Tender For Special Repairs To Building No. P-499 At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Sep 2026
18 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No. P-499 At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 3 | S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary S&F suitable MS hinges ,lugs, lock strike plate, hold fast complete all as specified and directed. |
| 4 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed . |
| 5 | M&L for PCC 1:2:4 type B-0 using (12.5 mm graded agggregate stone ) for back filling of Pressed steel frame etc complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,filling etc complete all as specified and directed. |
| 7 | S&F 35 mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed . |
| 8 | S&F Aluminium eyes pice glass for main Gate and shutter complete all as specified and as directed . |
| 9 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed. |
| 10 | S&F in repair Stainless steel Door hinges medium weight, cold rolled 100 mm size all as specified and directed. |
| 11 | S&F Aluminium anodised barrel tower bolt of extruded section length of bolt in 200 mm size complete all as specified and directed. |
| 12 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 13 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 14 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 15 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 16 | S&F standard aluminium section powder coated any colour as approved for window and ventilator three track sliding shutter /fixed type without sash bar ,aluminium section weight 0.55 kg /m including necessary joining cleats ,glazing clips ,rubber packing ,anodised aluminium snap beading , screws etc complete all as specified and as directed. |
| 17 | Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 18 | Supply and Fixing Figured glass pin head type (Figured glass) sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 19 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 20 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 21 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 22 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed. |
| 23 | S&F in aluminium, anodised barrel tower bolts 150mm long of extruded section and fixed complete all as specified and directed. |
| 24 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 25 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed . |
| 26 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 27 | M&L for 15 mm thick cement plaster on fair faces of stone masonry surface on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 28 | M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed. |
| 29 | M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 30 | Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 1 mm) complete all as specified and directed. |
| 31 | Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm) complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 33 | M&L for preparation of old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and directed. |
| 34 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified & directed. |
| 35 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 36 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 37 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed. |
| 38 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 39 | M & L, non skid White ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 40 | M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.05 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 41 | Providing cement concrete 25 mm thick type B-1 (1:2:4) using 20 mm graded agg as in sub base to flooring complete all as specified and as directed . |
| 42 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 43 | M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in floor, plinth protection etc finisheed even and smooth without using extra cement complete. |
| 44 | Dismantling stone slab and tiles of any description or thickness in floors,aprons etc.complete all as specified and directed. |
| 45 | M&L for machine cut kota stone slab in flooring18-20 mm thick and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and finshed polishing in complete all as specified. |
| 46 | M&L for Pre polished machine cut kota stone slab, 18-20 mm thick in riser and tread single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and finshed polishing complete all as specified and directed. |
| 47 | M&L for 20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete. |
| 48 | M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 49 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set ,jointed and with grey cement and no pigment ,pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 50 | Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store complete all as specified and as directed . |
| 51 | Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 52 | S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed . |
| 53 | S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed . |
| 54 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed . |
| 55 | S&F in repairs viterous China wash down water closet EWC including to connection to drain and flush pipe (excluding flushing cistern and flushing pipe) incl trap set complete all as specified and as directed . |
| 56 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed. |
| 57 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed . |
| 58 | S&F C P Hand shower (health faucet) 1.25 mtr PVC tube with wall hook complete for EWC, all as specified and directed. |
| 59 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed . |
| 60 | S&F in repair white glazed earthen ware vitreous china wash hand basin of size 550x400 mm with and including CI brackets ,32mm bore bras CP waste coupling lintel /out let PVC flexible pipe 600mm size for 15mm with brass nut and washers etc complete. |
| 61 | Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 63 | S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed. |
| 64 | S&F 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed. |
| 65 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 66 | S & F Aluminium Hat pegs of 6 pegs,solid body 125mm to 175 mm complete all as specified and as directed . |
| 67 | S & F Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 68 | S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 69 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 70 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 71 | S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed. |
| 72 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 73 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 74 | S &F PVC (SWR) 75 mm dia vent cowl complete all as specified and as directed . |
| 75 | S &F PVC (SWR) 110 mm dia vent cowl complete all as specified and as directed . |
| 76 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 15mm x 460mm bowl size 410mm x 330mm x160m complete all as specified and as directed |
| 77 | S&F, in repairs, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed. |
| 78 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed. |
| 79 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 80 | M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed. |
| 81 | S&F in repair 18/19 mm thick prelaminated particle board interior grade ,prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work in cup boards ,rebated or flat ege complete all as specified and directed. |
| 82 | M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed. |
| 83 | S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed. |
| 84 | Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed . |
| 85 | S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised. |
| 86 | Taking up or down steel tubing 15 mm bore and connection and removing to store complete all as specified and directed. |
| 87 | Taking up or down steel tubing 20 mm bore and connection and removing to store complete all as specified and directed. |
| 88 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed |
| 89 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed. |
| 90 | S&F in repairs kitchen plate rack of stainless steel S 304 of size 1200mm x 950mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed. |
| 91 | Demolition of RCC (reinforced , cut as required to facilitate demolition) of any description and in any position not otherwise specifically provide for as in manhole cover complete all as specified and as directed . |
| 92 | M&L for providing precast cement concrete type C1, 1:2:4 (20mm graded aggregate) in landings, cover slabs(for manholes etc) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and as directed . |
| 93 | M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement. |
| 94 | Removal of existing roof treatment incl under layers of cement screed any thickness incl tiles and taking down debries from roof to ground by machanical means to avoid any damange to structure and sorrounding and dispose off the debries at a distance of 500 mtr where directed. |
| 95 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed . |
| 96 | M&L for Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application after cleaning the surface completely to eliminate all sharp portion over 10 mm thick screed bed in CM (1:4) mixed with WPC @ 3% of weight of cement or as per manufacturers instructions, including removing old APP membrane, and applying a coat of aluminium paint complete all as specified. |
| 97 | Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and as directed . |
| 98 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.Note :- (New reinforcement or Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok |
| 99 | Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete along with fittings such as switches, ceiling roses, bell, regulators sockets etc, and removing from site and making good distribut surfaces of walls, floors etc all as directed. |
| 100 | Taking down existing unserviceable MCB DB/TPN/SPN/SP along with MCBs complete by disconnecting all as directed. |
| 101 | Taking down existing unserviceable T/light fitting & box type fitting. |
| 102 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information |
| 103 | Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender