Tender For Restoration Of Data Centre By Way Of Relocation Of From Ground Floor To First Floor On Foa At Main C Us, Chatha.(Group No. 2)
Tender Value
29.15 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
0 days left
EMD
58300
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Data Centre By Way Of Relocation Of From Ground Floor To First Floor On Foa At Main C Us, Chatha.(Group No. 2)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Sep-2026 | Tender Extension Notice | Date | 09-Sep-2026 |
| 2 | 09-Sep-2026 | Corrigendum Tender Extension | Date | 16-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 2 | For fixed portion |
| 3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 4 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 5 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 6 | Providing and fixing ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 8 | With float glass panes of 5.00 mm thickness |
| 9 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 10 | 200x10 mm |
| 11 | Providing and fixing aluminium handles ISI marked (powder coated) with necessary screws etc. complete : |
| 12 | 300 mm |
| 13 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. (Godrej) |
| 14 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : |
| 15 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Providing and fixing 4.0 mm thick Fibre Cement False Ceiling (tiles of size 595x595 mm) conforming to IS 14862:2000, Type B Category 3, fixed on metal grid system comprising of hot-dipped galvanized interlocking metal T-section main runners, cross tees and wall angles, suspended from ceiling with dash fasteners, hangers, GI wire etc., complete as per manufacturer’s specifications and direction of Engineer-in-Charge. |
| 18 | Dismantling tile and stone work in floors and walls laid in cement mortar including stacking material within 50 meters lead. |
| 19 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 20 | Granite of any colour and shade |
| 21 | Area of slab over 0.50 sqm. |
| 22 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 23 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 24 | Distempering with 1st quality Acrylic/oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 25 | Old work (one or more coats) . |
| 26 | Providing and fixing following PVC pipes alongwith necessary assesories and fitting (such as tee, elbow, bends etc )complete items |
| 27 | PVC pipe (150 mm nominal dia) |
| 28 | Providing and fixing modular cupboard-cum-computer table of height 915 mm (3 ft), and depth 600 mm made of 18 mm thick pre-laminated particle board conforming to IS 12823, with machine-applied 2 mm thick PVC edge banding on all visible edges, comprising table top, vertical side panels, modesty panel, shutter/drawer front panels, and under-table drawer bodies. The supporting framework shall consist of powder-coated 25x25 mm mild steel square tubes, fabricated for legs, rails, and lateral bracing, finished in two coats of approved synthetic enamel paint over primer coat. The drawers and shutters shall be fitted with stainless steel hinges, telescopic runners, handles, and locks. The overall assembly shall be installed as per approved drawings, specifications, and instructions of Engineer-in-Charge, complete with all hardware, labour, adhesives, polishing, and finishing. Payment shall be made per running metre of finished length, inclusive of all materials, fabrication, and installation. |
| 29 | CASSETTE Type four-way flow Air-Conditioning |
| 30 | Units |
| 31 | Supply, installation, testing & commissioning of round-flow type cassette units with built-in drain pump with decorative panel (nominal capacity) |
| 32 | 1.5 TR cooling only |
| 33 | Refrigerant Piping |
| 34 | Interconnecting refrigent pipe work with (19 mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported. |
| 35 | 12.7 mm pipe with 13 mm insulation |
| 36 | 6.4 mm pipe with 13 mm insulation |
| 37 | Drain Piping |
| 38 | Providing and fixing rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation. |
| 39 | 25/32 mm dia |
| 40 | Control & Transmission Wiring |
| 41 | Supply, installation, testing and commissioning of control cum transmission wiring of 4 core × 1.25 sq.mm copper wire in suitable PVC conduits between indoor & outdoor units |
| 42 | M.S. Stand for Outdoor Units |
| 43 | Powder coated M.S. stands prefabricated floor mounted type for placing outdoor units at rooftop area |
| 44 | Supply, installation, testing and commissioning of 63 kVA, Automatic Servo Voltage Stabilizer oil cooled, outdoor type suitable for operation on 3 phase 50 HZ, 415 V system with input voltage correction range of 260 V to 460 V, output 415 V +/-1%, unbalanced input, unbalanced load, first filling of oil, overvoltage, undervoltage, overcurrent, short circuit, protections and complete with by pass system. |
| 45 | Supply and laying of PVC Power Cable 1.1 KV Grade armoured aluminium XLPE cables including earth work, cost of end termination, thimbles and saddles etc. as reqd. |
| 46 | 35 sq.mm × 3.5 core |
| 47 | 50 sq.mm × 3.5 core |
| 48 | Supply and fixing of cable tray 300 mm x 100 mm |
| 49 | Wiring for light / fan / exhaust fan / call bell point with 1.5 Sq mm FR PVC insulated copper conductor cable in surface / recessed ISI marked PVC conduit including modular type switch, suitable size M.S. box and earthing the point with 1.5 sq mm FRLS pvc insulated copper conductor single core cable etc as requried |
| 50 | Supplying and fixing suitable GI box with modular plate and cover in front on surface or in recess, including P/F 6 pin 5/6 and 151/6 amp modular socket outlet and 15/16 amp modular switch , connection testing etc as requried |
| 51 | Supplying and fixing suitable GI box with modular plate and cover in front on surface or in recess, including P/F 3 pin 5/6 A modular socket outlet and 5/6 amp modular switch , connection testing etc as requried |
| 52 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as reqd (but without MCB/RCCB/isolator) |
| 53 | Providing and fixing 5 amps to 32 amps rating rating, 240/415 V, 10 KA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc as reqd. |
| 54 | Single Pole |
| 55 | TPN 63 Ampere |
| 56 | Earthing with GI earth plate 600mm x 600 mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (with charcoal or coke and salt) complete as required for earthing and lightning protection. |
| 57 | Providing and fixing 25 mm x 5mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/termination with G.I. nut, bolt, spring, washer etc. as reqd (Jointing shall be done by overlapping and with 2 sets of G.I. nut, bolt and spring washer spaced at 50 mm) |
| 58 | Wiring for circuit/sub main wiring alongwith earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as reqd. |
| 59 | 2x2.5 sq mm with 1x2.5 sqmm earth wire |
| 60 | 2x4 sqmm + 1x4 sqmm earth wire |
| 61 | 4x10 sqmm + 2x6 sqmm earth wire |
| 62 | Supply and fixing of 18 Watt LED surface light fixture including dismantling of existing complete with all accessories including connection testing etc as reqd. |
| 63 | Supply and fixing of 400 mm wall fan complete with all accessories including connection testing etc as reqd. |
| 64 | Supply, installation, testing at works, installation and commissioning of following distribution boards totally enclosed compartmentalized, cubicle indoor type fabricated with 16 SWG sheet steel, with Aluminium bus bars (both for main and neutral bus bars), complete with following switchgear/ mountings cable terminations, inter-connections as required, for 415 volts, 3 phase, 4 wire 50 HZ AC supply as per specifications and drawings. |
| 65 | Moulded case circuit Breakers shall be thermal magnetic trip type. Fault level for all MCCB and bus bar shall be 35 KA. ICU shall be equal to ICS=100% |
| 66 | Note : |
| 67 | All metering current transformers shall be Class 1, 15 VA. |
| 68 | MDB-1 (outdoor Type) |
| 69 | Incomer |
| 70 | 125 A 4P MCCB – 1No. |
| 71 | R,Y,B phase indicating lights with control fuses - 1 set |
| 72 | Bus Bar |
| 73 | 125 A 415V, 50Hz, 3ph, 4 wire Aluminium Bus bar |
| 74 | Outgoing |
| 75 | 40 Amp TPN - 2 No. |
| 76 | 63 Amp TPN - 2 No. |
| 77 | 40 Amp SPN - 10 No. |
| 78 | 63 Amp SPN - 2 No. |
| 79 | Incomer (AC panel) |
| 80 | 125 A 4P MCCB – 1No. Microprocessor type |
| 81 | R,Y,B phase indicating lights with control fuses - 1 set |
| 82 | Bus Bar |
| 83 | 125 A 415V, 50Hz, 3ph, 4 wire Aluminium Bus bar |
| 84 | Outgoing |
| 85 | 40 Amp SPN -4 No. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodaySep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender