Tender For General-Govt. Medical College, Kozhikode Stp-Imch-Providing 250 Mm Flowmeter And Sluice Valve For Newly Installed 60Hp Motor Pump Set Of Stp At Imch Attached To The Govt. Medical College, Kozhikode-General Electrical Work
Tender Value
2.54 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
4 days left
EMD
6353
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Govt. Medical College, Kozhikode Stp-Imch-Providing 250 Mm Flowmeter And Sluice Valve For Newly Installed 60Hp Motor Pump Set Of Stp At Imch Attached To The Govt. Medical College, Kozhikode-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work |
| 2 | OD58588/2026-2027:Supplying, installing, testing and commissioning of 250 mm dia CI body Electromagnetic Flow Meter double flanged type, suitable for measurement of potable/raw water/sewage water in a fully filled pipeline, including mounting accessories, mating flanges, gaskets, nuts and bolts, earthing arrangement, interconnecting signal cable between sensor and transmitter, testing, commissioning and all incidental works required for satisfactory operation as directed by the Engineer-in-Charge. |
| 3 | OD58594/2026-2027:Supplying, installing, testing and commissioning of 250 mm dia Cast Iron Sluice Valve (Resilient Seated/Wedge Type), conforming to IS 14846 and relevant BIS specifications, suitable for water supply applications, with cast iron body, bonnet and cover, stainless steel rod with wheel , suitable for a working pressure of PN 1.6 MPa, including all accessories such as nuts, bolts, rubber insertion gaskets, jointing materials, erection in position, alignment, testing for leakage under operating pressure, painting with approved anticorrosive coating wherever required, and all labour, tools, tackles and incidental charges complete as directed by the Engineer-in-Charge. |
| 4 | OD58615/2026-2027:Supplying and fixing 250 mm dia Ductile Iron (DI) Flange Socket Tail Piece conforming to IS 9523 and relevant BIS specifications, suitable for connecting DI socket-ended pipes to flanged valves, fittings or equipment, manufactured from ductile iron of grade GGG-400/500 or equivalent, with PN 16 pressure rating, including rubber gasket, high tensile nuts and bolts, jointing materials, cutting, fitting, alignment, lowering, fixing in position, testing and all labour, tools, tackles, transportation and incidental charges complete as directed by the Engineer-in-Charge. |
| 5 | OD58634/2026-2027:Supplying, lowering, laying, fitting and jointing Ductile Iron (DI) 90° Bend conforming to IS 9523 and relevant BIS specifications, suitable for DI pipeline systems, of approved make and diameter as specified, with pressure rating PN 10, manufactured from ductile iron grade conforming to relevant standards, complete with cement mortar lining/fusion bonded epoxy lining and external coating as per specifications, including rubber gaskets, jointing materials, excavation of joint pits wherever required, fitting, alignment, testing and commissioning, and all labour, tools, tackles, transportation and incidental charges complete as directed by the Engineer-in-Charge. |
| 6 | OD58681/2026-2027:Cutting the existing 250 mm dia Ductile Iron (DI) pipeline at the required location, dismantling and removing the necessary pipe portion, carrying out modifications for insertion of valves, flow meters, fittings or other pipeline accessories, including cutting, re-fixing and alignment of the pipeline, providing and fixing all necessary flanges, nuts, bolts, rubber gaskets and jointing materials, testing for leakage under working pressure, complete as directed by the Engineer-in-Charge. |
| 7 | OD58715/2026-2027:Dismantling the existing 20 HP electric motor disconnecting electrical connections, coupling arrangements, foundation bolts and accessories, carefully shifting within the site as required, re-erecting the motor in the designated location, alignment with pump/driven equipment, refixing on the existing/new foundation, reconnecting power and control cables, tightening all electrical and mechanical connections, testing, trial run and commissioning complete, including all labour, tools, tackles, consumables and incidental charges required for satisfactory operation, as directed by the Engineer-in-Charge. |
| 8 | OD58779/2026-2027:Supply and fixing of terminal connector suitable for 16 Sq mm cable with mounting support. |
| 9 | OD58800/2026-2027:Dismantling cement concrete of any grade removal of reinforcement if encountered, disposal of unserviceable materials and debris within a lead of 50 m, dressing of the dismantled surface and all complete as directed by the Engineer-in-Charge. |
| 10 | OD58804/2026-2027:Refilling available excavated trench with soft soil in layers ramming and consolidating each layer properly to achieve the required compaction, including dressing and levelling the surface, disposal of surplus excavated material if any within the specified lead, as directed by the Engineer-in-Charge. |
| 11 | OD59270/2026-2027:Supply and installing 12 mm Steel wire rope for suspending 60HP submersible motor in well and tie with nearest structure with suitable size U clam |
| 12 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 13 | OD74557/2026-2027:Supply and Installation of dust and vermin proof 3 Phase Syntax Meter Board (GSJB-5345) 54cm X 45cm and to fix KSEB LSB, FLOW METER etc as required including fixing it on wall making good the damages color washing as required |
| 14 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels |
| 15 | OD76751/2026-2027:Servicing and programming of existing soft starter controlling 60 HP motor, including inspection of equipment, cleaning of internal components, checking and tightening of all power and control connections, verification of operating parameters, programming and resetting of soft starter settings such as starting current limit, acceleration time, deceleration time, motor protection settings and other operational parameters as required, conducting trial operation and ensuring satisfactory performance of the motor and soft starter system as directed by the Engineer-in-Charge. The rate shall include all labour, tools, testing instruments, consumables and incidental charges required for the completion of the work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender