Power Boards / Undertakings / PSU Closing in 20 days TDR #57301764

Tender For Implementation Of Transmission Infrastructure To Evacuate 3200 Mw Thermal Power From Upcoming Generation Station At Chapar

Issued by Boards / Undertakings / PSU · Dhubri, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2026
20 days left
EMD
24 Crore
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhubri → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Implementation Of Transmission Infrastructure To Evacuate 3200 Mw Thermal Power From Upcoming Generation Station At Chapar

BOQ

Name of Work:- Implementation of transmission infrastructure to evacuate 3200 MW thermal power from upcoming generation station at Chapar
Sl. No. Item Description
1Isolators and accessories as per specification.
2Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required.
3245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with double earth switch.
4245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with one earth switch.
5245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
6245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch
772.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.
872.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch.
9Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required.
10245KV, Horizontal Double Breaktype Isolator with double earth switch.
11245KV, Horizontal Double Breaktype Isolator with one earth switch.
12245KV, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
13245KV, Horizontal Double Breaktype Isolator without earth switch
1472.5kV, Horizontal Double Break type Isolator without earth switch.
1572.5kV, Horizontal Double Break type Isolator with earth switch.
16Supply of insulator string assembly with antifog disc insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.
17400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
18400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
19220kV, 2x120kN double tension string suitable for HTLS Zebra equivalent (1600A) conductor.
20220kV, 2x120kN double suspension string suitable for Twin ACSR Moose conductor.
21220kV, 2x160kN double tension string suitable for Twin ACSR Moose conductor.
22220kV, 2x210kN double suspension string suitable for Quad ACSR Moose conductor.
23220kV, 4x160kN double tension string suitable for Quad ACSR Moose conductor.
24Conductors, Clamp Connectors
254'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required.
26ACSR Moose Conductor as per site requirement
27ACSR Panther Conductor
28Clamps & Connectors as per requirement
29Bus post insulator as per specification.
30Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.
31420KV, BPI
32245KV, BPI
3372.5KV, BPI
34Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.
35420KV, BPI
36245KV, BPI
3772.5KV, BPI
38Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification.
39630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.
40440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 1000KVA Station Service Transformer
41Surge Arrester as per spefication
42Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.
43398kV, 20kA, LA
44216KV, 10kA, LA
4560kV, 10kA, LA
46Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.
47398kV, 20kA, LA
48216KV, 10kA, LA
4960kV, 10kA, LA
50CVT and Wave Trap as per specification.
51Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.
52400kV, 8800pF, 3 Wdg CVT.
53220kV, 4400pF, 3 Wdg CVT.
54400KV, 3150A Wave Trap
55220KV, 1250A Wave Trap.
56Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.
57400kV, 8800pF, 3 Wdg CVT.
58220kV, 4400pF, 3 Wdg CVT.
59Outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required.
60245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.
61245kV, 3-phase, Ganged Operated, 3150A, 50kA for 3 sec.
6272.5kV, 1250A, 40kA for 3 sec.
63Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required
64400kV BMK
65220kV BMK
6633kV BMK
67Instrument Transformer (CT & PT) as per specification.
68Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required.
69220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
7072.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
71220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
7272.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
73Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required.
74220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
7572.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
76220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
7772.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
78Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.
79400kV GIS
80400kV Bus Bar Protection Panel
81400kV Line CRP (Line differential)
82400/220kV ICT CRP (500MVA)
83400kV Bus Reactor CRP
84400kV Tie Breaker CRP
85245kV GIS
86245kV Bus Bar Protection Panel
87245kV Line CRP
88400/220kV ICT CRP (500MVA)
89245kV Bus Coupler CRP
9072.5kV AIS
91Station Service Transformer control & Protection Panel
92Complete Substation System Automation System (As per specification )
93Station HMI (Main, Redundant and Metering) with Industrial PC
94Maintenance HMI (DR Workstation) with Industrial PC
95Gate way with PLCC and Fibre Optic Modem and Panel
96SAS Inverter (5kVA)
97Colour MFP Laser Printer
98GPS Clock System
9916 port Bay Ethernet Switch
100All interphase equipment for Gateway to SLDC
101VDU 75 inch
102Aux BCUs as per scheme requirement alongwith panel
10324 port Station Ethernet Switch
104SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
105Red Box
106All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords, furnitures for HMIs and printers, cables etc. as per requirement
107400 kV GIS Equipment (As per specification)
1083- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
1093- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation
1103- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
1113- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification
1123- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
113400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
114400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
11510 Ton EOT Crane for 400kV GIS Building
116Supply of Testing And Maintenance Equipment of GIS as specified
117SF6 Gas Service cart (filling, drying, storage, processing, evacuating etc.)
118SF6 gas Mask
119500MVA, 400/220/33kV, ONAN/ ONAF/ODAF, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification)
120500 MVA, 400/220/33 kV, Three phase Transformer with OLTC & Oil
121Oil & winding temperature monitoring system (FO based)
122Online DGA (Multi gas)
123Online insulating drying system
124Maintenance free breather
125RTCC Panel with AVR (TMS)
12610% Extra OIL for each transformer
127Rail track for transformer
128Pulling block for transformer
12980 MVAR Bus Reactor (with Oil)
13080 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil
131Pulling block for reactor
132Battery & Battery Chargers, DCDB & ACDB as per specification
133220V VRLA Battery, 1500AH
134220V, Dual Float Cum Boost Chargers, 300A
135220V, DCDB
13648V VRLA type Battery Bank, 620AH
13748V, SMPS Dual Float cum Boost Chargers, 125A
13848V, DCDB
139Main ACDB
140Sub ACDB
141MLDB with 415V/415V, 125kVA isolation transformer
142ELDB with 415V/415V, 50kVA isolation transformer
143HVAC DB
144MCBDB
145Power Line Carrier Communication Equipments
146HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
147Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
148IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
149LMU and LMDU
150EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card.
151CAT 6 armoured cable.
1522 wire telephone set
153Armoured Audio Cable
154OPGW equipments as per specification
155Transmission Equipment & SDH Equipment -STM16(ADM- up to five Direction)
156Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 22.02 & 22.03 below.)
157Optical Interface/SFP for:
158Line Interface to support STM 4 upto 100km
159Line Interface to support STM 4 upto 80km
160Line Interface to support STM 16 upto 60km
161Line Interface to support STM 16 upto 200km
162Tributary Cards
163E1 interface card (Minimum 63 interfaces per card)
164Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card)
1658 Port VOIP for remote locations
166Analog Telephone( 2-wire telephone for VOIP Gateway location)
167IEEE C37.94 (4 interfaces) to E1 converter/interface for integration with SDH equipment
168Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
169For SDH equipment(including DDF patching facilities and other accessories
170Main Distribution Frame(100 pairs)
171Craft Terminal
172Hardware (LAPTOP)
173Software
174Pre connectorized optical patch cords(Minium 8 patch cords per station)
175Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty
176Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc.
177LT Control Cable (1.1kV grade PVC copper)
1784C x 2.5 sqmm
1795C x 2.5 sqmm
1807C x 2.5 sqmm
18110C x 2.5 sqmm
18214C x 2.5 sqmm
18319C x 2.5 sqmm
1844P x 0.5 sqmm
185Others (Cable for fire fighting, illumination, CCTV, PA system etc.)
186LT Power Cable (1.1kV grade XLPE)
1871C x 150 sqmm Al.
1883.5C x 400 sqmm Al.
1893.5C x 150 sqmm Al.
1903.5C x 70 sqmm Al.
1913.5C x 35 sqmm Al.
1924C x 16 sqmm Al.
1934C x 4 sqmm Al.
1942C x 50 sqmm Al.
1952C x 16 sqmm Al.
1962C x 10 sqmm Al.
1972C x 6 sqmm Cu.
198Others (Cable for fire fighting, illumination, CCTV, PA system etc)
199Earthing
200Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
20140 mm Dia MS Rod for Main Earthmat and Riser
20275X 12 Mm GS (HDG) Flat for equipment and structure earthing
20350X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
20450 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
20540Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
20650x6 mm GS Flat as per site requirement
207Soil Resistivity Test And Soil Treatment As And When Required
208Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) and 400kV GIS Building with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
209Separate Earthing For kiosk building and all other switchyard buildings, fencing etc. with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
210Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc.
211400kV Columns
212400kV Beams
213220kV Columns
214220kV Beams
215Fire Alarm & Detection including all accessories as per specification
216Fire Alarm & Detection system for 400kV GIS Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc.
2175kg Portable and wheel/trolley mounted Fire Extinguishers for Switchyard
2185kg Portable Fire Extinguisher for 400kVGIS Hall
2195kg Portable Fire Extinguisher for Kiosk room
220Dry powder chemical type 10 kg. For 1 MVA transformer
221Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification.
222Hydrant system along with pumping arrangement & associated Civil works for fire protection system. Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (200 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe and Construction of Water reservior and Pump house for fire fighting. Construction of shed structure using Steel section by TATA of YST 310 Grade with RCC block as base. Shed roofing to be completed with PPGI sheet roofing with minimum 0.6 mm thickness. (Design and Drawing to be prepared by Contractor and shall be approved by AEGCL)
223HVWS system (automatic emulsifier and manual hydrant point both) for 500 MVA ICT-2 Nos. and 80MVAr Bus Reactor -2 nos and 80MVAr Line Recator - 2 nos.
224NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 500MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos.
225250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement.
226Lighting System
227Outdoor Lighting
228Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.
229Public Addressing System & CCTV complete with all accessories as per specification.
230Lightning protection system (LCLM 50 metres high)
2317/3.66mm GI shield wire
2323 meter, Lightning spike for lightning protection
233Isolators and accessories as per specification.
234Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required.
235245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with double earth switch.
236245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with one earth switch.
237245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
238245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch
23972.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.
24072.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch.
241Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required.
242245KV, Horizontal Double Breaktype Isolator with double earth switch.
243245KV, Horizontal Double Breaktype Isolator with one earth switch.
244245KV, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
245245KV, Horizontal Double Breaktype Isolator without earth switch
24672.5kV, Horizontal Double Break type Isolator without earth switch.
24772.5kV, Horizontal Double Break type Isolator with earth switch.
248Supply of insulator string assembly with antifog disc insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.
249400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
250400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
251220kV, 2x120kN double tension string suitable for HTLS Zebra equivalent (1600A) conductor.
252220kV, 2x120kN double suspension string suitable for Twin ACSR Moose conductor.
253220kV, 2x160kN double tension string suitable for Twin ACSR Moose conductor.
254220kV, 2x210kN double suspension string suitable for Quad ACSR Moose conductor.
255220kV, 4x160kN double tension string suitable for Quad ACSR Moose conductor.
256Conductors, Clamp Connectors
2574'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required.
258ACSR Moose Conductor as per site requirement
259ACSR Panther Conductor
260Clamps & Connectors as per requirement
261Bus post insulator as per specification.
262Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.
263420KV, BPI
264245KV, BPI
26572.5KV, BPI
266Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.
267420KV, BPI
268245KV, BPI
26972.5KV, BPI
270Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification.
271630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.
272440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 1000KVA Station Service Transformer
273Surge Arrester as per spefication
274Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.
275398kV, 20kA, LA
276216KV, 10kA, LA
27760kV, 10kA, LA
278Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.
279398kV, 20kA, LA
280216KV, 10kA, LA
28160kV, 10kA, LA
282CVT and Wave Trap as per specification.
283Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.
284400kV, 8800pF, 3 Wdg CVT.
285220kV, 4400pF, 3 Wdg CVT.
286400KV, 3150A Wave Trap
287220KV, 1250A Wave Trap.
288Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.
289400kV, 8800pF, 3 Wdg CVT.
290220kV, 4400pF, 3 Wdg CVT.
291Outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required.
292245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.
293245kV, 3-phase, Ganged Operated, 3150A, 50kA for 3 sec.
29472.5kV, 1250A, 40kA for 3 sec.
295Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required
296400kV BMK
297220kV BMK
29833kV BMK
299Instrument Transformer (CT & PT) as per specification.
300Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required.
301220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
30272.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
303220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
30472.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
305Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required.
306220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
30772.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
308220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
30972.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
310Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.
311400kV GIS
312400kV Bus Bar Protection Panel
313400kV Line CRP (Line differential)
314400/220kV ICT CRP (500MVA)
315400kV Bus Reactor CRP
316400kV Tie Breaker CRP
317245kV GIS
318245kV Bus Bar Protection Panel
319245kV Line CRP
320400/220kV ICT CRP (500MVA)
321245kV Bus Coupler CRP
32272.5kV AIS
323Station Service Transformer control & Protection Panel
324Complete Substation System Automation System (As per specification )
325Station HMI (Main, Redundant and Metering) with Industrial PC
326Maintenance HMI (DR Workstation) with Industrial PC
327Gate way with PLCC and Fibre Optic Modem and Panel
328SAS Inverter (5kVA)
329Colour MFP Laser Printer
330GPS Clock System
33116 port Bay Ethernet Switch
332All interphase equipment for Gateway to SLDC
333VDU 75 inch
334Aux BCUs as per scheme requirement alongwith panel
33524 port Station Ethernet Switch
336SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
337Red Box
338All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords, furnitures for HMIs and printers, cables etc. as per requirement
339400 kV GIS Equipment (As per specification)
3403- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
3413- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation
3423- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
3433- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification
3443- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
345400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
346400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
34710 Ton EOT Crane for 400kV GIS Building
348Supply of Testing And Maintenance Equipment of GIS as specified
349SF6 Gas Service cart (filling, drying, storage, processing, evacuating etc.)
350SF6 gas Mask
351500MVA, 400/220/33kV, ONAN/ ONAF/ODAF, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification)
352500 MVA, 400/220/33 kV, Three phase Transformer with OLTC & Oil
353Oil & winding temperature monitoring system (FO based)
354Online DGA (Multi gas)
355Online insulating drying system
356Maintenance free breather
357RTCC Panel with AVR (TMS)
35810% Extra OIL for each transformer
359Rail track for transformer
360Pulling block for transformer
36180 MVAR Bus Reactor (with Oil)
36280 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil
363Pulling block for reactor
364Battery & Battery Chargers, DCDB & ACDB as per specification
365220V VRLA Battery, 1500AH
366220V, Dual Float Cum Boost Chargers, 300A
367220V, DCDB
36848V VRLA type Battery Bank, 620AH
36948V, SMPS Dual Float cum Boost Chargers, 125A
37048V, DCDB
371Main ACDB
372Sub ACDB
373MLDB with 415V/415V, 125kVA isolation transformer
374ELDB with 415V/415V, 50kVA isolation transformer
375HVAC DB
376MCBDB
377Power Line Carrier Communication Equipments
378HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
379Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
380IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
381LMU and LMDU
382EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card.
383CAT 6 armoured cable.
3842 wire telephone set
385Armoured Audio Cable
386OPGW equipments as per specification
387Transmission Equipment & SDH Equipment -STM16(ADM- up to five Direction)
388Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 22.02 & 22.03 below.)
389Optical Interface/SFP for:
390Line Interface to support STM 4 upto 100km
391Line Interface to support STM 4 upto 80km
392Line Interface to support STM 16 upto 60km
393Line Interface to support STM 16 upto 200km
394Tributary Cards
395E1 interface card (Minimum 63 interfaces per card)
396Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card)
3978 Port VOIP for remote locations
398Analog Telephone( 2-wire telephone for VOIP Gateway location)
399IEEE C37.94 (4 interfaces) to E1 converter/interface for integration with SDH equipment
400Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
401For SDH equipment(including DDF patching facilities and other accessories
402Main Distribution Frame(100 pairs)
403Craft Terminal
404Hardware (LAPTOP)
405Software
406Pre connectorized optical patch cords(Minium 8 patch cords per station)
407Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty
408Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc.
409LT Control Cable (1.1kV grade PVC copper)
4104C x 2.5 sqmm
4115C x 2.5 sqmm
4127C x 2.5 sqmm
41310C x 2.5 sqmm
41414C x 2.5 sqmm
41519C x 2.5 sqmm
4164P x 0.5 sqmm
417Others (Cable for fire fighting, illumination, CCTV, PA system etc.)
418LT Power Cable (1.1kV grade XLPE)
4191C x 150 sqmm Al.
4203.5C x 400 sqmm Al.
4213.5C x 150 sqmm Al.
4223.5C x 70 sqmm Al.
4233.5C x 35 sqmm Al.
4244C x 16 sqmm Al.
4254C x 4 sqmm Al.
4262C x 50 sqmm Al.
4272C x 16 sqmm Al.
4282C x 10 sqmm Al.
4292C x 6 sqmm Cu.
430Others (Cable for fire fighting, illumination, CCTV, PA system etc)
431Earthing
432Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
43340 mm Dia MS Rod for Main Earthmat and Riser
43475X 12 Mm GS (HDG) Flat for equipment and structure earthing
43550X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
43650 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
43740Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
43850x6 mm GS Flat as per site requirement
439Soil Resistivity Test And Soil Treatment As And When Required
440Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) and 400kV GIS Building with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
441Separate Earthing For kiosk building and all other switchyard buildings, fencing etc. with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
442Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required complete with foundation bolts, fastners etc.
443400kV Columns
444400kV Beams
445220kV Columns
446220kV Beams
447Fire Alarm & Detection including all accessories as per specification
448Fire Alarm & Detection system for 400kV GIS Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc.
4495kg Portable and wheel/trolley mounted Fire Extinguishers for Switchyard
4505kg Portable Fire Extinguisher for 400kVGIS Hall
4515kg Portable Fire Extinguisher for Kiosk room
452Dry powder chemical type 10 kg. For 1 MVA transformer
453Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification.
454Hydrant system along with pumping arrangement & associated Civil works for fire protection system. Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (200 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe and Construction of Water reservior and Pump house for fire fighting. Construction of shed structure using Steel section by TATA of YST 310 Grade with RCC block as base. Shed roofing to be completed with PPGI sheet roofing with minimum 0.6 mm thickness. (Design and Drawing to be prepared by Contractor and shall be approved by AEGCL)
455HVWS system (automatic emulsifier and manual hydrant point both) for 500 MVA ICT-2 Nos. and 80MVAr Bus Reactor -2 nos and 80MVAr Line Recator - 2 nos.
456NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 500MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos.
457250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement.
458Lighting System
459Outdoor Lighting
460Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.
461Public Addressing System & CCTV complete with all accessories as per specification.
462Lightning protection system (LCLM 50 metres high)
4637/3.66mm GI shield wire
4643 meter, Lightning spike for lightning protection
465Erection, Testing and commissioning of Isolators
466Erection Testing and Commissioning of Isolators with all accessories, laying and termination of LT power & control cables, fitting fixing of clamps and jumpers etc. as required.
467245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with double earth switch.
468245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with one earth switch.
469245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
470245KV, 2000A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch
47172.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.
47272.5kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch.
473Erection of Isolator mounting structure including contsruction of foundation and supply of all foundation materials and labour
474245KV, Horizontal Double Breaktype Isolator with double earth switch.
475245KV, Horizontal Double Breaktype Isolator with one earth switch.
476245KV, Horizontal Double Breaktype Isolator without earth switch (Tandem type)
477245KV, Horizontal Double Breaktype Isolator without earth switch
47872.5kV, Horizontal Double Break type Isolator without earth switch.
47972.5kV, Horizontal Double Break type Isolator with earth switch.
480Hoisting and erection of hardware fittings complete set with nuts bolts, clamps and other accessories as required and stringing of Bus/conductor/jumpers as required.
481400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
482400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
483220kV, 2x120kN double tension string suitable for HTLS Zebra equivalent (1600A) conductor.
484220kV, 2x120kN double suspension string suitable for Twin ACSR Moose conductor.
485220kV, 2x160kN double tension string suitable for Twin ACSR Moose conductor.
486220kV, 2x210kN double suspension string suitable for Quad ACSR Moose conductor.
487220kV, 4x160kN double tension string suitable for Quad ACSR Moose conductor.
4884'' IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc as required.
489ACSR Moose Conductor as per site requirement
490ACSR Panther Conductor
491Clamps & Connectors as per requirement
492Erection and Testing Commissioning of Bus post insulator including support structures, clamp connectors,and other accessories as required.
493Erection, Testing & Commissioning of 1 phase Solid core bus post insulator including clamp connectors and other accessories as required.
494420KV, BPI
495245KV, BPI
49672.5KV, BPI
497Erection of BPI mounting structures including contsruction of foundation and supply of all foundation materials and labour
498420KV, BPI
499245KV, BPI
50072.5KV, BPI
501Erection Testing and Commissioning of Station Service Transformer, PRP (with structure, if applicable) and its accessories as below including laying and termination of LT power and control cables
502630 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.
503440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 1000KVA Station Service Transformer
504Erection Testing & Commissioning of Surge Arrester
505Erection, Testing & Commissioning of Surge Arrester alongwith erection of mounting structure, Including fitting and fixing of all accessories, clamps and connectors etc complete.
506398kV, 20kA, LA
507216KV, 10kA, LA
50860kV, 10kA, LA
509Erection of LA mounting structure including contsruction of foundation and supply of all foundation materials and labour
510398kV, 20kA, LA
511216KV, 10kA, LA
51260kV, 10kA, LA
513Erection Testing & Commissioning of CVT and Wave Trap
514Erection Testing & Commissioning of CVT and Wave Trap alongwith erection (for CVT), of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc.
515400kV, 8800pF, 3 Wdg CVT.
516220kV, 4400pF, 3 Wdg CVT.
517400KV, 3150A Wave Trap
518220KV, 1250A Wave Trap.
519Erection of CVT mounting structure including contsruction of foundation and supply of all foundation materials and labour
520400kV, 8800pF, 3 Wdg CVT.
521220kV, 4400pF, 3 Wdg CVT.
522Erection Testing & Commissioning of Circuit Breaker (Outdoor AIS) alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and connectors and including contsruction of foundation and supply of all foundation materials and labour complete.
523245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.
524245kV, 3-phase, Ganged Operated, 3150A, 50kA for 3 sec.
52572.5kV, 1250A, 40kA for 3 sec.
526Erection Testing & Commissioning of Bay Marshalling Kiosk alongwith structure including laying and termination of LT power and control cables, construction of foundation alongwith supply of all foundation materials and labour as required.
527400kV BMK
528220kV BMK
52933kV BMK
530Instrument Transformer (CT & PT) as per specification.
531Erection Testing & Commissioning of Instrument Transformer (CT & PT) alongwith erection of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc complete.
532220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
53372.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
534220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
53572.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
536Erection of Instrument Transformer (CT & PT) mounting structure including contsruction of foundation and supply of all foundation materials and labour
537220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT
53872.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 ph CT
539220kV, Potential Transformer (3 wdg, 0.2-3P-3P)
54072.5kV, Potential Transformer (3 wdg, 0.2-3P-3P)
541Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables
542400kV GIS
543400kV Bus Bar Protection Panel
544400kV Line CRP (Line differential)
545400/220kV ICT CRP (500MVA)
546400kV Bus Reactor CRP
547400kV Tie Breaker CRP
548245kV GIS
549245kV Bus Bar Protection Panel
550245kV Line CRP
551400/220kV ICT CRP (500MVA)
552245kV Bus Coupler CRP
55372.5kV AIS
554Station Service Transformer control & Protection Panel
555Erection Testing & Commissioning and installation of Complete Substation System Automation System (As per specification) including laying and termination of LT power and control cables
556Station HMI (Main, Redundant and Metering) with Industrial PC
557Maintenance HMI (DR Workstation) with Industrial PC
558Gate way with PLCC and Fibre Optic Modem and Panel
559SAS Inverter (5kVA)
560Colour MFP Laser Printer
561GPS Clock System
56216 port Bay Ethernet Switch
563All interphase equipment for Gateway to SLDC
564VDU 75 inch
565Aux BCUs as per scheme requirement alongwith panel
56624 port Station Ethernet Switch
567SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
568Red Box
569All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords, furnitures for HMIs and printers, cables etc. as per requirement
570Erection Testing & Commissioning of 400 kV GIS Modules and Equipment including laying and termination of LT power and control cables, installation of all accessories as required including construction of foundation and supply of all foundation materials and labour.
5713- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
5723- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation
5733- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
5743- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification
5753- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
576400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
577400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
57810 Ton EOT Crane for 400kV GIS Building
579Erection, testing and commissioning of 500MVA, 400/220kV, ONAN/ ONAF/ODAF, ICT and all accessories, terminal connectors as per technical specification including laying and termination of LT power, control cables and other signalling cables as required.
580500 MVA, 400/220/33 kV, Three phase Transformer with OLTC & Oil
581Oil & winding temperature monitoring system (FO based)
582Online DGA (Multi gas)
583Online insulating drying system
584Maintenance free breather
585RTCC Panel with AVR (TMS)
586Rail track for transformer
587Pulling block for transformer
58880 MVAR Bus Reactor (with Oil)
58980 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil
590Pulling block for reactor
591Battery & Battery Chargers, DCDB & ACDB as per specification
592220V VRLA Battery, 1500AH
593220V, Dual Float Cum Boost Chargers, 300A
594220V, DCDB
59548V VRLA type Battery Bank, 620AH
59648V, SMPS Dual Float cum Boost Chargers, 125A
59748V, DCDB
598Main ACDB
599Sub ACDB
600MLDB with 415V/415V, 125kVA isolation transformer
601ELDB with 415V/415V, 50kVA isolation transformer
602HVAC DB
603MCBDB
604Power Line Carrier Communication Equipments
605HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
606Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
607IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
608LMU and LMDU
609EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card.
610CAT 6 armoured cable.
6112 wire telephone set
612Armoured Audio Cable
613OPGW equipments as per specification
614Transmission Equipment & SDH Equipment -STM16(ADM- up to five Direction)
615Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 22.02 & 22.03 below.)
616Optical Interface/SFP for:
617S4.1 (Old Agia)
618Line Interface to support STM 4 upto 100km (220kV Chayygaon)
619Line Interface to support STM 4 upto 80km (220kV Boko)
620Line Interface to support STM 16 upto 60km (400kV Chapar)
621Line Interface to support STM 16 upto 200km (400kV Rangia)
622Tributary Cards
623E1 interface card (Minimum 63 interfaces per card)
624Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2 switching (Minimum 8 interfaces per card)
6258 Port VOIP for remote locations
626Analog Telephone( 2-wire telephone for VOIP Gateway location)
627IEEE C37.94 (4 interfaces) to E1 converter/interface for integration with SDH equipment
628Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom
629For SDH equipment(including DDF patching facilities and other accessories
630Main Distribution Frame(100 pairs)
631Craft Terminal
632Hardware (LAPTOP)
633Software
634Pre connectorized optical patch cords(Minium 8 patch cords per station)
635Firewall with deep inspection for IEC 104, IEC 61850 ,IEC 62443 certified with 5 years warranty
636Time synchronisation clock (MTCTE certified with multiband receiver) with all other accessories, cables etc.
637Installation & Testing of complete Earthing system as per technical specification.
638Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
63940 mm Dia MS Rod for Main Earthmat and Riser
64075X 12 Mm GS (HDG) Flat for equipment and structure earthing
64150X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
64250 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
64340Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
64450x6 mm GS Flat as per site requirement
645Soil Resistivity Test And Soil Treatment As And When Required
646Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) and 400kV GIS Building with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
647Separate Earthing For kiosk building and all other switchyard buildings, fencing etc. with earth electrodes, Copper & GS earthing conductors etc. complete with all respects
648Erection of Lattice structures for incoming and outgoing gantries etc. including contsruction of foundation and supply of all foundation materials, bolts, fastenrs etc. and labour
649400kV Columns
650400kV Beams
651220kV Columns
652220kV Beams
653Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. Also provide 300 mm boulder soiling below the foundation
654400kV Columns
655220kV Columns
656Fire Alarm & Detection including all accessories as per specification
657Fire Alarm & Detection system for 400kV GIS Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc.
658Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification.
659Hydrant system along with pumping arrangement & associated Civil works for fire protection system.
660HVWS system (automatic emulsifier and manual hydrant point both) for 500 MVA ICT-2 Nos. and 80MVAr Bus Reactor -2 nos and 80MVAr Line Recator - 2 nos.
661NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 500MVA ICT-2 No’s, 80MVAR Bus reactor-2 nos.
662250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement.
663Lighting System
664Outoor Lighting
665Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.
666Public Addressing System & CCTV complete with all accessories as per specification.
667Lightning protection system (LCLM 50 metres high alongwith foundation)
6687/3.66mm GI shield wire
6693 meter, Lightning spike for lightning protection
670Supply, Installation, Testing & Commissioning of HVAC & VENTILATION including laying and termination of LT power and control cables
671Supply and installation Industrial Grade AC with inverter technology, 5-Star rating of brands- Voltas/Bluestar/Carrier etc
672GIS building CRP room, battery charger room, battery room, office room etc.
673Kiosk Building (2 Tonne)
674Supply, installation, testing and commissioning of Pressurised Ventialtion system
675Supply and Installaton of Ventilation system for 400 kV GIS Building with Centrifugal fan and related accessories. It should comprise of Pre and Fine Air purifier, ducting network, air supply, grilles, gravity dampers, etc. for complete job
676400 /220 kV GIS at Agia
677Standards, Design and Drawing
678Site Clearance including necessary excavation
679Site Preparation and Earthfilling with Compaction
680Security Fencing
681Buildings (including All services i.e. electrical, internal water supply, sanitary works, sewage system, furnishing, internal cable trench complete with future provisions)
682400 KV GIS Building (PEB) alongwith GIS bay foundations complete on pile foundation (90m Length x 28m Width X 17.69 m Height)
683KIOSK Building on pile foundation (10 m x 6.5 m x 4.7 m)
684Counstruction of 500 MVA Power Transformer foundation with soak pit on pile foundation
685Construction of 80MVAR Bus Reactor foundation with soak Pit on pile foundation
686Common Burnt Oil Pit for 500MVA and 80MVAR transformers
687Fire Protection Wall in RCC frame with 230 mm brick wall including supply of all foundation materials and labour on pile foundation
688Fire Protection Wall for 500MVA Transformer
689Fire Protection Wall for 80MVAr Bus Reactor
690Water Supply work
691Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (200 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe, one unit RCC (M-25 grade) Slow Sand Filter (Capacity 10,000 Ltr/hr) along with RCC (M-25 grade) reservoir 600 mm above FGL (Capacity 35,000 Ltr) Supply and Installation of distribution network with CPVC pipe of 40 mm diameter and 25 mm diameter for connecting to Overhead tank of all buildings.
692Station Transformer foundation
693Counstruction of 630 KVA Station Service Transformer foundation
694Cable Trench along with road crossing culvert for cables wherever necesarry. (Switchyard, Kiosk room etc.) along with switchyard work
695A type
696B Type
697C Type
698D Type
699HDPE pipe of 150 mm dia
700Approach and Internal Road
701Antiweed treatment
702PCC in Switchyard
703Stone Spreading(Gravelling) in switchyard
704Storm Water Drain with RCC box culvert wherever necessary
705Design and construction of RCC box culvert for approach road
706Sump Pit with electric pump set
707Main Gate
708Switchyard Gate
709SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification.
710DD+6 with Auxiliary cross arm
711DD+18
712DD+25
713Special Anchor Tower
714Special Suspension Tower for Brahmaputra River Crossing
715Procurement of Danger plates.
716Procurement of Phase plates.(Set of Three)
717Procurement of Number plates.
718Procurement of anti climbing device
719Procurement of Circuit Plate
720ACSR Moose conductor
7217/3.66mm GI shield wire
722POWER CONDUCTOR ACCESSORIES
723Stock bridge type Vibration Damper
724Preformed Armoured Rods
725Mid Span Compression Joint for Conductor
726Repair Sleeve for Conductor
727Bundle Spacer suitable for Quad ACSR Moose
728Rigid Spacer for jumper suitable for Quad ACSR Moose
729Tower earthing Accessories
73050 mm dia, 3 mtr long GI pipe electrode (driven) with test link
73150x6 mm GS flat as required
732Other earthing accessories like GS steel wires, lugs etc
733FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables
73448 Fibre (DWSM) OPGW fibre optic cable (Steel tube)
73548 Fibre Optic Approach Cable (DWSM48F)
736OPGW HARDWARE/FITTINGS AND TERMINATIONS
737OPGW Suspension Assembly
738OPGW double tension pass through assembly
739OPGW Splicing Tension Assembly in Suspension tower
740OPGW Double Tension Assembly for splicing location
741OPGW Tension Single Dead-end Set
742OPGW Vibration Damper c/w pre-formed armour rods
743Down Lead Clamp
744Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
745Loop bracket
746Shield wire HARDWARE/FITTINGS AND TERMINATIONS
747Tension assembly
748Vibration Damper
749FODP 48F: Indoor Type, rack mounted with FCPC coupling and pig tails at Agia New
750Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
751Supply of following Aviation Requirements
752Span Markers
753Obstruction Lights (to be provided as per IS 5613)
7542 Medium Intensity + 2 Low Intensity
755Bird Diverters as per CEA
756Anti Fog Disc Insulator Stack
757Disc insulator suitable for Quad ACSR Moose 400 KV TL-210 KN
758Disc insulator suitable for Quad ACSR Moose (400 KV TL)-320 KN
759HARDWARE FITTINGS
760Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String 210x2 kN
761Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String (Pilot) 210x2 kN
762Hardware fittings suitable for Quad ACSR Moose Conductor-Double Tension String 160X4 kN
763SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification.
764DD+6 with Auxiliary cross arm
765DD+18
766DD+25
767Special Anchor Tower
768Special Suspension Tower for Brahmaputra River Crossing
769Procurement of Danger plates.
770Procurement of Phase plates.(Set of Three)
771Procurement of Number plates.
772Procurement of anti climbing device
773Procurement of Circuit Plate
774ACSR Moose conductor
7757/3.66mm GI shield wire
776POWER CONDUCTOR ACCESSORIES
777Stock bridge type Vibration Damper
778Preformed Armoured Rods
779Mid Span Compression Joint for Conductor
780Repair Sleeve for Conductor
781Bundle Spacer suitable for Quad ACSR Moose
782Rigid Spacer for jumper suitable for Quad ACSR Moose
783Tower earthing Accessories
78450 mm dia, 3 mtr long GI pipe electrode (driven) with test link
78550x6 mm GS flat as required
786Other earthing accessories like GS steel wires, lugs etc
787FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables
78848 Fibre (DWSM) OPGW fibre optic cable (Steel tube)
78948 Fibre Optic Approach Cable (DWSM48F)
790OPGW HARDWARE/FITTINGS AND TERMINATIONS
791OPGW Suspension Assembly
792OPGW double tension pass through assembly
793OPGW Splicing Tension Assembly in Suspension tower
794OPGW Double Tension Assembly for splicing location
795OPGW Tension Single Dead-end Set
796OPGW Vibration Damper c/w pre-formed armour rods
797Down Lead Clamp
798Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
799Loop bracket
800Shield wire HARDWARE/FITTINGS AND TERMINATIONS
801Tension assembly
802Vibration Damper
803FODP 48F: Indoor Type, rack mounted with FCPC coupling and pig tails at Agia New
804Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
805Supply of following Aviation Requirements
806Span Markers
807Obstruction Lights (to be provided as per IS 5613)
8082 Medium Intensity + 2 Low Intensity
809Bird Diverters as per CEA
810Anti Fog Disc Insulator Stack
811Disc insulator suitable for Quad ACSR Moose 400 KV TL-210 KN
812Disc insulator suitable for Quad ACSR Moose (400 KV TL)-320 KN
813HARDWARE FITTINGS
814Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String 210x2 kN
815Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String (Pilot) 210x2 kN
816Hardware fittings suitable for Quad ACSR Moose Conductor-Double Tension String 160X4 kN
817Erection of following type tested lattice type galvanised steel suspension/Angle tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts, Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc.
818DD+6 with Auxiliary cross arm
819DD+18
820DD+25
821Special Anchor Tower
822Special Suspension Tower for Brahmaputra River Crossing
823Setting of Stubs using adjustable probe
824Fitting of Danger plates.
825Fitting of Phase plates.(Set of Three)
826Fitting of Number plates.
827Fitting of anti climbing device
828Fitting of Circuit Plate
829Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (24 conductors for Double Circuit Line) of line.
830Grounding of towers (Pipe earthing / counterpoise earthing) with 3 metre long 50 mm dia G I pipe along with 50x6 mm GS flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.
831Painting of towers with bituminous paints of approved quality up to 5 metres from ground level including the cost of paints.
832Detailed Survey and Check Survey as per Specification alongwith Geotechnical investigation for Tower locations for 400 kV Chapor -Agia Line
833OPGW HARDWARE/FITTINGS AND TERMINATIONS
834Stringing of 96 Fibre (DWSM)OPGW Fibre Optic cable including transportation and distribution of OPGW and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line alongwith Installation of Hardware set for above 96 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, tension double end set for splice location, vibration dampers, earthing clamps, down lead clamps, in-line spice enclosures etc.
835Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
836Installation of FODP
837FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails
838Fibre Optic approach cable (DWSM 96F)
839Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
840Installation of 96 Fibre (DWSM) Fibre Optic approach cable
841Installation of Span Markers
842Installation of Obstruction Lights (to be provided as per IS 5613)
8432 Medium Intensity + 2 Low Intensity
844Installation Bird Diverters/guards
845Stringing of 7/3.66mm GI shield wire including transportation and distribution, and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line alongwith Installation of Hardware set including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, vibration dampers, earthing clamps etc.
846Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.
847For DA+3
848Dry type
849Wet Type
850Wet Type
851Partially Submerged Type
852Fully Submerged Type
853Wet Type
854Partially Submerged Type
855Wet Type
856Wet Type
857Partially Submerged Type
858Wet Type
859Partially Submerged Type
860Dry Type
861Partially Submerged Type
862Wet Type
863Wet Type
864Wet Type
865Partially Submerged Type
866Partially Submerged Type
867Dry Type
868Wet Type
869Wet Type
870Partially Submerged Type
871Dry Type
872Wet Type
873Partially Submerged Type
874Fully Submerged Type
875Dry Type
876Wet Type
877Partially Submerged Type
878DD+18
879Dry Type
880Wet Type
881Fully Submerged Type
882DD+25
883Partially Submerged Type
884Fully Submerged Type
885Providing Boulder Soling under foundation (minimum 300 mm thick) as per site condition
886Providing, driving with hydralic piling rigs with power unit and installing driven cast-in-situ reinforced cement concrete piles of grade M25 including the cost of reinforcement steel, cost of boring with temporary guide casting bentonite solution (length of the pile for payment shall be measured from the Ground Level). The pile top should be chipped off to remove laitance concrete above cut off level 0.75m from the top of the pile (no additional payment shall be done for latience concrete and its removal). The unit rate should include excavation, dewatering, socketing, anchoring (if required), backfilling, form work for placing plain or reinforced cement concrete, supply & providing MS liner of 8 mm thick (length of the liner shall be as per geotechnical report) in piles from the Ground Level, necessary labour, materials, plants, tools and tackles and mobilization of piling rig including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing.(Payment will be made as per actual length of the piles executed and rate shall be inclusive of integrity test on each pile)
8871500 mm diameter R.C.C vertical bored pile upto 30 m from ground level
8881200 mm diameter R.C.C vertical bored pile upto 30 m from ground level
889Providing & laying in position M25 Grade concrete of specified 28 days strength for Chimney, pile caps, pedestal and tie beam, including excavation and backfilling for all depth and size, in all types of soil including disposal of excavated materials for all lifts and leads, decent etc. and supply and placing of reinforcement steel and form work, all necessary tools and tackles, labour, materials, equipments for handling, transportation, batching, mixing, placing, vibrating, dewatering etc. all complete
890For DA+6
891For DA+9
892For DB+6
893For DC+6
894For DD+6
895For DD+9
896For DD+12
897For DD+25
898Design and construction of tower
899Design of D/C special suspension tower for river crossing with Quad ACSR MOOSE conductor, 48 F (steel tube design) OPGW and sheild wire (7/3.66 mm ) alongwith well foundation for D/C special suspension tower for river crossing including geotechnical investigation, hydrological and hydraulic study of the river, determination of HFL and vetting for complete job alongwithDesign of D/C Anchor tower with Quad ACSR MOOSE conductor and 48 F (steel tube design) OPGW and sheild wire (7/3.66 mm ) alongwith foundation for D/C Anchor tower (Design and vetting)
900Construction of foundation for D/C Anchor tower as per design
901Construction of Well foundation for Special Suspension Tower
902Supplying , fabricating and fixing in position mild steel cutting edge with MS anchorages for well foundations including welding, splicing and making provisions for the fixing of reinforcements of well curb as per approved drawing and Technical Specification Sections 1200 & 1900
903Cement concrete /Reinforced cement concrete complete excluding reinforcement as per drawing and Technical Specification Clauses 1200,1500 and 1700
904Well Curb
905Bottom plug
906Well steining
907Intermediate Plug
908Well Cap & Beam
909Supplying, fixing and placing TMT/HYSD bar Specification Section 1600
910Sinking of wells through all types of strata and applicable methods for all water depth below existing water level with caision of approved design complete as per Technical Specifications and as directed by the Engineer
91114.0 m Circular Well
912Depth 0.00m to 10.00m
913Depth 10.00m to 20.00m
914Depth 20.00m to 30.00m
915Depth 30.00m to 40.00m
916Depth 40.00m and beyond
917Sand filling in wells complete as per drawings and Technical Specifications Clause 1209
918Water filling in wells complete as per drawings and Technical Specifications Clause 1209
919SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification.
920DD+0 with Auxiliary Cross Arm
921DD+18
922DD+25
923Transposition Tower
924400kV Line crossing gantry
925Procurement of Danger plates.
926Procurement of Phase plates.(Set of Three)
927Procurement of Number plates.
928Procurement of anti climbing device
929Procurement of Circuit Plate
930ACSR Moose conductor
931POWER CONDUCTOR ACCESSORIES
932Stock bridge type Vibration Damper
933Preformed Armoured Rods
934Mid Span Compression Joint for Conductor (542 towers)
935Repair Sleeve for Conductor
936Bundle Spacer suitable for Quad ACSR Moose
937Rigid Spacer for jumper suitable for Quad ACSR Moose
938Tower earthing Accessories
93950 mm dia, 3 mtr long GI pipe electrode (driven) with test link
94050x6 mm GS flat as required
9417/3.66mm GI sheild wire
942FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables
94348 Fibre (DWSM) OPGW fibre optic cable
94448 Fibre Optic Approach Cable (DWSM96F)
945OPGW HARDWARE/FITTINGS AND TERMINATIONS
946OPGW Suspension Assembly
947OPGW double tension pass through assembly
948OPGW Splicing Tension Assembly in Suspension tower
949OPGW Double Tension Assembly for splicing location clamps
950OPGW Tension Single Dead-end Set for termination
951OPGW Vibration Damper c/w pre-formed armour rods
952Down Lead Clamp
953Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
954Loop bracket
955Shield wire HARDWARE/FITTINGS AND TERMINATIONS
956Tension assembly
957Vibration Damper
958FODP 48F: Indoor Type, rack mounted with FCPC coupling and pig tails at Rangia end
959Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
960Supply of following Aviation Requirements
961Span Markers
962Obstruction Lights (to be provided as per IS 5613)
9632 Medium Intensity + 2 Low Intensity
964Bird Diverters as per CEA
965INSULATOR (31mm /kV)
966Disc insulator suitable for Quad ACSR Moose 400 KV TL-210 KN
967Disc insulator suitable for Quad ACSR Moose (400 KV TL)-160 KN
968HARDWARE FITTINGS
969Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String 210x2 kN
970Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String (Pilot) 210x2 kN
971Hardware fittings suitable for Quad ACSR Moose Conductor-Double Tension String 160X4 kN
972SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification.
973DD+0 with Auxiliary Cross Arm
974DD+18
975DD+25
976Transposition Tower
977400kV Line crossing gantry
978Procurement of Danger plates.
979Procurement of Phase plates.(Set of Three)
980Procurement of Number plates.
981Procurement of anti climbing device
982Procurement of Circuit Plate
983ACSR Moose conductor
984POWER CONDUCTOR ACCESSORIES
985Stock bridge type Vibration Damper
986Preformed Armoured Rods
987Mid Span Compression Joint for Conductor (542 towers)
988Repair Sleeve for Conductor
989Bundle Spacer suitable for Quad ACSR Moose
990Rigid Spacer for jumper suitable for Quad ACSR Moose
991Tower earthing Accessories
99250 mm dia, 3 mtr long GI pipe electrode (driven) with test link
99350x6 mm GS flat as required
9947/3.66mm GI sheild wire
995FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables
99648 Fibre (DWSM) OPGW fibre optic cable
99748 Fibre Optic Approach Cable (DWSM96F)
998OPGW HARDWARE/FITTINGS AND TERMINATIONS
999OPGW Suspension Assembly
1000OPGW double tension pass through assembly
1001OPGW Splicing Tension Assembly in Suspension tower
1002OPGW Double Tension Assembly for splicing location clamps
1003OPGW Tension Single Dead-end Set for termination
1004OPGW Vibration Damper c/w pre-formed armour rods
1005Down Lead Clamp
1006Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
1007Loop bracket
1008Shield wire HARDWARE/FITTINGS AND TERMINATIONS
1009Tension assembly
1010Vibration Damper
1011FODP 48F: Indoor Type, rack mounted with FCPC coupling and pig tails at Rangia end
1012Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
1013Supply of following Aviation Requirements
1014Span Markers
1015Obstruction Lights (to be provided as per IS 5613)
10162 Medium Intensity + 2 Low Intensity
1017Bird Diverters as per CEA
1018INSULATOR (31mm /kV)
1019Disc insulator suitable for Quad ACSR Moose 400 KV TL-210 KN
1020Disc insulator suitable for Quad ACSR Moose (400 KV TL)-160 KN
1021HARDWARE FITTINGS
1022Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String 210x2 kN
1023Hardware fittings for Quad ACSR Moose Conductor-Double Suspension String (Pilot) 210x2 kN
1024Hardware fittings suitable for Quad ACSR Moose Conductor-Double Tension String 160X4 kN
1025Erection of following type tested lattice type galvanised steel suspension/Angle tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts including Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc.
1026DD+0 with Auxiliary Cross Arm
1027DD+18
1028DD+25
1029Transposition Tower
1030400kV Line crossing gantry
1031Setting of Stubs using adjustable probe
1032Fitting of Danger plates.
1033Fitting of Phase plates.(Set of Three)
1034Fitting of Number plates.
1035Fitting of anti climbing device
1036Fitting of Circuit Plate
1037Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km (6 conductors for Double Circuit Line) of line.
1038Grounding of towers (Pipe earthing / counterpoise earthing) with 3 metre long 50 mm dia G I pipe along with 50x6 mm GS flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.
1039Painting of towers with bituminous paints of approved quality up to 5 metres from ground level including the cost of paints.
1040Detailed Survey and Check Survey as per Specification alongwith Geotechnical investigation for Tower locations for 400 kV Chapor - Rangia Line
1041OPGW HARDWARE/FITTINGS AND TERMINATIONS
1042Stringing of 96 Fibre (DWSM)OPGW Fibre Optic cable including transportation and distribution of OPGW and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line alongwith Installation of Hardware set for above 96 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, tension double end set for splice location, vibration dampers, earthing clamps, down lead clamps, in-line spice enclosures etc.
1043Metallic joint box suitable for 48F OPGW alongwith splice kit for line and sub interface
1044Installation of FODP
1045FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails
1046Fibre Optic approach cable (DWSM 96F)
1047Installation hardware set for above 48 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.
1048Installation of 96 Fibre (DWSM) Fibre Optic approach cable
1049Installation of Span Markers
1050Installation of Obstruction Lights (to be provided as per IS 5613)
10512 Medium Intensity + 2 Low Intensity
1052Installation Bird Diverters/guards
1053Stringing of 7/3.66mm GI shield wire including transportation and distribution, and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line alongwith Installation of Hardware set including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, vibration dampers, earthing clamps etc.
1054Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.Also provide 300 mm thick boulder soiling below foundation
1055For DA+0
1056Dry type
1057Wet type
1058Partially Submerged Type
1059Fully Submerged Type
1060For DA+3
1061Dry type
1062Wet type
1063Partially Submerged Type
1064Fully Submerged Type
1065Dry type
1066Wet type
1067Partially Submerged Type
1068Fully Submerged Type
1069Wet Type
1070For DB+0
1071Dry type
1072Wet type
1073Partially Submerged Type
1074Fully Submerged Type
1075For DB+3
1076Dry type
1077Wet type
1078Fully Submerged Type
1079For DB+6
1080Dry type
1081Wet type
1082For DB+9
1083Partially Submerged Type
1084For DC+0
1085Dry type
1086Wet type
1087Partially Submerged Type
1088Fully Submerged Type
1089For DC+3
1090Dry type
1091Wet type
1092Partially Submerged Type
1093Fully Submerged Type
1094For DC+6
1095Wet type
1096For DC+9
1097Dry Type
1098For DD+0
1099Dry Type
1100Wet type
1101Partially Submerged Type
1102Fully Submerged Type
1103For DD+3
1104Dry Type
1105Wet type
1106Partially Submerged Type
1107Fully Submerged Type
1108For DD+6
1109Dry Type
1110Wet type
1111Partially Submerged Type
1112Fully Submerged Type
1113For DD+9
1114Dry Type
1115Wet type
1116Partially Submerged Type
1117For DD+18
1118Wet type
1119Partially Submerged Type
1120Fully Submerged Type
1121For DD+25
1122Dry Type
1123Wet type
1124Partially Submerged Type
1125Fully Submerged Type
1126Transposition tower
1127Fully Submerged Type
1128Line gantry
1129In Wet soil
1130In partially submerged soil
1131Providing Boulder Soling under foundation (minimum 300 mm thick) as per site condition
1132Providing, driving with hydralic piling rigs with power unit and installing driven cast-in-situ reinforced cement concrete piles of grade M25 including the cost of reinforcement steel, cost of boring with temporary guide casting bentonite solution (length of the pile for payment shall be measured from the Ground Level). The pile top should be chipped off to remove laitance concrete above cut off level 0.75m from the top of the pile (no additional payment shall be done for latience concrete and its removal). The unit rate should include excavation, dewatering, socketing, anchoring (if required), backfilling, form work for placing plain or reinforced cement concrete, supply & providing MS liner of 8 mm thick (length of the liner shall be as per geotechnical report) in piles from the Ground Level, necessary labour, materials, plants, tools and tackles and mobilization of piling rig including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing.(Payment will be made as per actual length of the piles executed and rate shall be inclusive of integrity test on each pile)
11331500 mm diameter R.C.C vertical bored pile upto 30 m from ground level
11341200 mm diameter R.C.C vertical bored pile upto 30 m from ground level
1135Providing & laying in position M25 Grade concrete of specified 28 days strength for Chimney, pile caps, pedestal and tie beam, including excavation and backfilling for all depth and size, in all types of soil including disposal of excavated materials for all lifts and leads, decent etc. and supply and placing of reinforcement steel and form work, all necessary tools and tackles, labour, materials, equipments for handling, transportation, batching, mixing, placing, vibrating, dewatering etc. all complete
1136For DA+0
1137For DD+0
1138For DD+3
1139For DD+6
1140For DD+9
1141For DD+18
1142For DD+25
1143Design of D/C Line Gantry with foundation for Quad ACSR MOOSE conductor and 48 F (steel tube design) OPGW and sheild wire (7/3.66 mm )
1144Supply of insulator string assembly with antifog disc insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.
1145400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
1146400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
1147Conductors, Clamp Connectors
1148ACSR Moose Conductor as per site requirement
1149Clamps & Connectors as per requirement
1150Bus post insulator as per specification.
1151Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.
1152420KV, BPI
1153Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.
1154420KV, BPI
1155Surge Arrester as per spefication
1156Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.
1157398kV, 20kA, LA
1158Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.
1159398kV, 20kA, LA
1160CVT and Wave Trap as per specification.
1161Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.
1162400kV, 8800pF, 3 Wdg CVT.
1163400KV, 3150A Wave Trap
1164Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.
1165400kV, 8800pF, 3 Wdg CVT.
1166Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required
1167400kV BMK
1168Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.
1169400kV GIS
1170400kV Line CRP (Line differential)
1171400kV Tie Breaker CRP
1172Complete Substation System Automation System (As per specification )
1173SAS Integration of 2 no New Bays with the existing SAS as per Scope of Works including supply of all accessories, LIU, ethernet switches, etc. for succesfull commissioning
1174SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
1175400 kV GIS Equipment (As per specification)
11763- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
11773- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
11783- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Adapter Module for inegration of the new bays with the exiusting GIS alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
1179400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
1180400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
1181Power Line Carrier Communication Equipments
1182HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
1183Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
1184IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
1185LMU and LMDU
1186CAT 6 armoured cable.
11872 wire telephone set
1188Armoured Audio Cable
1189LT Control Cable (1.1kV grade PVC copper)
11904C x 2.5 sqmm
11915C x 2.5 sqmm
11927C x 2.5 sqmm
119310C x 2.5 sqmm
119414C x 2.5 sqmm
119519C x 2.5 sqmm
11964P x 0.5 sqmm
1197LT Power Cable (1.1kV grade XLPE copper)
11984C x 16 sqmm
11994C x 4 sqmm
12002C x 6 sqmm
1201Earthing
1202Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
120340 mm Dia MS Rod for Riser
120475X 12 Mm GS (HDG) Flat for equipment and structure earthing
120550X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
120650 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
120740Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
120850x6 mm GS Flat as per site requirement
1209Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat)
1210Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required.
1211400kV Columns
1212400kV Beams
1213Lighting System
1214Outoor Lighting
1215Outdoor LED lighting for two line bays
1216Supply of insulator string assembly with antifog disc insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.
1217400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
1218400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
1219Conductors, Clamp Connectors
1220ACSR Moose Conductor as per site requirement
1221Clamps & Connectors as per requirement
1222Bus post insulator as per specification.
1223Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.
1224420KV, BPI
1225Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.
1226420KV, BPI
1227Surge Arrester as per spefication
1228Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.
1229398kV, 20kA, LA
1230Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.
1231398kV, 20kA, LA
1232CVT and Wave Trap as per specification.
1233Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.
1234400kV, 8800pF, 3 Wdg CVT.
1235400KV, 3150A Wave Trap
1236Supply of CVT pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.
1237400kV, 8800pF, 3 Wdg CVT.
1238Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required
1239400kV BMK
1240Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.
1241400kV GIS
1242400kV Line CRP (Line differential)
1243400kV Tie Breaker CRP
1244Complete Substation System Automation System (As per specification )
1245SAS Integration of 2 no New Bays with the existing SAS as per Scope of Works including supply of all accessories, LIU, ethernet switches, etc. for succesfull commissioning
1246SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
1247400 kV GIS Equipment (As per specification)
12483- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
12493- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
12503- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Adapter Module for inegration of the new bays with the exiusting GIS alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
1251400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
1252400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
1253Power Line Carrier Communication Equipments
1254HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
1255Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
1256IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
1257LMU and LMDU
1258CAT 6 armoured cable.
12592 wire telephone set
1260Armoured Audio Cable
1261LT Control Cable (1.1kV grade PVC copper)
12624C x 2.5 sqmm
12635C x 2.5 sqmm
12647C x 2.5 sqmm
126510C x 2.5 sqmm
126614C x 2.5 sqmm
126719C x 2.5 sqmm
12684P x 0.5 sqmm
1269LT Power Cable (1.1kV grade XLPE copper)
12704C x 16 sqmm
12714C x 4 sqmm
12722C x 6 sqmm
1273Earthing
1274Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
127540 mm Dia MS Rod for Riser
127675X 12 Mm GS (HDG) Flat for equipment and structure earthing
127750X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
127850 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
127940Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
128050x6 mm GS Flat as per site requirement
1281Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat)
1282Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc as required.
1283400kV Columns
1284400kV Beams
1285Lighting System
1286Outoor Lighting
1287Outdoor LED lighting for two line bays
1288Hoisting and erection of hardware fittings complete set with nuts bolts, clamps and other accessories as required and stringing of Bus/conductor/jumpers as required.
1289400kV, 4x160kN double tension string suitable for Quad ACSR Moose conductors
1290400kV, 2x210kN double Suspension string suitable for Quad ACSR Moose conductors
1291ACSR Moose Conductor as per site requirement
1292Clamps & Connectors as per requirement
1293Erection and Testing Commissioning of Bus post insulator including support structures, clamp connectors,and other accessories as required.
1294Erection, Testing & Commissioning of 1 phase Solid core bus post insulator including clamp connectors and other accessories as required.
1295420KV, BPI
1296Erection of BPI mounting structures including contsruction of foundation and supply of all foundation materials and labour
1297420KV, BPI
1298Erection Testing & Commissioning of Surge Arrester
1299Erection, Testing & Commissioning of Surge Arrester alongwith erection of mounting structure, Including fitting and fixing of all accessories, clamps and connectors etc complete.
1300398kV, 20kA, LA
1301Erection of LA mounting structure including contsruction of foundation and supply of all foundation materials and labour
1302398kV, 20kA, LA
1303Erection Testing & Commissioning of CVT and Wave Trap
1304Erection Testing & Commissioning of CVT and Wave Trap alongwith erection (for CVT), of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc.
1305400kV, 8800pF, 3 Wdg CVT.
1306400KV, 3150A Wave Trap
1307Erection of CVT mounting structure including contsruction of foundation and supply of all foundation materials and labour
1308400kV, 8800pF, 3 Wdg CVT.
1309Erection Testing & Commissioning of Bay Marshalling Kiosk alongwith structure including laying and termination of LT power and control cables, construction of foundation alongwith supply of all foundation materials and labour as required.
1310400kV BMK
1311Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables
1312400kV GIS
1313400kV Line CRP (Line differential)
1314400kV Tie Breaker CRP
1315Erection Testing & Commissioning and installation of Complete Substation System Automation System (As per specification) including laying and termination of LT power and control cables
1316SAS Integration of 3 no New Bays with the existing SAS as per Scope of Works including supply of all accessories, LIU, ethernet switches, etc. for succesfull commissioning
1317SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.
1318Erection Testing & Commissioning of 400 kV GIS Modules and Equipment including laying and termination of LT power and control cables, installation of all accessories as required including construction of foundation and supply of all foundation materials and labour.
13193- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification
13203- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification.
13213- Ø 400 kV, 5000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Adapter Module for inegration of the new bays with the exiusting GIS alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement.
1322400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors and overhead lines.
1323400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays and bus reactor bays as per site requirement. (for both indoor and outdoor of GIS)
1324Erection, Testing & Commissioning of Power Line Carrier Communication Equipments including laying and termination of LT power and control cables
1325HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)
1326Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 100 km) for 400kV
1327IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 100 km(400kV)
1328LMU and LMDU
1329CAT 6 armoured cable.
13302 wire telephone set
1331Armoured Audio Cable
1332Installation & Testing of complete Earthing system as per technical specification.
1333Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc.
133440 mm Dia MS Rod for Riser
133575X 12 Mm GS (HDG) Flat for equipment and structure earthing
133650X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches
133750 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.
133840Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.
133950x6 mm GS Flat as per site requirement
1340Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat)
1341Separate Earthing For 220 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat)
1342Erection of Lattice structures for incoming and outgoing gantries etc. including contsruction of foundation and supply of all foundation materials, boltas, fastners etc. and labour
1343400kV Columns
1344400kV Beams
1345Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel. Also provide 300 mm boulder soiling below the foundation
1346400kV Columns
1347Erection and Testing & Commissioning of Lighting System including laying and termination of illumination cables
1348Outoor Lighting
1349Outdoor LED lighting for two line bays and 1 trafo bay Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57301764
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 03-10-2026
Authority
Authority Name Assam Electricity Grid Corporation Limited
Work Description Tender for Implementation Of Transmission Infrastructure To Evacuate 3200 Mw Thermal Power From Upcoming Generation Station At Chapar
Basic Detail
Tender No AEGCL/MD/Tech-1219/Chapar/2026
Bidding Type Tender
Location
City Dhubri
State Assam
Key Dates
Publish Date 02 Sep 2026
Submission Date 03 Oct 2026
Open Date 05 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee 5000
EMD 24 Crore
Exemption Available
Document List
63799c69-b057-4bed-a7eb-73ee652ec6f9.html
Additonal_Documents.rar
Bid_Volume_I.pdf
Bid_Volume_II.pdf
BOQ_84456.xls
IFB.pdf
Tendernotice_1 (22).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Oct 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 22 days

Tender Documents

Download All (ZIP) ↓
html

63799c69-b057-4bed-a7eb-73ee652ec6f9.html

rar

Additonal_Documents.rar

pdf

Bid_Volume_I.pdf

pdf

Bid_Volume_II.pdf

xls

BOQ_84456.xls

pdf

IFB.pdf

pdf

Tendernotice_1 (22).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders