Tender For Lift Irrigation Scheme Tailbal - Construction Of 01 No. Additional New Pump At Khashipora For Lis Tailbal.
Tender Value
36.23 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
11 days left
EMD
73000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lift Irrigation Scheme Tailbal - Construction Of 01 No. Additional New Pump At Khashipora For Lis Tailbal.
BOQ
| Sl. No. | Item Description |
| 1 | Manufacture, Supply, Installation, Testing & Commissioning of 05 Cusec capacity, 08 Mtr. dynamic head Horizontal End Suction Centrifugal Pumping Unit as per the following specifications:As per the specifications mentioned in Annnexure E of the eNIT |
| 2 | SITC of 40 HP Star-Delta Starter suitable for operation of 415 V ±10%, 50 Hz, 3-phase squirrel cage induction motor, complete with sheet steel IP54 enclosure, star, main and delta contactors, adjustable thermal overload relay, star-delta timer, single phasing and phase failure protection, push buttons, indicating lamps, control wiring, terminal blocks, cable glands, earthing terminals and all other standard accessories required for safe and satisfactory operation. The starter shall be manufactured using L&T/Schneider/Siemens/ABB/Havells or equivalent/ As per EOI, approved make switchgear and shall conform to IS/IEC 60947. The item includes complete installation, testing and commissioning over in all respects. |
| 3 | SITC of 50 kVA, 415 V ±10%, 50 Hz, 3-phase, manually operated oil-cooled voltage stabilizer suitable for operation of 3-phase induction motors, complete with copper wound transformer, off-load tap changing arrangement, incoming and outgoing terminals, earthing terminals, lifting lugs, M.S. tank, base channels, all internal wiring, insulating oil, foundation hardware and all standard accessories required for safe and satisfactory operation. The stabilizer shall conform to relevant IS standards, and the item shall include complete installation, testing and commissioning over in all respects. |
| 4 | Providing and fitting of 125 Amp 3-pole 415V MCCB with thermal magnetic release having 36kA breaking capacity (Ics= 100% Icu) (Make: L&T d-sine or equivalent/ As per EOI) |
| 5 | Providing and fitting of 25 sqmm XLPE insulated, 1100V single core armoured industrial copper cable conforming to IS 7098(Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab/ substantially equivalent/ As per EOI) |
| 6 | Providing, supplying and fixing a metering board comprising voltmeter, ammeter, indicating lamps, control wiring, terminals, space for MCCB fixture and mounting plate, complete with testing and commissioning. |
| 7 | Providing, fabrication, supplying, laying, fitting, testing and commissioning of 350 mm dia MS suction pipe, 5 mm thick, fabricated from tested MS plates conforming to IS 2062, complete with welded circumferential and longitudinal joints, both-end MS slip-on/weld neck flanges drilled to suit mating flanges, stiffening rings (where required), supports, cutting, edge preparation, welding, surface cleaning, one coat oxide primer and two coats synthetic enamel paint, including transportation, erection, alignment, nuts, bolts, gaskets, testing and commissioning, complete in all respects. |
| 8 | Providing, fabrication, supplying, laying, fitting, testing and commissioning of 300 mm dia MS delivery pipe, 4 mm thick, fabricated from tested MS plates conforming to IS 2062, complete with longitudinal and circumferential welding, both-end MS flanges drilled to suit mating flanges, cutting, edge preparation, welding, supports, surface cleaning, one coat oxide primer and two coats synthetic enamel paint, including transportation, erection, alignment, nuts, bolts, gaskets, testing and commissioning, complete in all respects. |
| 9 | Providing, fabrication, supplying, laying, fitting, testing and commissioning of 350 mm dia MS delivery pipe, 5 mm thick, fabricated from tested MS plates conforming to IS 2062, complete with welded circumferential and longitudinal joints, both-end MS slip-on/weld neck flanges drilled to suit mating flanges, stiffening rings (where required), supports, cutting, edge preparation, welding, surface cleaning, one coat oxide primer and two coats synthetic enamel paint, including transportation, erection, alignment, nuts, bolts, gaskets, testing and commissioning, complete in all respects. |
| 10 | SITC of 350 mm dia Cast Iron Foot Valve conforming to IS 4038, suitable for installation on 350 mm dia suction pipeline, complete with C.I. body, seat and renewable facing ring, strainer, hinged flap with rubber sealing, stainless steel hinge pin, nuts, bolts and washers, all internal components, flange drilling as per IS standards, rubber gasket, jointing material and all accessories. The item shall include lowering into position, alignment, fixing to the suction pipe, tightening of flange joints, testing for leakage and proper operation, and commissioning, complete in all respects. |
| 11 | Providing, fabrication, supplying, fitting, testing and commissioning of 350 mm dia MS Long Radius Bend fabricated from 5 mm thick MS plate conforming to IS 2062, comprising segmented (mitred) construction with smooth internal profile, complete with both-end MS flanges drilled to suit mating flanges, cutting, rolling, edge preparation, welding, grinding, surface cleaning, one coat oxide primer and two coats synthetic enamel paint, including nuts, bolts, rubber gaskets, transportation, erection, alignment, testing and commissioning, complete in all respects. |
| 12 | Providing, fabrication, supplying, fitting, testing and commissioning of 300 mm dia MS obtuse angle Bend fabricated from 4 mm thick MS plate conforming to IS 2062, comprising segmented (mitred) construction with smooth internal profile, complete with cutting, rolling, edge preparation, welding, grinding, surface cleaning, one coat oxide primer and two coats synthetic enamel paint, including nuts, bolts, rubber gaskets, transportation, erection, alignment, testing and commissioning, complete in all respects. |
| 13 | Providing and fitting of 300 mm dia PN 10 DI double flanged sluice valve at intake conforming to IS-14846 including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Make: Zoloto/ Sant/ Kirloskar/ Bikaner/ substantially equivalent/ As per EOI) |
| 14 | Connection to existing priming pumping system by way of providing and fitting GI/MS pipe with required tee connection to the existing manifold, gate valve/ball valve, unions, nuts, bolts etc. of the existing priming line, complete with testing and commissioning, in all respects. |
| 15 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 16 | Earthwork in excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth & lead upto 1.5 m, disposed earth to be neatly levelled dressed. (All kinds of soil) |
| 17 | Dumping stone excluding cost of stones in Horizontal on level |
| 18 | Supply of stone soling |
| 19 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 20 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 21 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 24 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 25 | Columns, pillars, piers, abutments, posts and struts. |
| 26 | Suspended floors, roofs, landings, balconies and access platforms. |
| 27 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 28 | Plaster of 12 mm thickness using 1:4 mix |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 30 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 31 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 32 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete in: Above plinth level and upto floor V level with Non Modular bricks |
| 33 | Brick work with common burnt clay selected bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) including curing complete in: From ground level upto plinth level With Non Modular bricks |
| 34 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diameter |
| 35 | Distempering with 1st quality acrylic distemper, having VOC (Volatile OrganicCompound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 36 | Providing and laying PVC pipe (weep holes 75mm dia). |
| 37 | Hire charges of Drill machine upto 30 mm dia. |
| 38 | Skilled Labour for drilling machine |
| 39 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 40 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 41 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood |
| 42 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Kiln seasoned & chemically treated hollock wood |
| 43 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 44 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Kiln seasoned and chemically treated hollock wood: 35mm |
| 45 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 46 | Carriage of materials from source to site of work by mechnical transport including,loading,unloading and stacking Avg lead 15 km Stone Soiling |
| 47 | 40mm agg. |
| 48 | 20mm agg. |
| 49 | Cement |
| 50 | Steel |
| 51 | Disposal of surplus excavated material (earth) from actual site to road site by mechanical means for an avg. of 5km |
| 52 | Bricks |
| 53 | Carriage of materials from source to site of work by manual transport including,loading,unloading and stacking for an Avg lead 50 m Stone Soiling |
| 54 | 40mm agg. |
| 55 | 20mm agg. |
| 56 | Cement |
| 57 | Steel |
| 58 | Disposal of surplus excavated material (earth) from excavated site to road site by manual means. |
| 59 | Bricks |
| 60 | Carriage of materials from source to site of work by manual transport including,loading,unloading and stacking for an Avg lead 100 m Stone soiling |
| 61 | 40 mm agg. |
| 62 | 20 mm agg. |
| 63 | Cement |
| 64 | Disposal of surplus excavated material (earth) from excavated site to road site by manual means. |
| 65 | Carriage of materials from source to site of work by manual transport including,loading,unloading and stacking for an Avg lead 150 m Stone Soiling |
| 66 | 40 mm agg. |
| 67 | 20 mm agg. |
| 68 | Cement Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender