Tender For Provn Of 01 X Toilet For Divyang Pers In The Area Of Office Complex Bldg No P-154 Of Ge (N) Ambala Cantt
Tender Value
4.87 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
13 days left
EMD
9740
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 01 X Toilet For Divyang Pers In The Area Of Office Complex Bldg No P-154 Of Ge (N) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30cm deep and averaging 15 cm deep, getting out in soft/loose soil, complete all as specified and as directed by the Engineer–in–Charge. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Material and Labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | Material and Labour brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Removing surplus excavated material to a distance not exceeding 50m and depositing where directed, complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finishing the surface even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Material and labour for rendering 15 mm thick on fair faces of brick work or concrete walls surfaces of internal in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | Material and labour broken stone hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Material and labour 75 mm thick PCC (1:4:8), Type D–2, using 40mm graded crushed stone aggregate as in sub base of floor etc and finished even and fair without using extra cement complete, all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour 100 mm thick PCC (1:4:8), Type D–2, using 40mm graded crushed stone aggregate as in sub base of floor etc and finished even and fair without using extra cement complete, all as specified and as directed by Engr-in-charge. |
| 13 | Material and Labour providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Material and Labour Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Material and labour glazed ceramic coloured tiles joint free 1st quality in vertical surfaces/ skirtings/dados of size 300 x 450 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4), complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection etc. and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | Material and labour for preparation of new plastered/unplastered surfaces and applying two coats of white lime wash on surfaces of walls, chajjas, roof projection, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. |
| 19 | Supply & fixing joint less made of single extruded WPC (Wood Polymer Composite) solid decorative type moulded flush door shutter of size 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and as directed. |
| 20 | Supply and fixing powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung), ventilators and partion including providing and fixing pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket/aluminium snap beading required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws , complete, all as specified and as directed.Note : (a). Glazing shall be measured and paid separately.(b). Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.(c). The rates quoted shall be inclusive of neoprene beading, aluminium beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed. |
| 21 | Material and labour for sheet glass 3.00mm thick , ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Supply and fixing 250mm long aluminium alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter, complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | Supply and fixing 150 mm long aluminium handle cast type anodised, complete all as specified and as directed by the Engineer-in-Charge. |
| 24 | Supply and fixing stainless steel butt hinges 100 mm long medium weight and fixed complete, all as specified and as directed by the Engineer-in-Charge. |
| 25 | Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Supply and fixing Vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 600 mm long 32mm bore HDPE waste down pipe, and 32 mm CP waste coupling including CI brackets, complete all as specified and as directed by the Engineer-in-Charge.Note:- Cost of PVC connection and waste pipe are included in this item. |
| 27 | Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, ISI marked, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | Material and labour 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete, all as specified and as directed by the Engineer-in-Charge. |
| 30 | Supply and fixing GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete, all as specified and as directed by the Engineer-in-Charge |
| 31 | Supply and fixing GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete, all as specified and as directed by the Engineer-in-Charge |
| 32 | Supply and fixing 15 mm stop valves/ angle cock ,but fancy type, chromium plated , cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and as directed by the Engineer-in-Charge |
| 33 | Supply and fixing 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe, complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | Supply and fixing water storage tank, 500 litre capacity, HDPE triple layer, white colour, with closed top, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm bore high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | Supply and fixing ball valves, high pressure of PTMT of 20 mm dia with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Min weight 15 mm dia 142 gms), complete, all as specified and as directed by the Engineer-in-Charge |
| 36 | Supply and fixing bib taps 15mm bore fancy type, brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including water closet pvc seat cover white closed pattern with flat bottom and cover, with Chromium Plated hinging device, Chromium Plated Jet Spray, PVC Trap including making connections and fixed in position , complete, all as specified and as directed. |
| 38 | Supply and fixing 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connection, complete, all as specified and as directed. |
| 39 | Supply and fixing of 600mmx450mm bevelled edge mirror 6mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Supply and fixing 110mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete all as specified and as directed by the Engineer-in-Charge |
| 41 | Supply and fixing 75mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall, complete all as specified and as directed by the Engineer-in-Charge |
| 42 | Supply and fixing 75 mm bore PVC (SWR) plain bends of any radius, complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Supply and fixing 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | Supply and fixing 110 mm bore PVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed by Engineer-in-charge. |
| 45 | Supply and fixing 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access doors, complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick,having Zinc coating 150 gm per sqm (Az-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Supply and fixing rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe-410-W (Grade E-250) quality ‘A’ complete all as specified and as directed by the Engineer-in-Charge |
| 48 | Supply and fixing vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe. complete, all as specified and as directed. |
| 49 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed . |
| 50 | Material and labour for 10mm thick heavy duty vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , complete all as specified and as directed by the Engineer-in-Charge. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’ |
| 51 | Supply and fixing GI Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint complete for all heights as per specifications including 0.50 mm thick GI metal ceiling board decorative finish fixed to frame work with holding down clips in false ceiling complete all as specified and as directed |
| 52 | Supply & fixing 12 mm thick costomized and moulded toughened glass with etching as in partition, door, fixed with patch fittings of stainless steel grade 304 or any suitable fittings of stainless steel grade 304 as required (fixing of glass should be top to bottom and any cutting required shall be done with diamond blade) including drilling holes for patch fittings and spider fittings as required and locking arrangement complete all as specified and directed by Engr–in –charge |
| 53 | Material and labour for 18 to 20mm thick Granite stone of black shade work (table rubbed, polished & moulding), as in floors, door jambs and like bedded with and including 15 mm thick screed bed in cement morter (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, complete all as specified and directed. |
| 54 | Supply & fixing for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 55 | Supply & fixing 450 mm long and 32 mm dia stainless steel handle decorative type finish for toughened glass door complete all as specified and as directed. |
| 56 | Material and labour for 1.50 mm thick aluminium composite panal (ACP) sheet decorative type finish, colour and pattern as approved complete all as specified and as directed |
| 57 | Material and labour for stainless steel 680mm long grab bar for toilet, complete all as specified and as directed by Engineer-in-charge. |
| 58 | Material and labour for stainless steel vertical swing grab bar for toilet, complete all as specified and as directed by Engineer-in-charge. |
| 59 | Material and labour vibratory rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658-2006, ISI marked of 60 mm thickness, grade M-35 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick, complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | Material and labour for providing precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Material and labour for plain cement concrete 1:3:6, type C-2 (using 40mm graded mechanically crushed stone aggregate), as in surface channels and drains complete all as specified and as directed . |
| 62 | Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, mould, mitred/ stopped end etc complete all as specified and as directed by the Engineer-in-Charge. |
| 63 | Material and labour for concrete bed in plain cement concrete 1:3:6 type C-2, (using 40 mm graded crushed stone aggregate), to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm dia pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Supply and fixing for 150mm dia Salt-glazed stoneware drain pipes, grade 'A' laid in trenches and jointed in cement mortar (1:1), complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Material and labour for mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to TMT bars complete all as specified and as directed |
| 66 | Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 110 mm dia, complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed by Engineer-in-Charge. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 68 | Description all as per serial item No. 67 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Description all as per serial item No. 67 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Description all as per srl item No 67 here-in-before but for one socket outlet 16 Amp with 4.00 sq mm PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4.00 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copper wire as earth continuity conductor connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.Note : (i) Point wiring shall be done in a manner that not more than 01 socket point executed in one circuit.(ii) Each socket point will be measured and paid as per point. |
| 71 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixing of modular socket outlet multipin combined, 6 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing of modular socket outlet multipin combined, (6pin), 6/16 Amp, one way, two module, 230 volts, complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body, complete all as specified and as directed by the Engineer-in-Charge. |
| 76 | Supply and fixing PVC White Freshner Exhaust Fan 250mm sweep, 1400 RPM, Aerodynamically designed blanced blades, Rust proof body, Low power consumption, 5 blades complete with Louvers easy to mount, complete all as specified and as directed by Engineer-in-charge. SKU Code 70049 of make Bajaj or equivalent in make given in Appx 'B'. |
| 77 | Supply and fixing LED batten fitting 20 watt, 4 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Supply and fixing LED light fitting, mirror type with high output diffuser 2 feet, 10 watt, 220V AC, decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by the Engineer-in-Charge. |
| 79 | Supply and fixing MCB SP, 6-32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB , complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | Supply and laying sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 81 | Note:- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit Page No…………………. of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender