Tender For Provision Of Toilet With Allied Infra At Panchgam Under The Aor Of Ge 874 Ews.
Tender Value
43.28 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
86560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Toilet With Allied Infra At Panchgam Under The Aor Of Ge 874 Ews.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Sep-2026 |
| 2 | 29-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30 cm deep and average 15cm deep and getting out soft/ loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L for plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' brick straight or curved on plan etc 6 mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 5 | M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 6 | Returning and filling including spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 7 | Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 8 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 complete all as specified and directed. |
| 10 | M&L for RCC M-25 Design mix using 20 m graded aggregate for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 11 | M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate for columns, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | M&L for RCC M-25 design mix using 20 mm graded stone aggregate for beams, cantilevers & lintel beams etc complete all as specified and directed. |
| 13 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed. |
| 14 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions for Square, Circular rectangular on plan or polygonal flat rough finished surfaces of concrete complete all as specified and directed. |
| 15 | Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 16 | M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately. |
| 17 | Supply only approved integral water proofing compound complete all as specified and directed. |
| 18 | M&L for 15mm thick plastering on other than fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed. |
| 19 | M&L for 10mm thick plastering on fair faces of bricks/concrete surfaces in CM 1: 4 and finished even & smooth complete all as specified and as directed. |
| 20 | M&L for mild steel work as in roof truss (framed) purlins crane gantries rail & fastening and heavy bracket (beam tea angle channel or flat section) including distance pieces cleats etc complete all as specified and directed. |
| 21 | M & L two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth complete all as specified and directed. |
| 22 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 23 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in prefabricated profiled ridge/ roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | M & L for applying two coats of cement based paint on external wall surfaces over a coat of primer incl preparation newly plastered surface complete all as specified and directed. |
| 25 | M&L Material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified and directed. |
| 26 | M&L for moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 27 | M&L hard core filling under floor, breaking stone or boulder exc 63mm and n. exc 100mm gauge of sand stone complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC type D2 1:3:6 (40 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed. |
| 29 | M&L for coloured glazed ceramic tiles (450X300 mm) x 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in CM (1:4) laid complete all as specified and directed. |
| 30 | M&L non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed. |
| 31 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as specified and directed. |
| 32 | S&F factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed. |
| 33 | S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 34 | M&L Second class softwood as in scantling, clean sawn fixed in position with nails, unframed work, complete, complete all as specified and as directed. |
| 35 | M & L plain framed panelled shutter 2nd class soft wood 30mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed. |
| 36 | S&F Galvanized mild steel wire cloth having 0.56mm dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 37 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 38 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dove tailed or welded including one shop coat of zinc chromite primer complete all as specified and directed. |
| 39 | S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed. |
| 40 | S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares in n. exc 0.5 sq.m in each pane complete all as specified and directed. |
| 41 | M&L for mild steel butt hinge medium weight cold rolled 100mm size complete all as specified and as directed. |
| 42 | M&L for mild steel butt hinge medium weight cold rolled 75mm size complete all as specified and directed. |
| 43 | S & F aluminium handles, cast type, anodized 150mm long complete all as specified and directed. |
| 44 | S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed. |
| 45 | S&F for 150mm length aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | S & F 200mm long aluminium alloy, anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 47 | S&F mild steel word as in flat iron as in hold fast complete all as specified and as directed. |
| 48 | M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair, complete all as specified and as directed. |
| 49 | S & F 300 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 50 | S&F for Rotational moulded polyethylene 2000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 51 | M&L for applying two coats of synthetic enamel paint including cleaning dusting of new or previously untreated wood of ply wood base surfaces for wall, door, window, ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 52 | S&F steel tubing galvanized iron medium grade with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed. |
| 53 | All as per Srl. item No. 52 here-in-before but bore of pipe 20mm. |
| 54 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia complete all as specified and directed. |
| 55 | S&F bevelled edge mirror of size 600x450 mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 56 | M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; complete all as specified and directed. |
| 57 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 58 | M&L for chequered cement concrete tiles (20cmx20cm) and 25mm thick in pathetic set and jointed in neat cement slurry and pointed in cement slurry and pointed in grey pigment to match with 20mm thick screed bed in CM 1:4) complete all as specified and directed. |
| 59 | M & L for Vitreous China wash basin, vertically mounted fancy bowl flat back size 550 x 400 mm including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete all as specified and directed. |
| 60 | M&L for Vitreous China squatting Pan \\"Orrisa Pattern\\" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed complete all as specified and directed. |
| 61 | S&F Vitreous China wash down water closet pan (pedestal pattern), white with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and as directed. |
| 62 | S&F vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 63 | S&F in repair PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets (10 Ltr) capacity complete all as specified and directed. |
| 64 | S&F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed. |
| 65 | S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and as directed. |
| 66 | Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 67 | M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type complete all as specified and as directed. |
| 68 | S & F Waste coupling of PTMT (half or full thread). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB complete all as specified and directed. |
| 69 | S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked) complete all as specified and directed. |
| 70 | S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 71 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or in trench complete all as specified and as directed. |
| 72 | S&F PVC gully trap square or round mouthed type (P) , size of trap 125x 110mm and jointing to drains with solvent cement complete all as specified and directed. |
| 73 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and as directed. |
| 74 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and as directed. |
| 75 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 76 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and as directed. |
| 77 | M&L for PVC (SWR) Reducer 110/75mm dia complete all as specified and as directed. |
| 78 | M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 79 | S&F clean swan batten at 30 cm centre to centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed. |
| 80 | M&L for Plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified. |
| 81 | M&L for lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed. |
| 82 | M&L for lagging on pipe of internal dia 20mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843 complete all as specified and directed. |
| 83 | S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 84 | M&L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, filling and mass concreting complete all as specified and as directed. |
| 85 | M & L walling of random rubble stone masonry built in Cement mortar 1:4 uncoursed, well bonded, bedded and solidly hearted and pointing surface in contact with earth in the same mortar, including providing weep holes as the work proceeds complete all as specified and directed. |
| 86 | M&L for providing, cement concrete 1:2:4 type B 1, using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 87 | M&L for rendering 15mm thick on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 88 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses for 40mm granite or trap stone complete all as specified and as directed |
| 89 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 90 | M & L for providing reinforced cement concrete type B-1 1:2:4, (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 91 | Removing of excavated material exc. 250m but not exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 92 | M& L for 100mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 93 | M&L for sand cushion under paving block including watering and consolidation for ILCB complete all as specified and as directed. |
| 94 | M&L 60mm thick factory made coloured inter locking cement concrete tiles with Grade of M-35 conforming to IS 15658-2006 manufactured by hydraulic pressure process, with grey cement and pigment laid over sand complete all as specified and directed. Note:- (i) Tiles shall be approved by GE in writing before incorporation in work . (ii) Sand for cushioning shall be measured & paid Separately. |
| 95 | Excavation over area not exceeding 1.50m deep and getting out in any type of soil complete all as specified and directed. |
| 96 | Excavation over area excavation exceeding 1.50m and not exceeding 3m in any type of soil complete all as specified and directed. |
| 97 | Excavation over area excavation exceeding 3.00 m and not exceeding 3.50 m in any type of soil complete all as specified and directed. |
| 98 | M & L for PCC M-15 grade mix by volume 1:2:4, nominal mix cement concrete delivered on bunker using 40mm graded crushed stone aggregate complete all as specified and as directed. |
| 99 | M & L PCC 1:4:8 type D-2 cement using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 100 | M&L for RCC M-25 design mix using 20mm graded aggregates in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed. |
| 101 | M&L for RCC M-25 design mix using 20mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 102 | Formwork to rough finished surfaces of concrete to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 103 | M & L for PVC (SWR) bends 75mm dia bore any radius complete all as specified and as directed. |
| 104 | M&L for brick work sub class 'B' old size brick, straight or curved on plan exceeding 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 105 | Supply only liquid water proofing compound complete all as specified complete all as specified and directed. |
| 106 | M & L PCC 1:2:4 type B - 1 (20 mm graded aggregate) as in span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 107 | S&F Mild steel framed work such as door or gates of angle or other section with gusset plates, rails braces etc., with ornamental and intricate design complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging , also fastening and fixing including shop coat of zinc chromate paint conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 108 | M&L 150 mm thick reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed. |
| 109 | M & L Concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6, type C-2 complete all as specified and directed. |
| 110 | M&L for construction of Soakage well, of size 6.00 m dia at bottom and 6.00 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. |
| 111 | Supply and lay steel pipe galvanized \\"Medium grade\\" including fittings 50 mm (2\\") dia complete all as specified and as directed. |
| 112 | Supply and lay steel pipe galvanized \\"Medium grade\\" including fittings 25 mm (1\\") dia complete all as specified and as directed. |
| 113 | M&L Lagging to 25 mm GI pipes used in internal/external water supply or Plumping all round with 25 min thick bonded mineral wool performed SNAP ON pipe sections of density 44 Kg/cum conforming to IS 1842. |
| 114 | Supply and fix Valves, Sluice, flanged or Class 1.6 PN, 50 mm (2\\") dia complete all as specified and as directed. |
| 115 | Supply and Fix stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 25 mm dia complete all as specified and as directed. |
| 116 | Supply and fix Non Return sluice Valve 50 mm (2\\") complete all as specified and as directed. |
| 117 | Supply and fix Cast Iron Air Release Valves with single air outlets conforming to IS 14845 size 50 mm dia bore and fixing up in Cast Iron Water Supply mains of size 50 mm dia complete all as specified and as directed. |
| 118 | S & F Pumping sets, centrifugal, electric driven, three phase supply and install complete upto 05 WHP inclusive of star delta and PCC foundation. |
| 119 | M & L for valve chamber and provision of new masonry valve chamber of size 1000x800mm solid block masonry 200mm thick over concrete foundation in PCC 1:4:8 D2 100mm thick,50mm thick PCC 1:2:4 type B1 in coping including 15 mm thick plastering in cement motor 1:4 for internal surface15 cm below normal ground level with MS sheet 3.15 thick hinged MS cover with locking arrangements. Lifting handle fitted to 50 × 50 × 6 mm angle iron frame and painting including necessary earth work complete all as specified and as directed. |
| 120 | M & L for point wiring for one light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dully including taking down point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed. |
| 121 | All as per Item No 120 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board. |
| 122 | All as per Item No 120 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board. |
| 123 | All as per Item No 120 above but wiring with 2.5 sqmm copper wire (FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 124 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 125 | S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed. |
| 126 | S & F switch socket combination 2 in 1, 6A flush type complete all as specified and as directed. |
| 127 | S & F switch socket combination 3 pin 16A, flush type complete all as specified and as directed. |
| 128 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 129 | Supply and fixing in replacement LED warm lights fitting 1x 10W, 220V,AC decorative box type with driver, holder including LED tube light 2' connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 130 | Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 131 | S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 132 | Supply and fix LED warm Bulb 9 Watt complete all as specified and directed. |
| 133 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 134 | S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V, fixed sunk/flush to the wall complete all as specified and directed. |
| 135 | S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and as directed. |
| 136 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and as directed. |
| 137 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, including service bracket for incoming through one twin core cable of size 16 Sqmm complete all as specified and directed |
| 138 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and as directed. |
| 139 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 4 core 25 sq mm complete all as specified and directed. |
| 140 | Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core 16 Sq mm complete all as specified and directed. |
| 141 | M&L for Main Panel Supply and installation in repairs, commissioning and testing Polycarbonate ASTA CPRI approved OEM made main LT Panel. |
| 142 | The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES including MCCBs and indicator lamps which shall be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel shall be anti-acid & anti corrosive. Degree of protection against mechanical load shall be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE only also share panel assembled by OEM, channel partner or sister concern assembly will not be accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket shall be internally embedded made of polyurethane. The Panels made by approved enclosures in MES & they shall submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The ASTA CPRI report shall have mention of following tests performed and passed out satisfactorily - Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer shall submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. The panel shall pass glow wire test 960 degrees Centigrade in accordance with 60695-2-11 (flame retardant and self-extinguishing) |
| 143 | INCOMER:- |
| 144 | 100 Amp, 4 pole MCCB, 36 KA - 01 No (INCOMER) |
| 145 | Digital Multifunctional Meter - 01 Nos |
| 146 | Set of LED type indicating lamps - 01 No |
| 147 | Bus Bar 200Amp TPN |
| 148 | OUTGOINGS: |
| 149 | MCCB 100 A 36K 4 P - 1 Nos |
| 150 | MCCB 63 Amp, TPN 10 KA - 02 Nos |
| 151 | Onload starter 20 Amps 01 no. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender