Tender For Addition Alteration To Annexes Of P-1 And P-3 Hangar At Af Stn Gwalior
Tender Value
2.51 Crore
Estimated cost
Bid Submission
06 Oct 2026
10 days left
EMD
3.26 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Annexes Of P-1 And P-3 Hangar At Af Stn Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE A PART I (BUILDING WORKS) |
| 2 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part I . |
| 3 | SCHEDULE A PART II (INTERNAL WATER SUPPLY) |
| 4 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part II. |
| 5 | SCHEDULE A PART III (INTERNAL ELECTRIFICATION) |
| 6 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part III. |
| 7 | SCHEDULE A PART IV (EXTERNAL ELECTRIFICATION) |
| 8 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part IV. |
| 9 | SCHEDULE A PART V (PARKING SHED) |
| 10 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part V. |
| 11 | SCHEDULE A PART VI (SEWAGE DISPOSAL) |
| 12 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VI. |
| 13 | SCHEDULE A PART VII (GATE WITH RCC PILLAR) |
| 14 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VII. |
| 15 | SCHEDULE A PART VIII (ADDN/ALTN TO BLDG NO. P-1 & P-3) |
| 16 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part VIII. |
| 17 | SCHEDULE A PART IX (SITE CLEARANCE AND DEVELOPMENT) |
| 18 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part IX. |
| 19 | SCHEDULE A PART X (EXCAVATION AND EARTHWORK) |
| 20 | Lump sum price worked out by the contractor for Building works as listed in Sch ‘A’ Part X. |
| 21 | Sch A Part XI (Miscellaneous Items of B/R and E/M) |
| 22 | S&F vitreous china wash down water closet Single piece -WC (SLS-WHT-6851S300UF) complete all as specified and directed. |
| 23 | S&F in repairs hand shower (Health Faucet) 1 meter, with Easy flex tube in chrome inifh and wall hook complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S&F vitreous china urinal (URS-WHT-13263) complete all as specified and directed. |
| 25 | S&F in repairs vitreous China Wall Hung Basin (CNS-WHT-813) complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F in repairs Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers,Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F in repairs towel rail, 20mm dia, including suitable bracket complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F in repairs toilet paper holder with flap fixed to walls with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge. (AHS-CHR-1553) Make: Jaquar. |
| 29 | S&F in repairs soap dispencer automatic chrome/black complete all as specified and as directed by Engineer-in-Charge. (SDR-BLC-DJ0160AS) Make: Jaquar. |
| 30 | S&F in repairs 15 mm dia bore bib taps fancy type, complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F in repairs 15 mm dia bore angular stop cock with flange complete all as specified and as directed. |
| 32 | S&F in repairs soap dish recessed type complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge |
| 34 | S&F UPVC luxury casement sound proof door frame with single shutter and glazing 65mm/C65PS3/Z-SASH, DG INS, TGH (6T+12+6T)mm with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete weight not less than 31 Kg/Sqm all as directed. |
| 35 | S&F UPVC luxury casement sound proof window with frame with double shutter and glazing 65mm/C65PS3/Z-SASH, DG INS, TGH (6T+12+6T)mm with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc complete weight not less than 32 Kg/Sqm all as directed. |
| 36 | M&L for 100 users RCC septic tank conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 design mix in walls, base slab, baffle walls and roofslab including beams etc with vent shaft, manhole openings with cover connection etccomplete with effective depth of 1.5 m and overall depth of 3m complete all as specified and directed. |
| 37 | M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete incl intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0M diax4.5M deep complete all as specified and directed. |
| 38 | M&L for taking down carefully the connected LT cables and relaying the same at the directed location for XLPE UG cable 4 core 16/25 Sqmm, complete all as specified and as directedNote: 1. The cost of necessary LT cable joints will be measured and paid separately. 2. Additional cable required, if any, shall be measured and paid separately |
| 39 | All as per Srl item No.11.17 But for XLPE UG cable 3.5 core 50 Sqmm |
| 40 | All as per Srl item No. 11.17 But for XLPE UG cable 3.5 core 70 Sqmm |
| 41 | All as per Srl item No. 11.17 But for XLPE UG cable 3.5 core 120 Sqmm |
| 42 | All as per Srl item No. 11.17 But for XLPE UG cable 3.5 core 185 Sqmm |
| 43 | M&L in repair Cable jointing kit for 1.1 KV cable for straight-through heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 16 sqmm complete all as specified and directed. |
| 44 | M&L in repair Cable jointing kit for 1.1 KV cable for straight-through heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 sqmm complete all as specified and directed. |
| 45 | M&L in repair Cable jointing kit for 1.1 KV cable for straight-through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 95 sqmm complete all as specified and directed. |
| 46 | M&L in repair Cable jointing kit for 1.1 KV cable for straight-through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and directed. |
| 47 | Supply, Installed, Testing and Commissioning CPRI approved cubical type LT Panel floor mounted out door type for 415V, 3 phase 4 wire system 50 Hz AC supply with Copper bus bar duly colour coded, for neutral supported with DMC/SMC insulators colour coded with heat shrinkable sleeve having short circuit current with stand minimum 21 KA for one second complete connection from bus bar to breakers with suitable copper cable , factory made fabricated with CRCA sheet totally enclosed, dust weather and vermin proof for outer shell 3.15 mm thick and 2 mm thick for inner shell having TPN copper bus bar rating 1.5 times that of controlling MCCB supported on SMC insulator with short circuit withstand capacity 35 KVA for 1 second, bottom base channel MS section not less than 100mm x 50mm x 5 mm thick, entire panel shall have a common copper earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size of copper wiring with minimum 1.5 Sqmm PVC insulated copper conductor cable , cable alleys, cable gland plates in two half , general construction confirming to IS-8623/93 and mounted on suitable PCC foundation for the complete panel base with follwoing detailed specification & control complete with suitable fixing accessories. |
| 48 | The panel board shall be fabricated from a reputed CPRI-approved firm and shall be suitable to accommodate the following: complete all as specified and directed:-OUTER SHELL:- The outer shell shall be made of 3.15 mm thick CRCA body & MS angle section 50x50x6 mm frame with front & back openable, single door system lockable/ openable by keys from both sides, having flush pattern fancy locks with louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate providing the entry of an armoured cable of adequate size with glands. The dimension of the outer shell should be adequate to accommodate the inner shell described below, fitting a 50 mm space all around and shall be fabricated in such a way that the complete inner shell, along with its control gears and accessories, should be taken outside without disturbing the outer shell. The outer shell shall be mounted on a zinc metal-coated stand. Provision of threaded earthing studs at the bottom and lifting lugs of suitable size at the top to lift the feeder pillar box safely shall be made. Computer-cut self-adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be providid. The degree of protection of outer shell shall be IP-54. |
| 49 | INNER SHELL :- Inner shell made of 2.0 mm thick CRCA body compartmentalized for each control gear, front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks (2 Nos in each compartment) having louvers and air vents gasket for natural flow of air \\"U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incomer/outgoing MCCB's and TPN copper bus bar and extension links of rating not less than the 1.5 times rated capacity of the respective MCCB's. The TPN bus bar and extension links shall be insulated with colour-coated heat shrinkable sleeve and shall be mounted on a suitable size 'F' class throughout the length of the TPN bus bar. Computer-cut self-adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be provided on bus bar chamber. All control wires shall be with not less than 1.5 Sqmm multistranded copper conductor and shall be properly bunched. tied, ferruled for proper identification and crimped with adequate size of lugs. The cubicle shall have a bottom channel of size 75x50mm, duly coated with zinc metal coating. A detachable predrilled gland plate of thickness 3.15 mm, zinc metal coated should be used at the bottom, indicating lamps LED type, 230 Volt, AC at the inlet of the unit to show three-phase availability at the inlet. An inspection lamp with an 11-watt CFL shall be fitted on the top side of inner shell. The degree of protection for the inner shell shall be IP-42 and carry the following controls. :- SCHEDULE ‘A’ PART- IBUILDING WORKS Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 50 | INNER SHELL :- Inner shell made of 2.0 mm thick CRCA body compartmentalized for each control gear, front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks (2 Nos in each compartment) having louvers and air vents gasket for natural flow of air \\"U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incomer/outgoing MCCB's and TPN copper bus bar and extension links of rating not less than the 1.5 times rated capacity of the respective MCCB's. The TPN bus bar and extension links shall be insulated with colour-coated heat shrinkable sleeve and shall be mounted on a suitable size 'F' class throughout the length of the TPN bus bar. Computer-cut self-adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be provided on bus bar chamber. All control wires shall be with not less than 1.5 Sqmm multistranded copper conductor and shall be properly bunched. tied, ferruled for proper identification and crimped with adequate size of lugs. The cubicle shall have a bottom channel of size 75x50mm, duly coated with zinc metal coating. A detachable predrilled gland plate of thickness 3.15 mm, zinc metal coated should be used at the bottom, indicating lamps LED type, 230 Volt, AC at the inlet of the unit to show three-phase availability at the inlet. An inspection lamp with an 11-watt CFL shall be fitted on the top side of inner shell. The degree of protection for the inner shell shall be IP-42 and carry the following controls. :- SCHEDULE ‘A’ PART- IBUILDING WORKS Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 51 | Extension of Annexe in Tech side corner of P-3 Hanger 01 room in each floor including Verandah, toilet & staircase and (double storey). Permanent specification in RCC framed structure with RCC roof with PCC Block Masonry incl flooring, painting, PVC wall lining, False ceiling , uPVC door/windows and PU roof treatment etc complete all as directed & shown in drawings. |
| 52 | Extension of Annexe in centre of P-3 Hanger 01 room (Single storey) with Permanent specification in RCC framed structure with RCC roof with PCC Block Masonry incl flooring, painting, PVC wall lining, False ceiling , uPVC door/windows and PU roof treatment etc complete all as directed & shown in drawings. |
| 53 | Extension of P1 Ops side 01 room in each floor with aluminium partition including Verandah, staircaseand (double storey) with Permanent specification in RCC framed structure with RCC roof with PCC Block Masonry incl flooring, painting, PVC wall lining, False ceiling , uPVC door/windows and PU roof treatment etc complete all as directed & shown in drawings. |
| 54 | Extension of P1 Tech side 02 room on each floor including additional room for E/M , toilet, (double storey), stair case with Permanent specification in RCC framed structure with RCC roof with PCC Block Masonry incl flooring, painting, PVC wall lining, False ceiling , uPVC door/windows and PU roof treatment etc complete all as directed & shown in drawings. Total amount of Schedule ‘A’ Part-I carried over to BOQ Rs 13145000.0 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- II(INTERNAL WATER SUPPLY) Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 55 | S & F galvanized iron water tubing 20 mm bore with screwed & socket joints, medium grade ISI mark with & including all fittings such as sockets ,bends ,elbow, unions ,tee ,diminishing pieces etc, concealed in walls/ceiling or laid in floors etc complete all as specified and directed. |
| 56 | S & F galvanized iron water tubing15 mm bore with screwed & socket joints, medium grade ISI mark with & including all fittings such as sockets ,bends ,elbow, unions ,tee ,diminishing pieces etc, concealed in walls/ceiling or laid in floors etc complete all as specified and directed. |
| 57 | S & F Bib tap 15mm bore cast copper alloy, chromium plated fancy type with crutch or butter fly handle( weight of bib tap shall be not less than 400 gm each ) screwed down screwed for galvanized iron pipe or for brass ferrule etc complete all as specified & directed. |
| 58 | S&F angle valve/stop valve 15mm bore chromium plated fancy type cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for brass ferrule fixed concealed in wall etc complete all as specified and directed. |
| 59 | Supply and fix 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe alongwith20 mm dia union and fixed etc complete all as specified and directed. |
| 60 | Supply and fix 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe alongwithunion etc complete all as specified and directed. |
| 61 | S & F for 15 mm bore fancy type pillar taps, cast copper alloy, with capstan heads chromium plated, screwed down highpressure, with or without lettered 'Hot' or 'Cold' w ith long screwed shanks and flynuts, screwed for iron pipe and fixed etccomplete all as specified & directed. |
| 62 | S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. Total amount of Schedule ‘A’ Part-II carried over to BOQ Rs 35327.2 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- IIIINTERNAL ELECTRIC SUPPLY Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 63 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 64 | M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame of required module at site, for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:-Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring. |
| 65 | All as per Srl item No. 2 but for One light, fan, bell point controlled by one switch. |
| 66 | All as per Srl item No. 2 but for One light point controlled by two Nos two way switch. |
| 67 | All as per Srl item No. 2 but for but with 2.5 sqmm copper conductor cable for one 5-amps socket outlet on independent board.(One circuit with max four points) |
| 68 | All as per Srl item No. 2 but for with copper conductor cable 2.5 Sqmm size for one 3-pin socket outlet, 15 amp on independent board.(One circuit with max one point) |
| 69 | M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 70 | Supply and fixing Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specified and as directed. |
| 71 | M&L for Modular switch 2 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge. |
| 72 | M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge. |
| 73 | S & F ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 74 | Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 Nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 %, electronic remote unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed. |
| 75 | Supply and fixing 4 Module Gang box including Modular socket outlet 16 Amps for AC, 240 Volts flush type white finish including plug top 20 Amps with modular piano type switch 20 Amps and LED indicator (RED) incl concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings and Modular white cover plate with frame 4 module to accommodate all the accessories complete with internal connections for switches and sockets, including 4 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and as directed. |
| 76 | Supply and fix LED luminaire 600 mm x 600 mm, 36 watts, 220 V AC with minimum 125 lumen per watt recessed type with high-efficiency PMMA diffuser soft glare-free light with motion sensors for auto switching off and on complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeand as specified & directed. |
| 77 | Supply and fixing air ventilating fan 300 mm sweep Metallic body, AC, single phase, 230 volts, complete with louvers shutters and including PVC insulated 3 core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing the same for distrubed surfaces to match with the adjoining surfaces all as specified and directed. |
| 78 | Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 79 | Supply and fixing GI Pipe bend to shape 1.5 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed. |
| 80 | Supply and fix factory made VTPN MCCB DB's, IP-43 protection with double door with 200 Amps copper busbar with neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of MCCB upto 100 Amps as incomer and SP/TP MCB's as outgoings, 4 way grouted flush in walls with cement morter 1:4 complete all as specified and directed. (MCCBs / MCBs shall be measured and paid seperately) |
| 81 | Supply and fix sheet metal enclosure powder coated single phase suitable for 40 Amp MCB 2 pole IP 43 Metal Door SPN DB 8 way double door with bus bar including grouting on the wall using screws and rawal plugs and making good disturbed surfaces to match with the existing colour of wall complete all as specified.Note: MCBs will be measured and paid separately |
| 82 | Supply and fix sheet metal enclosure powder coated single phase suitable for 40 Amp MCB 2 pole IP 43 Metal Door SPN DB 12 way double door with bus bar including grouting on the wall using screws and rawal plugs and making good disturbed surfaces to match with the existing colour of wall complete all as specified.Note: MCBs will be measured and paid separately |
| 83 | Supply and fixing MCCB TP, 433 volt, 16 KA, 100 Amps capacity all as specified and directed. |
| 84 | Supply and fixing MCB SPN, 240 volt, 10 KA, 40 Amps capacity all as specified and directed. |
| 85 | Supply and fixing MCB SP, 240 volt, 10 KA, 40 Amps capacity, all as specified and directed. |
| 86 | Supply and fixing MCB SP, 230 volt, 10 KA, 16 Amps capacity, all as specified and directed. |
| 87 | Supply and fixing MCB SP, 230 volt, 10 KA, 06 Amps capacity, all as specified and directed. |
| 88 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed multi stranded copper conductor cable of size 4.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (For Split AC wiring)(Note: Two runs of single-core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 89 | M&L for concealed sub main wiring using two single core PVC insulated, unsheathed multi stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (From TPN DB to SPN DB)(Note: Two runs of single-core PVC cable with one run of earth conductor and conduit shall be measured as one unit) |
| 90 | M&L for laying of Rigid non-metallic PVC conduit,, exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks 32 mm dia consealed in wall complete all as specified. Total amount of Schedule ‘A’ Part-III carried over to BOQ Rs 978844.78 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- IVEXTERNAL ELECTRIC SUPPLY Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 91 | Supply, Laying & connecting cable 1100 Volts grade, stranded aluminum conductor, screened, XLPE insulated, armoured shielded and PVC sheathed cable of 50 Sqmm x 3.5 core sizes conforming to IS 7098 (Part-I) amended up to date, complete all as specified and directed. Note:- (i). Lugs/Glands/Saddles of suitable size required for fixing cables in panels/junction boxes /on walls shall be included in the item rate. |
| 92 | All as per srl item No. 1 above but for cable of size 16 Sqmm x 2 Core |
| 93 | M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50Mtrs below ground level) connected to GI strip 25×4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, PCC chamber using PCC(1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally up to 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on Electrical plate No.3 of SSR Part-I (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results (in white) on a black painted M.S. Plate (size 300x300x3mm th) duly welded with angle iron of size 40X40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.Note :- (i) GI strip 25×4mm and GI pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) Excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) The rates quoted by the contractor are deemed to be included for MS sheet of size 300x300x3mm th, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm, 60cm long and grouted with PCC block of size 200x200x250mm(PCC 1:3:6 using 20mm grade stone aggregate including necessary earth work for marking the result and purpose. |
| 94 | M&L for earthing complete with galvanised steel pilpe electrode 40mm bore medium grade, 2.5 metres length,buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as Plate No. 2 connected to earthing test point all as specified incl 20 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, PCC chamber using PCC(1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally up to 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on Electrical plate No.2 of SSR Part-I (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results (in white) on a black painted M.S. Plate (size 300x300x3mm th) duly welded with angle iron of size 40X40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.Note :- (i) GI wire 4mm dia and GI pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) Excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) The rates quoted by the contractor are deemed to be included for MS sheet of size 300x300x3mm th, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm, 60cm long and grouted with PCC block of size 200x200x250mm(PCC 1:3:6 using 20mm grade stone aggregate including necessary earth work for marking the result and purpose. Total amount of Schedule ‘A’ Part-IV carried over to BOQ Rs 145443.0 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- VPARKING SHED Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 95 | M&L for Plain cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., comeplete all as specified and directed. |
| 96 | M&L for RCC M-25 design mix concrete (using 20mm graded stone aggregate) as in foundations/footings complete all as specified and as directed. |
| 97 | M&L for MS structureal steel Fe 410 Gd E250 in roof trusses (framed)trussed, purlins, rafters etc connecting with bolts/welding to baseplates etc complete all as specified and as directed |
| 98 | M&L for MS plates Fe 410 Gd E250 in roof trusses (framed)trussed, etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed |
| 99 | M&L for 20 MM dia MS bolts and nuts made with hexagonal or square headed one end and screwed the other and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed |
| 100 | S&F Pre painted galuvalume aluminium zink coating GI based corrugated sheet 0.5mm thick of an colur having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed. |
| 101 | M&L for preparation of new steel surfaces and applying two caots of synthetic enamel paint over a coat of redoxide zink crome primer for pipes any description n exc 60 cm girth complete all as specified and as directed Total amount of Schedule ‘A’ Part-V carried over to BOQ Rs 206926.75 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- VISEWAGE DISPOSAL Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 102 | M&L for PCC 1:4:8 type D-2(using 40mm graded stone aggregate ) in foundation complete all as specified and directed. |
| 103 | M &L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed. |
| 104 | M & L M&L for 200mm reinforced concrete pipes of class NP2 with one collar per length of pipe complete all as specified and directed. |
| 105 | M& L Pre-cast cement concrete block masonry type C1 1:3;6 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, completebuilt in cement mortar 1:6 complete all as specified and directed. |
| 106 | M&L Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) as in coping including necessary form work complete all as specified and directed. |
| 107 | M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section complete all as specified and directed. |
| 108 | Extra forming fair finished drain or channels of 30cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 109 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed. |
| 110 | M&L for pre-cast RCC slabs as in manhole covers in 1:2:4 type B1 using 20 mm graded stone aggregate, set in cement mortar (1:4) incl use and waste of form work complete all as specified and directed. |
| 111 | M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. Total amount of Schedule ‘A’ Part-VI carried over to BOQ Rs 307211.14 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- VIIGATE WITH RCC PILLAR Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 112 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation , filling and mass concrete all as specified. |
| 113 | Material and Labour for RCC M 25 design mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc. complete all as specified and directed. |
| 114 | Material and Labour for RCC M 25 design mix using 20 mm graded stone aggregate in columns, pillars post and struts complete all as specified and directed. |
| 115 | Material and Labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete complete all as specified and directed. |
| 116 | Material and Labour for formwork rough finish to sides of concrete pillars, columns and struts square or rectangular rough finished surfaces of concrete complete all as specified and directed. |
| 117 | Supply and Fix 10 mm dia and over TMT bar for reinforcement cut to length bent to shape required including crancking bending, hooking ends and binding with MS wire ( annealed) not less than 0.9 mm dia all as specified and directed. |
| 118 | All as per item No here-in-above but 5mm dia and over TMT bar in stirrups, spaces, binders nibs etc. |
| 119 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in finished even and fair in CM 1:6, all as specified and directed. |
| 120 | Two coats of cement base paint over a coat of chalk whitening on new plastered surfaces complete all as specified and directed. |
| 121 | S&F for Fe-410- W(Gde E-250) quality B framed work as in sliding gates of angle or other section with gusset plates, rails, braces,wheels etc., complete, drilled for fixing of steel sheeting or other covering. gates, etc. to be prepared for hanging or sliding with and including either hooks and hinges ; also fastening andfixing complete. |
| 122 | S&F 50mm dia MS rollers and pintel, nut, bolts, etc complete all as specified and directed. |
| 123 | M&L for PCC (1:2:4) B-1, using 20 mm graded stone aggregates, as in kerb/benching/coping, bed plates, for fixing hold fast, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 124 | M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome all as specified and directed. Total amount of Schedule ‘A’ Part-VII carried over to BOQ Rs 216510.9 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- VIIIADDN/ALTN TO BLDG NO. P-1 & P-3 Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 125 | Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete all as specified and directed. |
| 126 | M&L Brick work with Sub class `B' Bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 127 | M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces of wall in CM(1:4) surface finished even and fair with complete all as specified and directed. |
| 128 | M&L for preparation of new plastered surfaces on walls of any height and apply two coats of oil bound distemper over two coats of 2mm thick JK/Birla wall care putty on plastered surfaces of wall complete all as specified and directed. |
| 129 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 130 | M&L Screed bed for CM 1:4 or bedding layer of mortar 15 mm thick for aying floor finishes complete all as specified and directed. |
| 131 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl joining in neet cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed. |
| 132 | M&L for Glazed ceramic tiles of size 300 x 450 x 7mm thick on vertical surfaces such as in dado/skirting and rendering in CM 1:3 ,10mm thk on fair faces of wall surfaces etc, all as specified and as directed by Engineer-in-Charge. |
| 133 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards/slabs/blankets, any thickness any type including cover fillets,complete all as specified and directed. |
| 134 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) each including iron mongories complete all as specified and directed. |
| 135 | Taking down Chowkhats or frames exc. 1.5 sq. m but n exc 4.00 sqm each but with shutters (without taking off shutters from the frames) each including iron mongories complete all as specified and directed. |
| 136 | Demolition of cement concrete ( reinforced) roofs, floors (other than ground floors) beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed . |
| 137 | Dismantling water tanks capacity exc 500 & n.exc 1000 ltr capacity and removing to stores all as specified and directed. |
| 138 | S&F rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified of 1000 Ltr capacity complete all as specified and directed. |
| 139 | S&F float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe ( Min. wt. 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed. |
| 140 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm dia. |
| 141 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20mm dia. |
| 142 | S&F steel tubing 15mm bore medium grade with all fittings and fixed to wall, floor and ceiling etc c complete all as specified and directed |
| 143 | S&F steel tubing 20mm bore medium grade with all fittings and fixed to wall, floor and ceiling etc c complete all as specified and directed |
| 144 | Cutting chases, pinning in, making good to facings whre required and pointing in cement mortaor 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good, cutting not exc 10cm girth. |
| 145 | S & F in repair 20mm dia Gun metal globe or gate valave with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 146 | S & F in repair 15mm dia Gun metal globbe or gate valave with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 147 | S&F repairs PVC connection 15mm size with PTMT CP brass Nuts of lenhth 600mm complete all as specified and as directed by Engineer-in-Charge |
| 148 | S&F sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. |
| 149 | M & L for 100mm dia cast iron floor trap including 100mm dia PTMT Gratting doom including jointing to waste pipe fixed in PCC (1:2:4) type B1, complete all as specified and directed. |
| 150 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 151 | M&L for 20 mm thick Granite(of any type) work ( table rubbed and polished) in wash hand basin , urinal partition, steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed by Engineer-in-charge |
| 152 | Dismantling structural steel work including doors, Window gates but excluding framed truss, fencing etc complete all as specified and directed. |
| 153 | S & F in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent and fixing at site on PVC frame all as specified and directed by Engineer-in-Charge. |
| 154 | M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as directed by Engineer-in-Charge. |
| 155 | S&F in repair MS galvanised powder coated suspended false ceiling system with grid of size 605mm x 605mm, consisting of mild steel galvanised powder coated main runner of size 24mmx32mm and cross Tee of size 24mm x 27 mm and wall angle of size 22.2mmx22.2mm, suspended with 4 mm dia GI wire hanger at 1200 mm spacing, fixed with steel dash fasteners or from purlin of roofs with butterfly clips etc includding16mm thick Armstong RH DUNE 99 Borad ( Semiperforted) in ceiling fixed to GI snap grid frame work with hold screws, of any height upto 8.5m with adjustable cleat of J hook including making provision for housing light fitting, AC grils etc complete including fixing, re-fixing falseceiling lights, wastage T&P as per manufacturer's instructions and complete all as specified and directed by Engr-in-Charge. complete all as specified.. |
| 156 | Demolition of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscoveringscomplete all as specified and directed . Total amount of Schedule ‘A’ Part-VIII carried over to BOQ Rs 282649.11 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- IXSITE CLEARANCE AND DEVELOPMENT Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 157 | Demolition of cement concrete in pavement ( PQC ) in ground floor ( below or above ground level ) any thickness by cutting/breaking through mechanical means (PQC Cutting machine, miller machine, Hydraulic excavator) and removing the debris to outside MOD land complete all as specified and as directed.( Note : In case of any damage to adjoining slab, same shall be make good by the contractor at his own cost and expenses with and using epoxy resin mortar to the entire satisfaction of Engineer in charge) Total amount of Schedule ‘A’ Part-IX carried over to BOQ Rs 215543.67 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE ‘A’ PART- XEXCAVATION AND EARTHWORK Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 158 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation etc., or for shaft, wells, pier holes etc. n. exc. 10sqm on plan and n. exc. 1.5m in depth and getting out in hard/dense Soil complete all as specified and as directed.Note :- Cutting of PQC floor if required at site shall also deemed to be included in the quoted rate. |
| 159 | Ditto as item No.01 but depth exc 1.5m and n.exc 3.0m |
| 160 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, laying pipes cables etc n.exc 10 sqm on plan and n.exc 1.5m depth and getting out in soft /loose soil complete all as specified and as directed. |
| 161 | Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed. |
| 162 | Removing Excavated soils exceeding 250 M but n. Exc 500 m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. |
| 163 | Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and as directed. Total amount of Schedule ‘A’ Part-X carried over to BOQ Rs 97748.4 Signature of Contractor DCWE (Contracts)For Accepting Officer SCHEDULE OF CREDIT NOTES:1. The materials listed below retrieved from demolition/dismantling as specified in Schedule of credit shall become the property of the contractor and the credit amount as indicated below shall be recovered from the RAR as the work proceeds. Demolition of the work shall be carried out after it is handed over for demolition all as directed by the Engineer-in-Charge. Any other retrieved item not listed below shall become Govt. property.2. The unit rate of salvage materials which will become the property of contractor as assessed by the department is indicated in the schedule of credit and it is final and binding. The contractor is deemed to have visited the site and made his own assessment regarding condition of the materials. No claim of the contractor. Whatsoever against the department regarding actual cost of salvage material is admissible.3. The contractor shall be responsible to remove the materials obtained from demolition from the site as directed and the site shall be left clean and tidy and same shall be deemed to be included in the rates quoted for demolition.4. The contractor shall be allowed to remove the salvage materials from the site only after written approval of the AGE(I) after necessary recovery has been made in the RAR. However, in case of any dispute regarding demolished item, decision of CWE shall be final and binding upon both the parties.5. The quantities mentioned under column 4 are approximate and are given as rough guide only. The quantities obtained from items of Schedule 'A' for demolition shall be considered for credit. The tenderer shall not have any claim whatsoever for any variation of quantities given in Schedule of credit. Srl No Description of items of works Unit Rate in Rs No of units Amount in Rs |
| 164 | Old floor/wall tiles |
| 165 | Old U/S Chowket with shutters nexc 1.5 Sqm including all hard ware fittings |
| 166 | Old U/S Chowket with shutters exc 1.5 Sqm but n exc 4.0 Sqm including all hard ware fittings |
| 167 | Old unserviceable GI tubing 15mm dia |
| 168 | Old unserviceable GI tubing 20mm dia |
| 169 | Old unserviceable PVC water storage tank with fittings like gate valve, float valve etc of any dscription 1000 ltr capacity |
| 170 | Old unserviceable bib tap of any dscription obtained |
| 171 | Old unserviceable stop valves /angle cock of any dscription |
| 172 | Old unserviceable flushing cistern of any dscription |
| 173 | Old unserviceablve Pillar tap of any description |
| 174 | Old unserviceable towel rail of any description |
| 175 | Old unserviceable shower health fucet of any description |
| 176 | Old unserviceable looking mirror of any description |
| 177 | Old unserviceable Paper holder of any description |
| 178 | Old unserviceable structural steel of any description |
| 179 | Old unserviceable False ceiling of any description |
| 180 | Old unserviceable brick work |
| 181 | Old unserviceable Steel/galvalume Sheets |
| 182 | Old unserviceable iron work |
| 183 | Old Unserviceable LT Panels Total amount of Credit Schedule 51903.0 Signature of Contractor DCWE (Contracts)For Accepting Officer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender