green Ply. |
| 31 | S&F in repair continuos piano hinges MS bright finish or electrogalvanised 30mm width of flap when open complete all as specified and as directed. |
| 32 | S&F in repair brass handles cast or extruded type 75mm complete all as specified and as directed. |
| 33 | S&F in repair MS mortice lock verticle type 100 mm 4 lever fixed in aluminium/ wooden doors complete all as specified and directed.Make : Harrison, Godrej |
| 34 | S&F in repair 65 mm 2 lever brass locks for cupboards grade I complete all as specified and directed.Make : Harrison , Godrej |
| 35 | S&F in repair 75 mm hasp & staple aluminium anodised safety type incl bolt to hinge plate fixed with screws complete all as specified and directed |
| 36 | S&F in repair 140 mm door stopper aluminum alloy body and tongue anodized with hard drawn steel spring complete all as specified and directed |
| 37 | S&F in repair CI door closer hydraulically regulated type designation NO 3 universal type suitable for door shutters 851 mm to 1000 mm complete all as specified and directed. Make : Hardwyan, M/s Prabhat |
| 38 | S&F in repair double action type floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass & other part of Mild steel heavy duty complete all as specified and directed.Make : Hardwyan, M/s Prabhat. |
| 39 | S &F in repair butt hinges 100mm size medium weight cold rolled mild steel complete all as specified and directed. |
| 40 | S &F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 41 | S &F in repair 250mm long aluminium alloy anodised sliding door bolt with hasp & stapple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 42 | S&F in repair powder coated MS curtain rods 20-25 mm dia with MS chromium plated bracket complete all as specified and directed. |
| 43 | S &F in repair 28mm dia stainless steel handle 450 to 600mm long as per sample kept in AGE KH Office fixed with nut and bolt to wooden/tuffened door complete all as specified and directed |
| 44 | S&F in repair 1000 to 1400 mm long and 20 mm wide aluminum door seal including 10 mm wide cotton fitted in door seals complete all as specified and directed. |
| 45 | S &F in repair looking mirror with plastic moulded frame of size (630 X 450)mm , 3mm thickness, complete all as specified and directed. |
| 46 | S &F in repair 600x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial ply or AC building board fitted to wooden plug with CP brass screws complete all as specified and directed. |
| 47 | Dismantling wall & ceiling boards and boarding of any description as in panelling ceiling, partition, cup boards etc incl cover fillets in any surfaces complete .including carefully taking down of electric fittings/fixtures from wall and ceiling complete all as specified and directed. |
| 48 | S&F PVC wall paneling frame made out of electric resistance welded mild steel square steel tube of size 25 mm x 25 mm x 16 SWG, size laid both walls not less than 600 mm C/C with two coat of synthetic enamel paint over a coat of red oxide zinc on frame shall be fixed to walls by means of wooden/plastic rawel plugs or gut ties PVC wall paneling shall be laminated plastic section SPUF-144 of size 250 mm x 6 mm with distance between the supporting ribs not exceeding 19 mm including necessary cutting for electrical fitting as per site requirement complete all as specified and directed. |
| 49 | S&F PVC false ceiling with frame made of electric resistance welded semi-bright steel tube of size 38mm x 38 x16 SWG. The grid size of ceiling frame shall not exc 600 x 600mm. The frame shall be painted with two coat of synthetic enemal paint over one coat of red oxide primer. The PVC ceiling shall be Hallow multi chambered section of size 250mm x 6mm jointed to another by male and female push fitting system and will be fixed to the frame with the help of steel screws including necessary cutting for electrical fitting complete all as specified and directed. |
| 50 | S&F in repairs Mineral fibre ceiling boards 12mm thick 600 X 600 mm size incl grid 25 X 25 X 1.6 mm thick GI powder coated angles 25 X 35 X 1.6 mm size ‘T’ section fixed with suspenders from ceiling etc (Armstrong RH Dune 99) complete all as specified and directed |
| 51 | S &F in repair plywood grade BWP type BB fixed with screwes to timber frame work 6 mm thick complete all as specified and directed. Make : Kitply,Ecoboard, M/s Green Ply. |
| 52 | S &F in repair 18mm thick MDF board pre laminated both side fixed with aluminium screws as in cub board shutter, cub board partition and side etc including all fittings fixtures and builder hardware where required etc complete all as specified and as directed. |
| 53 | S &F in repair block boards 18/19 mm thick Grade II quality interior grade with decorative face veneer on both faces fixed with screws incl 6mm thick teak wood lipping as in cub boards incl builders hardware fittings complete all as specified and directed.Make : Kitply,Ecoboard, M/s Green Ply. |
| 54 | S&F in repair Mineral fibre ceiling boards 12 mm thick 600 X 600 mm size (Armstrong RH Dune 99/ New Lotus 70) complete all as specified and directed. |
| 55 | S &F in repair 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets complete incl connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 56 | S&F in repair 32mm waste fittings brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 57 | S &F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 58 | S &F in repair waste coupling brass chromium plated for vitreous china, sink, WHB, urinals etc with long screwed shanked ad fly nuts 32 mm bore complete all as specified and directed |
| 59 | S &F in repair waste coupling brass chromium plated for vitreous china, sink, WHB, urinals etc with long screwed shankd ad fly nuts 40 mm bore complete all as specified and directed. |
| 60 | S &F in repair 32 mm bore brass chromium plated bottle traps for wash basins, sinks, urinals etc with inlet and outlet screwed for pipe or connection including necessary packing, union and cap complete all as specified and directed |
| 61 | S&F in repair CP bottle trap (with internal partition)32mm size with 250mm & 190mm long wall connection pipe and wall flange, fixed to waste coupling complete all as specified and directed.Make: JAGUAR CAT Part No ALD 769 or equivelent of make as specified in PS. |
| 62 | S&F in repair PVC connection 15 mm bore and 600 mm long with brass check nut and PVC/rubber waster at both ends complete all as specified and directed. |
| 63 | S &F in repair 10 ltr capacity vitreous china cistern, low level white, with brass inlet ball valve, float & CP handle complete for single syphonic action type complete all as specified and directed. Make: Jaguar/ Hindware/ Cera |
| 64 | S&F in repair vitreous china urinal half stall type, white (excluding flushing cistern flush pipe and waste pipe) including PVC waster pipe providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and uniion for discharge pipe (excluding of fixing supply pipe to flushing cistern trap and waste complete all as specified and directed |
| 65 | S&F in repair urinal vitreous china including waste coupling (excluding flushing cistern flush pipe and waste pipe) including PVC waste pipe providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws/nut bolts pointing around urinal back in cement and uniion for discharge pipe complete all as specified and directed and all acessaries complete all as specified and directed.Make: JAQUAR CAT PART No URSWHT-13253 or equivelent of make as specified in PS. |
| 66 | S&F in repairs snow white vitreous china EWC single peice type 760X350X660 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete all as specified and directed.Make : JAQUAR CAT Part No: SLSWHT-6851S220P/SLSWHT-6851S110P or Cera Cat Part No 51013210 or equivelent of make as specified in PS. |
| 67 | S&F in repair vitreous china wash down water closet (Pedestal pattern) white complete including provision of lime concrete bedding, and connecting to flushing cistern with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density of PVC 32mm dia for low level PVC cistern complete all as specified and directed. |
| 68 | S&F in repair 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall complete all as specified and directed. |
| 69 | S&F in repair 20mm bore of medium grade galvanised steel tubing with all fittings and fixed to wall or laid in floor complete all as specified and directed. |
| 70 | S&F in repair 25mm bore of medium grade galvanised steel tubing with all fittings and fixed to wall or laid in floor complete all as specified and directed |
| 71 | S&F in repair PVC tank covers suitable for tanks 500 & 1000 litres tanks including securing with mild steel binding wire complete all as specified and directed. |
| 72 | S&F in repair PVC tank covers suitable for tanks upto 2000 litres including securing with mild steel binding wire complete all as specified and directed |
| 73 | S&F in repair brass head, face and spindle for bib cock/pillar cock/stop 15 mm bore any type complete all as specified and directed. |
| 74 | S&F in repair internal fittings of PVC of vitreous china ware flushing cistern single syphonic action type 10 ltr capacity including flush handle, rod and ball cock etc complete all as specified and directed. |
| 75 | S&F in repair 15 mm bore chromium plated fancy type brass stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 76 | S&F in repair 15 mm bore chromium plated fancy type brass angular stop cock with wall flanged screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.Make: JAGUAR CAT Part No OPP-15053PM or equivelent of make as specified in PS. |
| 77 | S&F in repair 15 mm bore chromium plated fancy type bib taps with elegant knob screwed down high pressure complete all as specified and directed. |
| 78 | S&F in repair 15mm bore chromium plated bib cock with wall flange complete all as specified and directed.Make: Jaquar Cat Part No CON 037KN or equivelent of make as specified in PS. |
| 79 | S&F in repair 15mm bore chromium plated single lever wash hand basin piller cock quarter turn complete all as specified and directed.Make: Jaguar cat part No OPR-15001PM or equivelent of make as specified in PS. |
| 80 | S&F in repair 15 mm bore chromium plated self closing pillar tap for WHBs with complete acessasreis complete all as specified and directed.Make: JAGUAR cat part No PRS 031 or equivelent of make as specified in PS. |
| 81 | S&F in repair 15 mm bore fancy type piller taps cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without letter Hot or Cold with long screw, shanks fly nuts screwed for iron pipe complete all as specified and directed. |
| 82 | S &F in repair 600 mm long CP connection with CP brass nut & PVC/rubber washer suitable for 15 mm bore pipe/tap complete all as specified and directed. |
| 83 | S&F in repair 125 mm dia CP grating openable type with hinge as per sample over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and directed |
| 84 | S&F in repair brass chromium plated two way angle cock 15 mm complete all as specified and directed.Make: Cera Cat Part No F2014211 or euivalent in Jaguar/ Hindware |
| 85 | S&F in repair 15 mm bore chromium plated TWO way bib taps with knob to operate, complete all as specified and directed by Engr-in-Charge. Make : JAGUAR CAT Part No:VGP 81041 or equivelent of make as specified in PS. |
| 86 | S&F in repair flush cock (Push type)15mm for urinal vitreous china including waste coupling and all acessaries complete all as specified and directed.Make: Jaguar CAT PART-PRS 073 of Jaquar or equivelent of make as specified in PS. |
| 87 | S&F in repair CP toilet paper holder with lid, fixed to wall with CP brass screws complete all as specified and directed.Make: Jaguar Cat Part No CAN-CHR-1151N or equivalent in Cera/ Hindware |
| 88 | S&F in repair CP soap dish fixed to wall with brass screw complete all as specified and directed.Make: Cera Cat Part No F5013106CH or equivalent in Jaguar/ Hindware |
| 89 | S&F in repair brass CP towel ring square with round flange (Make:-JAGUAR CAT Part No:AKP 35721P of equivalent of make as specified in PS.) fixed with and incl CP brass screws and wooden /plastic cleats complete all as specified and directed. |
| 90 | S&F in repair brass chromium plated tubular towel rails 20 mm dia D type ,60 cm long between flanges complete all as specified and directed.Make: Cera/ Johnson/ Jaguar/ Hindware |
| 91 | S&F in repair urinal partition slabs or dividing plate size 310 X 700 mm vitreous china ware terminating about 40 cm above floor level line and fixed top wall with stainless steel screw & PVC rawl plug and making good the distrubed surface by white cement to match complete all as specified and directed. |
| 92 | S&F in repair brass hat and coat hooks solid body 175mm to 250mm complete all as specified and directed. |
| 93 | S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and directed. |
| 94 | S&F in repair small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed. |
| 95 | S&F in repair CI bracket for WHB or kitchen Sink etc including cutting, necessary fitments for planning in brackets complete all as specified and directed. |
| 96 | S&F in repair ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 97 | S &F in repair ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 98 | S&F in repair valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 99 | S&F in repair vitreous china bowl urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe (exculding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing, around urinal brack in cement, fixing automatic flushing vistern with brackets flush pipe, grating and union for discharge pipe complete all as specified and directed.Make: Cera Cat Part No 54020116 or equivalent in Jaguar/ Hindware |
| 100 | S&F in repair vitreous china water closet quatting pan 'Orrissa' pattern size 580 X 440 mm white integral foot rests including provision of cement concrete bedding, connnection to flush pipe and making good the disturbed portion of floor to match with the existing surface complete all as specified and directed. |
| 101 | S&F in repair wash hand basin vitreous china white, flat back of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand (bracket includes) and making good the surface/joints with white cement complete all as specified and directed. |
| 102 | S&F in repair wash hand basin vitreous china white, counter basin of size 540X480 mm including making good the surface/joints with white cement complete all as specified and directed.Make: CERA CAT Part No: 1009 or equivalent of make as specified in PS. |
| 103 | S&F in repair 17/18 mm thick HDHMR, or High-Density High Moisture Resistance board pre laminated both side fixed with tapping & aluminium screws as in cub board shutter, cub board partition and side etc including all fittings fixtures and builder hardware where required etc complete all as specified and directed.Make : Kitply,Ecoboard, M/s Green Ply. |
| 104 | Demolition brick work or stone /boulder masonry of built in CM incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stoneworkd and precast concrete articles complete all as specified and directed. |
| 105 | M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 106 | M&L for brick work using except bricks (old retrived bricks from demolition shall be used) straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 old size bricks complete all as specified and directed. |
| 107 | M&L for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 108 | M&L for Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 109 | Taking down cement plaster on brick /concrete wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed. |
| 110 | Dismantling wrought or mild steel work or cast iron work of any description not otherwise provide for complete all as specified and directed. |
| 111 | M&L for MS gusssets plates (plane or chequerred) channel channel square cut or notched (ordinary or counter sunk) forming holes, with out attachment grade Fe -410 W (Gde E-250 Quality A) complete all as specified and directed. |
| 112 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, incluuding Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 114 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 115 | S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing including necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed. |
| 116 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming grade St.-240 complete all as specified and directed. |
| 117 | M&L for preparation of new or previously untreated steel surfaces over 10 cm in width or girth not otherwise described and applying tow coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed. |
| 118 | S&F in repair CI soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors, fixed to walls 100mm complete all as specified and directed. |
| 119 | S&F in repair CI soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors, fixed to walls 75mm complete all as specified and directed. |
| 120 | S&F in repair CI bends (any radius diminishing or tapers) larger bore measured 100 mm complete all as specified and directed. |
| 121 | S&F in repair CI bends (any radius diminishing or tapers) larger bore measured 75 mm complete all as specified and directed. |
| 122 | S&F in repairs stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed. |
| 123 | S&F in repair cast iron in cowls 100 mm complete all as specified and directed. |
| 124 | S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring complete all as specified and directed. |
| 125 | S&F in repair PVC (SWR) bends any radius 110 mm complete all as specified and directed. |
| 126 | M&L for cleaning, flushing of chocked and de-silting of outdoor sewage lines n.exc 300mm internal diameter of any depth upto three meter . The cleaning shall be carried out with mechanized operation by means of diesel/electric operatedvehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super succer machine of required capacity and sent to storage tanksfor further disposal to the authorised disposal sites. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strict supervision complete all as specified and directed.Note:-(a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine.(b) Manual cleaning operation/scavenging is prohibited.(c) The unit rate quoted by the contractor shall interalia deem to include the cost of proviiding skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc |
| 127 | Desluding of existing manholes of depth upto 2.0 m Vol of manhole exc 0.20 cum but n.exc 2.88 cum for liquid,solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 Ltr and suction tank capacity of 300 Ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading, digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud etc into the pit and spreying bleaching powder over the entire surface complete all as specified and directed.Note :-(a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine.(b) The cleaning shall be carried out with mechanized operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites.(c) Manual cleaning operation/scavenging is prohibited.(d) The unit rate shall deem to include for all material, labour (skilled/unskilled), tools and plants andrequisite quantity of water for the entire operation and transportation arrangements. |
| 128 | Cleaning of manhole and removing the blockage sludge from manhole by manually with the help of bampos/rods/pipes incluidng rodding and flushing the water and dispose off the sludge out side of MoD land complete all as directed at site for any size, description of manhole up to 1.5 m internal depth complete all as specified and directed. |
| 129 | Cleaning of sewer line and removing the blockage by manually with the help of bampoos/rods/pipes including rodding and flushing the water and dispose off tge sludge out side the MoD land upto 200 mm dia pipes complete all as specified and directed. |
| 130 | Cleaning of gully traps by removing the sludge greasing materials etc outside MoD land under contractor own arrangement complete all as specified and directed by Engineer-in-Charge. |
| 131 | Cleaning to blockage of floor traps, WC and Wash hand basin complaints received from the users complete all as specified and directed. |
| 132 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for fdn of manhole/ shafts or sewer line etc n.exc 10 sqm on plan etc and getting out in any type of soil complete all as specified and directed. |
| 133 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor & removing demolished material out side defence land, Bore of pipe 150 mm complete all as specified and directed. |
| 134 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor & removing demolished material out side defence land, Bore of pipe 200 mm complete all as specified and directed. |
| 135 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortor & removing demolished material out side defence land, Bore of pipe 300 mm complete all as specified and directed. |
| 136 | M&L for SGSW drain pipes Gde A laid in trenches and jointed as specified in CM 1:1 incl testing complete 150 mm bore complete all as specified and directed. |
| 137 | All as per item No 136.00 above but 200 mm complete all as specified and directed. |
| 138 | Demolition of cement concrete(unreinforced) in ground floor and pavings n.ecx 15 cm in thickness below or above ground level complete all as specified and directed. |
| 139 | M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregated) as in bed including packing under & haunching against side of SGSW drain pipe 150mm bore after they are laid & tested complete all as specified and directed. |
| 140 | All as per item No 139.00 above but 200mm bore complete all as specified and directed. |
| 141 | M&L for precast concrete drain cover slab 1:2:4 type B-1 using 20 mm graded stone agg and set in CM 1:4 complete all as specified and directed. |
| 142 | M&L for reinforced concrete pipe class NP2 laid and jointed complete with collars laid in trenches of internal dia 300mm jointed in cement mortar and tested complete all as specified and directed. |
| 143 | Returning , filling incl spreading leveling watering and wall ramming layers not exc 25 cm soft soil complete all as specified and directed. |
| 144 | Removal of excavated materials exc 1.5 km but not exc 5 km and disposing off out side MoD land complete all as specified and directed. |
| 145 | Demolition of RCC (reinforced , cut as required to facilitate demolition) of any description and in any position not otherwise specifically provide for as in manhole cover complete all as specified and directed. |
| 146 | S&F precast RCC 1:2:4 manhole covers slabs any size , thickness with 3 mm thick FI around cover slab complete all as specified Make PPRC, Polycrete incl reinforcement as per manufacturers design with frame complete all as specified and directed. |
| 147 | M&L for TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 148 | M&L for wooden flooring, laminated wooden type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193 mm size 8mm thick, commercial grade, abrasion resistance of AC-II category, over and including 6 micron polyethylene and foam cushion sheeting over the concrete surface to minimize moisture migration from the concrete including all fixing material i.e. chemical adhesive, base strip/fillets etc. veneered and matching top beading etc including taking down old existing flooring any type complete all as specified and directed. |
| 149 | S&F in repair 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and directed.Note : MS steel work will be measured and paid seprately. Make Rajshree/Echon or equivalent as approved by GE |
| 150 | S&F in repair 50 micron solar control film sticked to glass panes as per manufacturer instruction reflective type complete all as specified and directed. |
| 151 | M&L in repair for best quality vinyl wall paper on wall applying with necessary adhesive including matching corners and angles complete all as specified and directed. |
| 152 | S&F welded steel wire fabric n.exc 4 Kg per Sqm complete to steel member complete all as specified and directed. |
| 153 | S&F in repair 4mm thick aluminium composite panel sheet with PVDF coating of any choice colour fixed with self taping screw/bolt in any height upto two storey building including necessary double steel scaffolding where required complete all as specified and as directed incl necessary double steel scaffolding where required upto two storey bldg complete all as specified and directed.Make: Aludecor ACP/ Viva ACP or equivalent as approved by GE |
| 154 | S&F 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour complete all as specified and directed. |
| 155 | M&L for PU Coated cement concrete Paver tiles of size 300x300x25mm set in 15mm thick screed in Cement Mortar (1:6) including filling joints with white or colour cement complete all as specified and directed. |
| 156 | M&L for 10 to 12 mm thick heavy duty coloured digital vitrified parking tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed.Make: Cera/ Somany/ Orientbell |
| 157 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 158 | M&L for 75mm thick Cement concrete type D- 2 1:4:8 (40mm graded aggregate) as in floor/ sub base or in like complete all as specified and directed. |
| 159 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 160 | M&L for Sand filling under floors tiles including watering and consolidation complete all as specified and directed. |
| 161 | S&F prelaminated PVC rigid foam sheet wall panelling of 5 mm thick stuck on inner frame work of 35 mm wide strips of 5 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300 mm C/C. The PVC strips to be fixed to the all using 65 mm long MS screws through the groove in the strip by using PVC fasters including necessary moulding work on doors, windows, pillers and opening etc complete all as specified and directed.Note:- (a) Work for fixing of wall panelling shall be got executed through manufacturers authorised applicators only under the close supervision of their technical staff. (b) The entire qty of wall panelling and their allied ancillaries shall be procured directly from the manufacturer or their authorised dealer only. |
| 162 | M&L for providing and fixing False ceiling at any height with semi perforated 12mm thick mircro tegular edge GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, (with 50mm thick glass wool) as per IS 8225 :1987, Noncombustile as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondry intermediate cross T of size 15x32m of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod up to 1000nn length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partion with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wass SS screws. The work shall be carried out as per specificatons, drawing and as per direction of Engineer-in-Charge complete all as specified and directed. |
| 163 | M&L for GI powder coated micro preforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete with GI powder coated grid consisting of T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc complete all as per specification complete all as specified and directed. |
| 164 | M&L for 15 mm thick ready mix plaster (internal) on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engineer in Charge. |
| 165 | M&L for 15 mm thick ready mix plaster (External) on brick or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engineer in Charge. |
| 166 | M&L for 5mm thick Ready mix plaster on concrete surfaces on ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge. |
| 167 | S&F in repair overhead storage of size (600 x 500 x 900) mm (Make: Methodex or equivalent as approved by GE) having swing openable shutters shall be made up of metal with 50-60 micron powder coated complete all as specified and directed. |
| 168 | M&L for preparation of newly plastered surface of wall and applying two coat of weather proof exterior emulsion extra premium 100% acrylic emulsion as approved over a coat of primer complete all as specified and directed. |
| 169 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge |
| 170 | M&L for preparation of new plastered surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 171 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 172 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 173 | S&F powder coated aluminium partition using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (Make: GLASS Make MODI/ FLOAT/ ATUL). |
| 174 | S&F 100 mm wide Venetian blinds vertical type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed. |
| 175 | S&F ZEBRA venetian blinds horizontal type incl guide rail, pulling thread etc incl taking down existing pelmets complete all as specified and directed. |
| 176 | M&L for red stone on dholpur stone louvers & jallies 25 to 30 mm thick incl all moulding rounding ornamental work complete all as specified and directed by Engr-in-Charge |
| 177 | M&L for 900X100X100 mm ornamental red stone dholpur stone incl all moundling, weathering, throating & rounding set and joineted in CM 1:4 complete all as specified and directed by Engr-in-Charge |
| 178 | M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400micron thickness having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days.lt should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003 complete all as specified and directed.Note :- Repairs of existing roof where required for said treatment shall also inclusive under unit rate. The work shall be got done through manufacturers authorised applicators only under the close supervision of their technical staff.Make: Ms STP Limited/ Ms IWL India Limited/ Ms Asian Paints Ltd/ Ms Fosroc Chemicals Please Enable Macros to View BoQ information |
| 179 | M&L for Treatment of roof with reinforced elastomeric liquid waterproofing membrane of 400micron thickness having SRI of 130, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371, respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat yp!e 1200C as per IS: 101 (P-7/Sec-3) 1990 having VOC less than as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 3.5 bars of pressure for 7-days.lt should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25—40-micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P-8/Sec-6) 1993 and also should pass Impact test as per IS: 101 (P5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing Scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self-cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc., with pressure washer after repairing the existing roof having old bitumen membrane by filling cracks, potholes, holes with waterproofing compound having compressive strength as per IS-4031 part-6-1988 & permeability of water as per IS2645-2003 complete all as specified and directed.Note :- Repairs of existing roof where required for said treatment shall also inclusive under unit rate. The work shall be got done through manufacturers authorised applicators only under the close supervision of their technical staff.Make: Ms STP Limited/ Ms IWL India Limited/ Ms Asian Paints Ltd/ Ms Fosroc Chemicals Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Oct 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender