Tender For Special Repairs And Maintenance Of Minicoy (South) Lighthouse Station At Minicoy In The Ut Of Lakshadweep.
Tender Value
1.17 Crore
Estimated cost
Bid Submission
22 Sep 2026
8 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs And Maintenance Of Minicoy (South) Lighthouse Station At Minicoy In The Ut Of Lakshadweep.
BOQ
| Sl. No. | Item Description |
| 1 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including all labours,tools & plants, loading, transporting, unloadinge etc. to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. including supply of all labours , tools & plants etc.complete as per direction of the Engineer-in-Charge |
| 3 | Earth work in excavation for all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 4 | Providing and laying in position cement concrete of 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - all work up to plinth level . including supply of all materials, labours , tools & plants, etc.complete. |
| 5 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - all work up to plinth level . including supply of all materials, labours , tools & plants, etc.complete. |
| 6 | Providing and fixing G.I. chain link fabric fencing Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shadeof required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in charge. including supply of all materials, labours,tools & plants, etc. |
| 7 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. including cost of all labour, tools & plants,scaffolding etc complete as directed. |
| 8 | Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. |
| 9 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including cost of all labour, tools & plants etc complete as directed. |
| 10 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres including cost of all labour, tools & plants,supports to slab/lintel,scaffolding etc complete as directed. |
| 11 | Demolishing nominal cement concrete 1:4:8 or leaner mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 12 | Repair works to cracks in plastering / masonary / R.C.C. works: Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.For sealing cracks and faulty construction joints, routed out/ making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat.including supply of all materials, labours ,scaffolding tools & plantsetc. complete. |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labour, tools & plants,scaffolding etc complete as directed. |
| 14 | Repairs to plaster of thickness 12 mm to 20 mm With cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, including cost of all labour, tools & plants,scaffolding etc complete as directed. |
| 15 | Centering and shuttering including strutting, propping etc. including cost of all materials, labour,scaffolding, tools & plants etc complete as directed. : Suspended floors, roofs, landings, balconies and access platform |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 17 | Weather shade, Chajjas, corbels etc., including edges |
| 18 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).including cost of all materials, labour,scaffolding, tools & plants etc complete as directed. |
| 19 | Steel reinforcement for RCC work bend tied and placed in position with tested steel reinforcement bars conforming to relavent ISI specifications inluding supply of all binding wire, cutting, bending, binding etc supply of all materials labour, tools and plants,scaffolding etc complete as directed -Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 20 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)including cost of all materials, labour,scaffolding, tools & plants etc complete as directed. |
| 21 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour,scaffolding, tools & plants etc complete as directed. |
| 22 | 12mm thick cement plaster of mix 1:4(1 cement, 4course sand) including cost of all materials, labour,scaffolding, tools & plants etc complete as directed.. Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 23 | Applying priming coats with cement primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including cost of all labour,scaffolding, tools & plants etc complete as directed. |
| 24 | Providing and fixing glass panes of windows with 4mm thick plain glass after removing the broken glass from wood frame and fixing with wooden reaper and nails including cost of all materials, labour, tools & plants,scaffolding etc complete as directed. |
| 25 | Providing and fixing glass panes of windows with 8 mm thick plain glass after removing the broken glass from wood frame and fixing with wooden reaper and nails including cost of all materials, labour, tools & plants ,scaffolding etc complete as directed. |
| 26 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm with 2nd class teak wood beading 62x19 mm ,after removing the old nylon net including cost of all materials ,labour ,tools and plants , brass screws etc. complete as directed . |
| 27 | Rewedging and cramping of doors,windows and ventilator for easy opening and closing including plaining the side of the shutters taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames,including replacement of hinges with screws, etc. as required as per the direction of the Engineer-in-charge including cost of all materials, labour, tools & plants,scaffolding etc., complete . |
| 28 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including cost of all materials, labour, tools & plants. |
| 29 | Dismantling W.C. Pan (Inidan/Europian)of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge,including cost of all labours, tools & plants etc. complete as directed. |
| 30 | Dismantling of unserviceable/damaged Wash Basin of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including supply of all labours, tools and plants, finishing etc. complete as directed by the engineer in charge. |
| 31 | Repairs to furniture of staff quarters including replacing unserviceable members cost of all materials, labour charges and tools & plants etc. complete as directed . : Replacing damaged plywood of cots with 4 mm thick marine plywood of approved brand after cutting, removing the damaged one, cutting to size and fixing new plywood with panel pins all as directed, including supply of all materials, labour, tools & plants etc. complete. |
| 32 | Repairs to wooden Meat safeincluding cutting, removing and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 33 | Repairs to wooden chair including cutting, removing and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 34 | Repairs to wooden Dining table table including cutting, removing and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 35 | Repairs to wooden centre table / Teapoy including cutting, removing and replacing damaged members with new one with superior hard wood etc. including fabricating, fixing in position as directed including supply of all materials, labour, tools & plants etc. complete |
| 36 | Replacing broken fittings of doors, windows with new fittings of approved quality after removing carefully the damaged ones from position, including supply of all materials, labour, tools & plants etc. complete. Providing and fixing 100 mm brass Handle with necessary screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 37 | Providing and fixing 125 mm brass Handle with necessary screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 38 | Providing and fixing bright finished 300 mm brass hard drawn Aldrop with necessary screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 39 | Providing and fixing bright finished 150x10 mm brass Tower bolt with necessary brass screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 40 | Providing and fixing bright finished 100 x10 mm brass Tower bolt with necessary brass screws including cost of all materials, labour, tools & plants etc complete as directed . |
| 41 | Providing and fixing bright finished 200 mm brass hooks and eyes with necessary screws etc including cost of all materials, labour, tools & plants etc complete as directed . |
| 42 | Providing and fixing following fixtures of approved make and as directed including supply of all materials, labour, tools & plants, etc. complete. Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. including cost of all materials, labour, tools & plants etc complete as directed . |
| 43 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour- 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. including cost of all materials, labour, tools & plants etc complete as directed. |
| 44 | Providing and fixing 100 mm C.P. brass shower rose with 15 or 20 mm inlet including cost of all materials, labour, tools & plants. |
| 45 | Providing and fixing 15mm C.P brass long body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed. |
| 46 | Providing and fixing 15mm C.P brass short body bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including cost of all materials, labour, tools & plants etc complete as directed. |
| 47 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, including cost of all materials, labour, tools & plants etc complete as directed. |
| 48 | Providing and fixing 15 mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 etc complete as directed including cost of all materials, labour, tools & plants etc complete as directed. |
| 49 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore, including cost of all materials, labour, tools & plants etc complete as directed. |
| 50 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore, including cost of all materials, labour, tools & plants etc complete as directed. |
| 51 | Providing and fixing 15mm health faucet chromium of approved quality including cost of all materials, labour, tools & plants etc complete as directed. |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 50mm nominal dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 55 | Providing and fixing G.I. pipes 32mm nominal dia complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.including cost of all materials, labour, tools & plants etc complete as directed. |
| 56 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 57 | Providing and fixing wash basin size (550x 400 mm)(Cera / Parryware/ Hindware) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require,removing the damage washbasin etc complete as directed including cost of all materials, labour, tools & plants. |
| 58 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with white seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including cost of all materials, labour, tools & plants. |
| 59 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required - Kitchen sink without drain board 610x510 mm bowl depth 200 mm including cost of all materials, labour, tools & plants. |
| 60 | Polishing with polyurethane(PU) on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt , dust and sand papered smooth and including a coat of wood filler etc including cost of all materials, labour, tools & plants complete as directed. Wooden Cot |
| 61 | Wooden Dining table |
| 62 | Wooden Dining chair |
| 63 | Wooden Meat safe |
| 64 | Wooden Office Table |
| 65 | Wooden Office chair |
| 66 | Dismantiling tile work in floors and wall laid in cement mortar including stacking material within 50 meters lead for thickness of tile 10mm to 25mm .including cost of all labour, tools & plants etc complete as directed. |
| 67 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622,of approved make ,in all colours and shades,laid on 20mm thick cement mortar 1:4(1cement :4coarse sand ),jointing with grey cement slurry @3.3kg/sqm including grouting the joints with white cement and matching pigments etc.complete. |
| 68 | Wall painting (two coat) with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed. |
| 69 | Wall painting two coats with acrylic emulsion paint,exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including cost of all materials, labours, tools & plants,scaffolding etc. complete as directed |
| 70 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 71 | Varnishing two coats with touchwood paint (Asian / Berger) of approved quality to the wooden doors, windows, Ventilators& wood based surfaces etc of theTower after, cleaning all dirt, dust, sand papering, including cost of all materials, labour, tools, scaffolding etc. complete. |
| 72 | Replacing the damaged sign boards of the Office & Staff quarters building with board made out of acrelic sheet / foam of size 450x200mm over which matter written on vinyl sheet of superior quality matters to be written in English & Hindi, boards to be fixed in the walls of the buildings with necessary screws. Supply of all materials, labour and tools& plants etc., complete. |
| 73 | Cleaning of open well of LH compound including bailing out water, removal of all debrises / mud etc, disposal of the debris with in a lead of 50m, cleaning of the well with fresh water etc complete, including cost of all materials, labour, tools & plants etc complete as directed. |
| 74 | Cleaning of septic tanks including cleaning the sewrage line , inspection chambers and replacing the C.C. covers over the tank after repairs if any and sealing the tanks with with cement mortar,removing earth etc complete as directed including cost of all materials, labour, tools & plants. |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including supply of all materials, labour, tools & plants etc complete as directed. |
| 76 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) etc complete as directed after removing old damage frame from wall including cost of all materials, labour, tools & plants,scaffolding etc. complete as directed. |
| 77 | Providing and fixing 35mm thick Second class teak woodpanelled or panelled and glazed shutters for doors,windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, including cost of all materials, labour, tools & plants,scaffolding etc. complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately) |
| 78 | Providing and fixing Second class teak wood panelling or panelling and glazing in panelled orpanelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves orrebates to be measured). Panelling for panelled or panelled and glazedshutters 25 mm to 40 mm thick including cost of all materials, labour, tools & plants,scaffolding etc. complete as directed. |
| 79 | Providing and fixing 30 mm thick louvered shutters with fixed venetians 15mm thick and 80mm wide for windows ofLighthouse Tower, including Brass butt hingesof required size with necessary screws ,tower bolt ,stopper etc complete as directed including cost of all materials, labour, tools & plants. |
| 80 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification including cost of all materials, labour, tools & plants etc. complete as directed. |
| 81 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.- 30 mm thick plain PVC door shutters |
| 82 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. including supply of all materials, labour, tools & plants,scaffolding etc. complete |
| 83 | Providing and fixing tiled false ceiling of GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main\\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanise butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge ncluding supply of all labour, tools & plants,scaffolding etc. complete as directed . |
| 84 | Providing and fixing specified wood frame work consisting of battens 50x25mm Kiln seasoned and chemically treated hollock wood fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated hollock wood including supply of all materials, labours , tools & plants, scaffolding etc. complete. |
| 85 | Providing and fixing in wall lining with 12 mm thick medium density fibre board IS:14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. ncluding supply of all materials, labours , tools & plants, scaffolding etc. complete. |
| 86 | Providing and fixing wooden moulded corner beading of triangular shape 50x50 mm 2nd class teak wood to the junction of panelling etc. with iron screws, plugs and priming coaton unexposed surface etc. including supply of all materials, labours , tools & plants, scaffolding etc. complete. |
| 87 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge including supply of all materials, labours , tools & plants, scaffolding etc. complete. |
| 88 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture including supply of all materials, labours , tools & plants etc. complete. |
| 89 | Providing and fixing of heavy duty G.I. pipes hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.including supply of all materials, labours , tools & plants,scaffolding etc. complete. |
| 90 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.including supply of all materials, labours , tools & plants etc. complete. |
| 91 | Hacking of CC flooring including cleaning for surface etc. including supply of all materials, labours , tools & plants etc.complete as per direction of the Engineer-in-Charge |
| 92 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 93 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine upto and including 12 mm dia and minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. |
| 94 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 95 | Fabrication, casting and erection of Custom made hand railing vertical posts of LH top balcony as per the approved design with superior quality cast iron mineral including making the mould as per the design, casting of posts, finishing etc, transportation & supply of materials at site, fixing of the posts in position as directed in line and level, fixing of horizontal pipes, etc complete as directed including cost of all materials, labour, tools & plants, transportation, scaffolding etc complete as directed. |
| 96 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.- On steel work including cost of all materials, labour, tools & plants, scaffolding etc complete as directed. |
| 97 | Recovery of scrape value for old dismantled / removed fitting / items. 100mm Butt hinges |
| 98 | 75 mm Butt hinges |
| 99 | 75 mm Brass handle |
| 100 | 100 mm Brass handle |
| 101 | 300 mmBrass Aldrop |
| 102 | 150 mmBrass tower bolt |
| 103 | 200mm Brass tower bolt |
| 104 | 200 mm brass hooks & Eyes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender