Tender For Repair And Renovation Work Of The Existing Hospital Building At Chc, Jujumura Under Ama Hospital (Phase-Ii) Scheme For The Year 2025-26.
Tender Value
2.81 Crore
Estimated cost
Bid Submission
17 Sep 2026
4 days left
EMD
2.81 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sambalpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Work Of The Existing Hospital Building At Chc, Jujumura Under Ama Hospital (Phase-Ii) Scheme For The Year 2025-26.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning & grubbing road land including uprooting rankvegetation,grass ,bushes, shurbes,sapling and trees girth upto 300mm ,removal of stumps of trees cut earier and disposal of unsevicable materials and stacking of servicable materials to be used or auctioned up to lead of 1000 meters including removal and disposal of top organic soil not exceeding 150mm thickness. |
| 2 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead. |
| 3 | Scraping old paint with scrapers, sand papering andwashing with soap water or soda including scaffolding charges upto 5M height |
| 4 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris within 50m lead. |
| 5 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and rmoving the debris with in 50. m Lead etc complete. |
| 6 | Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead |
| 7 | Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead |
| 8 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 9 | Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 10 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m |
| 11 | Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead |
| 12 | Earth work in all kinds of soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete. |
| 13 | Up to (1.5m to 2m depth) |
| 14 | Filling in foundation, trenches and plinth with river sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradient including cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour, sundries, T & P etc. All complete as per directions of the Engineer in charge. |
| 15 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the direction of the Engineer in charge. |
| 16 | Cement concrete of proportion (1:2:4) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6\\") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer in charge. |
| 17 | Supplying diluting and preparing chemical emulsion like imidacloprid 30.5% SC or other chemicals approved by central insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as per constructional Anti termite Treatment confirming to IS 6313 (PART II) and creating a chemical barrier under and around the column pits, wall tranches, basement excavation top surface of plinth filling juction of wall and floors along with external perimeter of the building expansion joints. surrounding the pipes and conduits etc. at the rate of 7.5liter per sqm on vertical surface and 5.0 liter per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials. cost of all labour, conveyance, loading, unloading, T&P, Etc. all complete as per the direction of Engineer in Charge. |
| 18 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer In Charge. |
| 19 | Providing, lifting, hoisting and laying Reinforced cement concrete of M 25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries,Building Proper (Foundation and plinth) |
| 20 | Column / Pedestal |
| 21 | Plinth Beam |
| 22 | Roof beam |
| 23 | Lintel |
| 24 | Roof Slab |
| 25 | First FloorColumn |
| 26 | Roof Beam |
| 27 | Roof Slab |
| 28 | Providing, lifting, hoisting and laying Reinforced cement concrete of M 20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries,Building Proper (Foundation and plinth)Foundation and plinth |
| 29 | Column |
| 30 | Plinth beam |
| 31 | Column |
| 32 | Lintel for openings |
| 33 | Chhaja |
| 34 | Roof beam |
| 35 | roof slab |
| 36 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe 415 / Fe 500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approved drawing and technical specification and as per clause 1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer in Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe 415 / Fe 500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)Ground floor |
| 37 | First Floor |
| 38 | Fly Ash brick masonry in cement mortar (1:6) in Foundation structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer in Charge. |
| 39 | Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer in Charge.Ground Floor |
| 40 | First Floor |
| 41 | Providing Fly ash bricks masonry work using (230mmx115mmx80mm size) having crushing strength not less than 75Kg/Sqcm in cement mortar (1:4). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes & royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer in charge .Ground Floor |
| 42 | First Floor |
| 43 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor |
| 44 | First Floor |
| 45 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. Ground Floor |
| 46 | First Floor |
| 47 | Second Floor |
| 48 | Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 49 | First Floor |
| 50 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 51 | First Floor |
| 52 | Providing and laying vitrified tiles 600mmx1200mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).DAR 2023 Vol.I ,Cl 11.47.3 Pg.835 |
| 53 | Providing and laying vitrified tiles 600mmx600mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).DAR 2023 Vol.I ,Cl 11.47.4 Pg.835 |
| 54 | Providing, fitting, fixing Double charge vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain (Ivory) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) as directed by Engineer in charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects. |
| 55 | Providing full body matt finish vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 600x600 (shade to be decided as per Ama Hospital scheme) (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer in charge. |
| 56 | Supplying, fitting & fixing of Industrial vitrified tiles (30x30)cm in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer in charge . |
| 57 | Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer in Charge. |
| 58 | Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in Dados, treads of steps and landing on 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer in Charge. |
| 59 | Grouting the joints of flooring vitrified tiles 600mmx1200mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer incharge.(DAR 2023 Vol 1 Clause No 11.48.3(pg 836)) |
| 60 | Grouting the joints of flooring vitrified tile 600x600mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resinper kg), including filling / grouting and finishing complete as per direction of Engineer incharge.(DAR 2023 Vol 1 Clause No 11.48.2(pg 836)) |
| 61 | Providing and Fixing of wall paper of aesthetic design and good quality etc. including cost of all labour, T&P, lead etc. complete as per direction of Engineer in Charge. |
| 62 | Providing & Fixing of Louvers panelling made out of 19mm thick BWP plywood with 2\\" batten as support in Horizontal and Vertical Member Placed @ 600 mm C/C and 12mm thick wpc Louvers sheet , All exposed edges should be covered with 1mm thick decorate laminate, including cost of all materials, Labour T&P etc as per direction of Engineer In Charge. (Louvers Panel sould be pre approved by Engineer In Charge) |
| 63 | Polyurethene(PU) Coating of 1.5mm thick Provinding & applying the surface with primer & Providing two coats of liquid applied, solvent free elastomeric waterproofing membrane, shall be made of hydrocarbon free polyurethane with at least 85% solid content Nitoproof 600PF with necessary surface preparation, coving, primer etc. The waterproofing membrane shall be terminated on the top of parapet walls. including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. (Primer : Fosroc Nitoproof WB / Myk FloArm primer PU/ Sika Sikalastic PU Primer, Polyurethene : Fosroc Nitoproof 600 PF / Myk AquaArm WPU 1K(E) / Sika Sika guard 7600 VG) |
| 64 | Providing fitting and fixing of false ceilings with Aluminium anodised T Section No. 3215 with 2' 0\\" center to center, L section No. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 6' 0\\"x4' 0\\" with Gypsum board suspended from ceiling etc complete |
| 65 | Supplying and fixing of Roman blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 1 mm thick fabric with lining of approved design and quality etc. complete. |
| 66 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window / Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer In Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 125mm (DSR Cl. 26.86.6) |
| 67 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. completeSOR 2022 P 234 Sl No 8 |
| 68 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi chambered frame with in built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer in Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (DAR 2021 vol I Clause No 9.147.D, pg no.516 )Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). (DAR 2021 vol I Clause No 9.147D.4, pg no.518) |
| 69 | Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride)(Make: Fenstech) Ventilator made out of hollow chambered UPVC Sections having isolated drainage and reinforced throughout with galvanized steel. The ventilator shall be made out of UPVC sections having an overall size of 60mm x 60mm thickness. Structurally Reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm with locking system. Prefabricated & welded through fusion welding the window outer frame & sash shall be fitted with 5mm thickness Pin Head glass of reputed brand (Saint Gobain Glass), weathering sealant & Accessories like louvers made by brand. The outer frame is to be installed at the side using anchor fastener, Silicon Rubber Sealant. At least 15 years manufacturing warranty for discoloration, wrapping, mechanical failures, Shrinkages, Rooting Corrosion etc. with a quality Certificate from relevant departments of that government through the Dealers including of all materials and abounds etc. Complete as per directions of Engineer in charge. |
| 70 | Providing and supplying centre table with an overall size 900mm X 900mm X 410mm. The top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. The MDF top should have decorative finish with approved veneer and PU polish accordingly. The understructure shall consist of 4 nos. of MS sheet gold leg with 6mm thick. Make Godrej/featherlite/Geeken/wipro or equivalent |
| 71 | Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have ACTICE BIO SYNCHRO mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class 3 gas lift to suit them using the lever under the seat. The gas lift mechanism should be tested as per ANSI/BIFMA X5.1 2011 standards. The Pedestal should have five legged made of die cast aluminium having pitch circle dia.. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1 2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1150±10 mm. Make Godrej/featherlite/Geeken/wipro |
| 72 | Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have ACTICE BIO SYNCHRO mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class 3 gas lift to suit them using the lever under the seat. The gas lift mechanism should be tested as per ANSI/BIFMA X5.1 2011 standards. The Pedestal should have five legged made of die cast aluminium having pitch circle dia.. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1 2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1050±10 mm. Make Godrej/featherlite/Geeken/wipro |
| 73 | Wardrobe 4'WX 7'HX 1'10\\"DProviding and Fixing slidding door Wardrobe of size 4'LX 7'HX 1'10\\"D with 18 mm thick BWP ply of Make Marino/ Century /Archidply etc, Top, bottom,side panels and Shelve are to be made up of 18mm BWP Ply and back support with 12mm thick BWP ply with all inner side 0.6 mm white laminates and outer side 1 mm decorative laminate (Textured) make Marino/ Century /Archidply . The Door to be made up 18 mm thick block board of make Marino/ Century /Archidply with necessary slidding arrangements make Hettich/Hafele and concelaed handle. One drawer of size 1'6\\"(W) x 7'(H) x 1'10\\"(D) should be provided made of 18mm thick prelam BWP ply with decorative laminate (Texture), soft close channels, concealed handle etc. Aluminum hanger rod of 25mm dia with brackets, All exposed edges to be sealed with 1mm thick PVC edge banding including all cost of materials, T&P, all labour etc complete as per the Direction of Engineer in charge. |
| 74 | Supply & installation of wall paneling of Anutone slats surco high density fiberboard made out of pure pinewood particles, Fr Grade Pure Pinewood Particle core with test BS 476 part 5, Melamine laminated finish, perforated wooden grooved HDF slats L16 2 (2 mm grooves @ 8 mm centers), tongue groove edge for a seamless look of lineal dimension size 128 mm x 2440 mm x 16 mm thick having density 700 Kg /m3, weight 9 Kgs/m2 ,2mm Front Side Sound Abstroctor &1076 Distractor Hole nonwoven acoustic to be pasted on slats surco is to be installed by using GI strut system. The technical parameters are as follows Core Variants Fiberboard, Climate (OC RH) 50, 70 Light reflectance 75%,Green (RC %) 25, Hygiene (VoC, Clean room) Low, Class 1, NRC 0.85,Strength, Load capacity (Kg) Anti sag, Ball Impact. The concealed wall paneling system shall include GI Wall channel (WC25) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then fixed Main channels (MC45) having thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with GI cross channel(CC25) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. The framework will maintain 50 / 75 mm gap from the walls. Now clad the wooden Anatone slats surco on the CC 18 with the help of center & edge clips to get better locking of slats. The tongue & groove are to be properly aligned to get flush look . Synth Anuton poly fiber PF 5 x 50 wool of 500 gsm to be filled between the horizontal & vertical studs as in filler with the help of wire / stick 7 adhesive. Test certificate of the use products shall be submitted after procurement of materials. |
| 75 | Supply & installation of Anutone pinewood wool magnesia bonded soak fabric cord binary / Triangle design of selected colours (ref colour chart ) kerfs edge fabric wrapped ,pinewood fibers panels of size 600 X 600/ 1200 x 25 mm having density 400 Kg /m3 weight 10 Kg / mt 2 installed by using GI strut system. The GI strut works includes cross channels CC50 having thickness 0.45 mm , length 3600 knurled web 50, depth 50 mm & base 100 mm equal flanges of 13 mm is fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC vinyl core UV treated H spline having thickness 2 mm & length 2400 mm to be fixed or using Z bar or H spline on the back or edge of panels / tiles & similar on the back of channels perpendicular to the cross channels CC50 at 600mm centers. Kerfed edge fabric wrapped factory panels shall be then inserting into the H spline against wall to perfect fit. Panels shall be back lined with acoustical infill of anutone Synth PF 5 x 50 mm thick adhered to the wall using stick 7 adhesive. The technical parameters are as follows: core variant pinewood fibers. Fire class 1 & P Acoustic NRC 20 mm C10 0.85, Climate OCRH 50,90 Termite resistance yes light reflectance colour dependent, Green RC% 10, Hygiene ( Voc, Clean Room ) Low, Strength, Load Capacity ( Kg ) Ball impact. Test certificate of the use products shall be submitted after procurement of materials. |
| 76 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete. |
| 77 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4) 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main T runners of size 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid |
| 78 | Providing and Fixing of conference hall table with 19mm thick BWR ply board and 6mm thick Corian sheet of make Marino/Century ply/Greenply etc. including cost of all labour, T&P, lead etc. complete as per direction of Engineer in Charge. |
| 79 | Providing and laying in position 14 mm thick Engineered Hardwood Flooring of Squarefoot make of size 14*215*2200 mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top Layer is of genuine hardwood surface, the middle layer is of pine or spruce ribs laid transversely and the third layer is stabilizing bottom layer. The Floor is finished on top with seven course of UV curved formaldehyde free lacquer. The planks are installed on foam and polythene sheet on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (Skirting, Profile) etc. |
| 80 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete. |
| 81 | Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete. |
| 82 | 66 mm overall thickness partition using 8 mm thick, double skin multipurpose cement board Type B, Category III as per IS: 14862 : 2000 reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) with suitable fibre cement screws. |
| 83 | Providing Coving at all the junctions for a size of 50mm X 50mm with polymer modified mortar prepared by mixing 50 kg cement + 150kg Sand + 4Litre of Latex + Water required for mortar consistency, including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. (Latex : Fosroc Nitobond SBR/ Myk AquaArm latex 45/ Sika Sika Latex power). |
| 84 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 85 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required..DSR 2023 P 186 Sl no 12.1.2 |
| 86 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.DSR 2023 P 170 Sl no 10.1 |
| 87 | Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride)(Make: Fenstech) Ventilator made out of hollow chambered UPVC Sections having isolated drainage and reinforced throughout with galvanized steel. The ventilator shall be made out of UPVC sections having an overall size of 60mm x 60mm thickness. Structurally Reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm with locking system. Prefabricated & welded through fusion welding the window outer frame & sash shall be fitted with 5mm thickness Pin Head glass of reputed brand (Saint Gobain Glass), weathering sealant & Accessories like louvers made by brand. The outer frame is to be installed at the side using anchor fastener, Silicon Rubber Sealant. At least 15 years manufacturing warranty for discoloration, wrapping, mechanical failures, Shrinkages, Rooting Corrosion etc. with a quality Certificate from relevant departments of that government through the Dealers including of all materials and abounds etc. Complete as per directions of Engineer in charge. |
| 88 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer in Charge. |
| 89 | Painting two coat with approved synthetic enamel paint to new wood over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 90 | Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer in Charge.Ground Floor |
| 91 | First Floor |
| 92 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer in charge.Ground Floor |
| 93 | First Floor |
| 94 | Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer in charge. Ground Floor |
| 95 | First Floor |
| 96 | Terrace Floor |
| 97 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer in charge. Ground Floor |
| 98 | First Floor |
| 99 | Construction of granular sub base of grading IV by providing graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the |
| 100 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M 40 grade of approved make, design, colour and size with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP 63:2018.SOR 2022 Sl no 2 P 233 |
| 101 | Supplying and fixing of Pre cast kerb stone of size 300mm x300mm x 150mm of M 30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984 SOR 2022 Sl no 3 P 233 |
| 102 | ELECTRICAL WORKSupply,Installation, Testing & Commissioning of of 15 Passenger cum stretcher lift gearless Machine room Less (MRL) Capacity(1020Kg), Elevator G+1 Floors with ACVVVF drive/Control with ARD 1.25 MPS, SS honeycomb interior, 2hr fire rated door with simplex operation without attendant car position indicators,battery operated alarm bell & emegency light,SS honeycomb finish door finished car interior, recess Granite flooring ,power operated centre opening automatic sliding SS honeycomb finish doors for car entrance & hoist way entrance etc .SS material shall be of grade SS 304 and thickness not less than 1.2mm Machine beams,buffer support channels,facia plate including sills pit ladder metal screen in Elevator pit etc.as per specifiaction including cost of (i)Overload detection,(ii)Voice announcement,(iii) Intercom,(iv)Braille Buttons v) flat CAT 6 cable for CCTV with all Civil & Electrical works required for installation of Elevator in the existing lift well and machine room,scaffolding ,floor cutting including Fireman's switch complete in all respect.The Elevator should be suitable for physically handicapped person. Make: Otis/ Mitsubishi/ Schindler/ JohnsonLift As above |
| 103 | Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 58.5KVA (Make Kirloskar/ Jakson/ Mahindra/ Sterling/ Captiva/ TMTL) out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP 52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV+ norms etc as per following specifications mentioned below. Warrentee period must be 2 years ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.ENGINE: Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 58.5KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 12 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size and length with insulation or clading.02. Diesel tank suitable for 8 to 10 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standardsAMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter connection etc. for Trouble Free smooth function for 58.5KVA DG Set complete with Battery Charger & leads as required. BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. , control cable of 15mtr 2.5sqmm 6core , civil foundation work. (The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work) |
| 104 | SITC of LT indoor floor mounted cubical type electrical main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder coated paint is designed as G.A drawing. (FOR LIFT)as per direction of Engg. in Charge. Warranty period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.Provision of 40kA 3P+N type 2 SPD alongwith 63A, 4P, MCB, C series, 10kA is to be given in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed. 63amp panel board having 63A Amp 16KA 4P MCCB TMR based release with adjustable overload ,Icu=100%Ics as incommer, 100 amp electrolyte Aluminium bus ba 1 Set, 63A Amp 4P RCCB 30mA 1 No,25A Amp DP RCCB 30mA 2 No,6 32A DP MCB 10ka, c series 2 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make of mccb : LEGRAND DPX3 / Siemens 3VA Model/ Schneider CVS/ABB FORMULA) Make of MCB LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ABB SB200(Lift Panel) |
| 105 | Cables, Cable Laying & TerminationSupplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)4C X 16 sqmm |
| 106 | 3.5C x 35 sqmm |
| 107 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Above 25 sq. mm and upto 120 sq. mm |
| 108 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing On Wall Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required.Upto 25 sq. mm |
| 109 | Above 25 sq. mm and upto 120 sq. mm |
| 110 | TERMINATION OF CABLESSupply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 16 sqmm |
| 111 | 3.5C X 35 sqmm |
| 112 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 113 | Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.18 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg. in Charge. |
| 114 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg. in Charge. Main LT ROOM dg panel earthing |
| 115 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 116 | Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required. |
| 117 | DISMANTLING AND RE INSTALLATIONDismantling, Lifting, shifting, Reinstallation, Testing and commisioning of existing 25KVA/63KVA Dgset to the New location (With in 1000mt) in either way like manual or with hydra.The cost is inclusive of foundation for DG set as per OEM standard in complete as per the direction of Engineer in charge. |
| 118 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked (Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI/V Guard) with 20 mm dia HMS FRLS PVC conduit ISI marked (Make AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal) 6A modular type (anti bactorial & flame retradant type) switch ISI marked (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision)) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group A |
| 119 | Group B |
| 120 | Group C |
| 121 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 122 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 123 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius Next gen)/ Schneider(Zencelo)/PANASONIC(VISION) |
| 124 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 125 | Supplying and installation of AC Point having 16 20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg. in Charge .All the Components should be warrantied for a replacement period of 1 year against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 126 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI/V Guard/V Guard) in recessed HMS FRLS PVC conduit of mentioned size (Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights)(2X1.5+1X1.5) |
| 127 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5) |
| 128 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5) |
| 129 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5) |
| 130 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ Orient/ Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 131 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(With fan Regulator) |
| 132 | Supplying an fixing of recess/surface mounted 2'x2'(595mmx595mmx70mm(+/ 5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 140lm/W and lumen output not less than 3600 lumens , CRI not less than 80, CCT of 5700 6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140 270 V, 50 Hz ,L70 50,000 burning hrs (5 years warranty) as required as per direction of Engg. in Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj) . |
| 133 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 134 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton).The luminaire should be Replacement Warranty will be 2 years |
| 135 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 136 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 137 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 138 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.8 Way(8+24) Way TPN Mcb DD DB Horizontal Type as per IEC 61439 3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43 IK09 with metal door warranty on DB is 3 years |
| 139 | Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 140 | Supplying and fixing 63Amps 4P 415 volts MCB 415 volts, C series,10KA breaking capacity, Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ABB SB 200 in the existing MCB DB with connections as per direction of Engg. in Charge..Warranty on MCB is 1 year. |
| 141 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB SB200) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 year. |
| 142 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB SB200) in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 year. |
| 143 | Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 year |
| 144 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB SB200) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 year.. |
| 145 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ Kei/ Gloster/ Finolex/ RR Kabel)3C x 6 sqmm |
| 146 | 4C X 16 sqmm |
| 147 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 148 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing On Wall Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required.Upto 25 sq. mm |
| 149 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 16 sqmm |
| 150 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS IEC 61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of (Make Profab/ OBO/ Neidax). The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg. in Charge. |
| 151 | Supplying,fixing of FLOOR RACE WAY GALVANIZED(GC) type AS PER EN ISO 1461 , with internal dimensions of size 38mm(H) x 225mm(W), of MAKE Legrand/ Profab/OBO/Neidax .(With all accessories,bend,cover,supporter) as required as per direction of Engg. in Charge. |
| 152 | Supplying,fixing of 8 module under FLOOR outlet box IP20, size not less than 308mmx308mm as required as per direction of Engg. in Charge.MAKE Profab/OBO/Neidax/Legrand |
| 153 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 154 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 155 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R 32/R 410/ R 407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type Cooling only (Category II Make : O General/ Daikin)2.0 TR with 5 Star BEE Rating (O General ASGG24CGWA B/ Daikin FTKM60XV16) |
| 156 | Supply, installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.2 Tr high wall split A.C |
| 157 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 158 | Supply, installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe |
| 159 | S/F of 5KVA Voltage stabilizer (130V 270V) ISI Marked. (Make: V Guard/ MICRO TECH). |
| 160 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. (Make: Systimax/ Legrand/ Panduit) |
| 161 | SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. (Make: Systimax/ Legrand/ Panduit) |
| 162 | SITC of Cat6 I/O with Single Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. (Make: Systimax/ Legrand/ Panduit) |
| 163 | SITC of Cat 6, 24 port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. (Make: Systimax/ Legrand/ Panduit) |
| 164 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 165 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 166 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C 50°C ,Power Supply AC: 100 240V. Make: Digisol/ Cisco/ HP |
| 167 | SITC of 1G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 168 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173 1:2002 / IEC 60794 1/IEC 60793 2 50 class B1.3 / EN 60793 2 50: class B1.3 / ITU Recommendation G.652.D the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 169 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19 ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR 326 Core . Make: Systimax/ Legrand/ Panduit |
| 170 | SITC of OFC Patch Cor, SM (OS2), Duplex LC SC, LC LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Systimax/ Legrand/ Panduit |
| 171 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068 2 11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand |
| 172 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/Pelco/Axis/Bosch |
| 173 | Audio Video SystemSITC of PTZ Camera USB based : Yes; Zoom : Minimum 20X Optical Zoom; Digital 16X; Iris: f=5.5~110mm ; F1.6 ~ F3.5;Viewing Angle:3.3° (tele) 54.7° Wide ;Sensor:1 /2.8inch or better CMOS sensor; Mega Pixels:2.07 ; Video Format: SDI Video Formats: 1080P60/50/30/25/59.94/29.97 ; 1080I60/50/59.94. 720P / 50/ 30 / 25 /59.94/29.97; Minimum illiumination:0.5 Lux ; DNR:2D & 3D DNR; White Balance :Auto/Manual/One push 3000K / 3500K / 4000K / 4500K / 5000K / 5500K / 6000K / 6500K /7000K; Electronic Shutter : Auto/Manual; Focus : Should be Auto/Manual/One Push; BLC:ON/Off; WDR : Off/Dynamic level adjustment; Video Adjustment: Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve; SNR : greater than55 dB; Interface : USB 2.0 x1 , USB 3.0 x1, LAN x1, RS232 x 1, HDMI x 1 ; Audio InVideo Compression Format:H.265/H.264 ; Control Protocol: VISCA/PELCO D/Pelco P; Baud Rate : 11520 / 9600 / 4800 / 2400 ; LAN Port :Yes; Network Protocol: RTSP/RTMP/ ONVIF, GB/T28181; Pan Rotation:+ 170° Tilt Rotation :30°~+90° ; Pan Control Speed: 0.1~60°/second ;Tilt Control Speed : 0.1~30°/second ;Preset Speed: Pan: 60°/second, Tilt 30°/second ;Preset Number:255 presetMake: Lumens, Vaddio, ATDSC |
| 174 | SITC of Chairman Unit Microphone: Base Unit Frequency Response: 20Hz 20KHz; Sensitivity: 46 dBV:2dB ; Impedance : 2 kohm or more; Directional : greater than20 dB (1 kHz) or more; Equivalent Noise :20 dBA (SPL) or more; SPL : 125 dB (THD less than 3%) or more; S/N Ratioo :greater80dB or more; Cross talk : greater80dB or more; T.H.D.: less0.05% or more; Should have a LCD on the base to show status; Should have a Earphone Jackof 3.5mm with earphone load of greater than10 ohm or more; Should support Earphone volume upto 10 mW or more Supports Discussion & Video; Chairman Base Unit should have backlit Talk button along with Priority Button; Connectivity :Dual Port RJ45 for Daisy Chain connection with Loop In Loop Out; Base Dimension :184( L ) mm x 124mm (W) x 49mm(H);Microphone : It should have detachable Microphone ; Polar Pattern Cardioid; LED Light Should have Red Ring LED Light Indicating Microphone ON/Off; Microphone Length 420mm or more .Make: Televic, ATDSC, Brahler, Arec,Peoplelink, Bose |
| 175 | SITC of Delegate Unit Microphone: Base Unit Frequency Response: 20Hz 20KHz; Sensitivity: 46 dBV:2dB ; Impedance : 2 kohm or more; Directional : greater than20 dB (1 kHz) or more; Equivalent Noise :20 dBA (SPL) or more; SPL : 125 dB (THD less than 3%) or more; S/N Ratioo :greater80dB or more; Cross talk : greater80dB or more; T.H.D.: less0.05% or more; Should have a LCD on the base to show status; Should have a Earphone Jackof 3.5mm with earphone load of greater than10 ohm or more; Should support Earphone volume upto 10 mW or more ; Supports Discussion & Video; Delegate Base Unit should have backlit Talk button ; Connectivity :Dual Port RJ45 for Daisy Chain connection with Loop In Loop Out; Base Dimension :184( L ) mm x 124mm (W) x 49mm(H);Microphone : It should have detachable Microphone ; Polar Pattern Cardioid; LED Light Should have Red Ring LED Light Indicating Microphone ON/Off; Microphone Length 420mm or more.Make: Televic, ATDSC, Brahler, Arec,Peoplelink, Bose |
| 176 | SITC of Digital Controller with Look at me Built in:It should be based on digital control technology. It should include Microphone Management, Automatic Camera Tracking, Conference Audio Recording, etc.; Digital Conference System should get connected to the PC via USB and should have a software with lot of conference control features and the control unit should be accessed by the user on PC . The user should able to manage and control the conference proceedings, managing centrally all aspects of the conference including Main unit setting, Speaking , Camera Tracking, Editing Data of Participants. It should be feature rich connecting the main unit with PC and carrying out different functions.; The software should have the facility of setting up the Active Microphones & Operations Modes.; The Operation Modes should have Limit Mode which should limit the number of active microphones as required. It should also have the function to set time limit of delegate units. FIFO ( First In First Out), Apply Mode, Free Mode and Voice Control : The main unit should provides power supply to all Microphones. It should have minimum 3 groups of 6 channel RJ45 microphone unit interfaces, adopting closed loop on FTP Cat6 cable to transmit high quality digital audio, control and other information data. It should have minimum 4 channels of 8 core microphone unit and each channel should supports 30 units shall get connected upto 120 units. The single host unit shall support connectivity to a maximum of 256 with support of expansion power supply. It should be able to support upto 1200 units with expansiopn units. .Conference Recording : It should have USB interface for conference recording. . Look At Me / Speaker Tracking : It should have Built in video camera auto tracking function to enable speaker tracking. It should control and move the Camera towards the active speaker. It should have the capability to support up to 4 cameras with video matrix.. It should have Network based management system and should be able to set IP address, with TCP / IP network interfacegreater thanIt should get connceted to wireless router and should be able to support and have access through computer, mobile phone, tablet and other devices in the same LAN to set up features and it should support Google. Android / Microsoft Windows systems and other operating system. . It should have facility to provide balanced & unbalanced Audio output. ; The front panel should have: Display: It should have a TFT Touch Display with minimum size of 3.5 inch.Power Switch x 1 or more, Power Indicator light x 1 or more, Control knob x 1 or more, 2 Buttons for setting ; The Rear Panel should have : Power Button for On/Off; Power Interface : 3 Pin AC110V 220V/50Hz or better ; It should have RS232(3P) x 1or more to connect the central controller; 1 x RS232(3P) or more to connect the camera switcher; RS232 & RS485(6P) x 1 or more to control the camera. 1 x USB for computer connectivity and control; Etherner Port : RJ45 x 1 or more ; Music Ports Input : RCA x 1 or more , Music Output Ports Output : RCA x 3; Line Output balanced XLR x 1 or more, Line Output Unbalanced 6.35mm x1 or more; HDMI Input x 4 or more; HDMI Output x 1 or more; Ethernet interface between the CMU and the PC , Microphone Input : 4 x DIN 8 or more, 3 x RJ 45 or more; Microphone Output : 3 x RJ 45; Frequency response : 20Hz 20KHz, SNR : greater than96dB, T.H.D : less than0.05%, or better.Make: Televic, ATDSC, Brahler, Arec,Peoplelink, Bose |
| 177 | SITC of Digital Signal Processor with Quarter rack 1RU mainframe with eight user configured card slots, , and built in 4x4 I/O of Dante network audio. Integrated license activated AEC. Dual core processing 40 bit floating DSP.Powered using PoE or included external power supply. Surface mount bracket included.4ch Mic/Line input with selectable mic, line, mic gain, and phantom power per input. 32 bit analog to digital converters.4ch Line output. 32 bit digital to analog converters. 2ch input + 2ch output USB audio.Software license activated AEC. 8ch of AEC 250ms delay / 16ch 100ms.Make: Xilica, Crestron, Extron |
| 178 | SITC of 2 way Cabinet Loudspeaker, LF Driver 3 & HF Driver 1 Max Power Handling 60W 8 Ohms ; Multiple 100V Taps : 20W / 10W / 5W; Frequency range 60Hz 20Khz ; Sensitivity 85 dB or better and Max SPL 95 dB or more; Coverage of 90° x 90° (H X V)or more ; IP40 Rated; Make: Audac, Extron, Yamaha, Sonodyne |
| 179 | SITC of Dual Channel Energy Star Rated Class D Amplifier , 2 X 250W 4ohm, 2 X 130W 8ohm, 1 X 500W 8ohm Bridge or better, Signal / Noise greater than90 dB or better THD+N ( 1 kHz) less than 0.1% or better Crosstalk ( 1 kHz) greater than70 dBA or better.Make: Audac, Extron, Yamaha, Sonodyne |
| 180 | SITC of Interactive Panel Size 98 Inches or higher, Aspect Ratio 16:09,Resolution3840x2160 (4K UHD resolution), Contrast Ratio 1,200:1 or higher, Brightness 450cd/m2 or higher, Response Time 5 ms or better, Viewing Angles 178°:178° (Horizontal/Vertical), Backlight Life 50,000 Hours or more, Protection Glass Thickness Thoughened Glass with level 7MoHS or above,Special features non glare panel. Touch Technology Infrared Touch, Touch Point 50 points or higher, Input/ Output Interface or more HDMl 3.0 x3, USB 3.0 x4, USB 2.0 x1, USB Type C x1, Touch USB B x2, OPS Slot x1 (80 pin), LAN In & Out x1, SPDIFx1, HDMI Out x1, Audio Port 1, RS232 x1 ,Connectivity WIFI,and RJ45 wired , Speakers 2*20 W built in Speaker, Wall Mounting Inbuilt OS Android 14 ; 8 GB or above RAM DDR4; 128 GB or above ROM,CPU Octa core, Certifications BIS, , Operational Life of 50,000 hours, Certificate BIS & RoHS certified and offered product should be under Make in India product, ISO 9001, ISO14001, ISO 27001, OHSAS 45001, E Waste CPCB Warranty 3 Yrs SupportMake: Peoplelink, LG, Samsung |
| 181 | SITC of 55\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio 1200:1, Response Time (G to G) 8 ms, Refresh Rate. 60 Hz, Life span (hrs) 30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/ Samsung/ Sony |
| 182 | SITC of 8 Port PoE Switch. Make Digisol/ Cisco/ HP/ Netgear |
| 183 | SITC of 4x1 4K60 4:4:4 HDR AV Switcher Provides four HDMI® inputs and one HDMI output. Includes support of HDR (High Dynamic Range) and Dolby Vision® video formats, automatic switching of HDMI inputs, advanced EDID management. Control via Ethernet and enterprise grade security.Make: Crestron, Extron, AMX |
| 184 | SITC of 1x4 4K60 4:4:4 HDR AV Amplifier Provides One HDMI® inputs and Four HDMI output. Includes support of HDR (High Dynamic Range) and Dolby Vision® video formats, automatic switching of HDMI inputs, advanced EDID management. Control via Ethernet and enterprise grade security.Make: Crestron, Extron, AMX |
| 185 | Supply, installation, testing and commissioning of flush mounted conference table pop up box with 1 No HDMI port, 1 No RJ45 (Cat6), 2 Nos 6A/16A universal sockets, complete with metal housing, soft open lid, internal wiring with FRLS cables, earthing provision, including cutting and finishing of table, as required. Make Legrand/ Liberty/ MX |
| 186 | SITC of Cables and Connectors |
| 187 | Programming charges |
| 188 | SITC of 17U 600/650D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray Ventilation 495W 375D and H/W screw920sets). Make:Valrack, Rittal, Legrand |
| 189 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make AKG/ BEC/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)25 mm |
| 190 | 20 mm |
| 191 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching (75 mm depth) and refilling as per direction of Engg. in Charge. 32 mm dia |
| 192 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching (75 mm depth) and refilling as per direction of Engg. in Charge. 50 mm dia |
| 193 | Supply, installation, testing and commissioning of flush mounted conference table pop up box with 1 No HDMI port, 1 No RJ45 (Cat6), 2 Nos 6A/16A universal sockets, complete with metal housing, soft open lid, internal wiring with FRLS cables, earthing provision, including cutting and finishing of table, as required. Make Legrand/ Liberty/ MX |
| 194 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group A |
| 195 | Group B |
| 196 | Group C |
| 197 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 198 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 199 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make : Legrand (Myrius Next gen)/ Schneider(Zencelo)/ PANASONIC(VISION) |
| 200 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 201 | Supplying and installation of AC Point having 16 20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg. in Charge .All the Components should be warrantied for a replacement period of 1 year against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 202 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI/V Guard) in recessed HMS FRLS PVC conduit of mentioned size (Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights)(2X1.5+1X1.5) |
| 203 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5) |
| 204 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5) |
| 205 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5) |
| 206 | 4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit. (4X6+2X4) |
| 207 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ Orient/ Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 208 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(With fan Regulator) |
| 209 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 210 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 211 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 212 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) The luminaire should be Replacement Warranty will be 2 years |
| 213 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 214 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 215 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439 3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43 IK09 with metal door warranty on DB is 3 years |
| 216 | Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 217 | Supplying and fixing 63Amps 4P 415 volts MCB (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. Warranty on MCB is 1 years. |
| 218 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 years. |
| 219 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years. |
| 220 | Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB FB 200/ ABB ITUS) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 year |
| 221 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. .. The MCB should be Replacement Warranty will be 1 years.. |
| 222 | Cables, Cable Laying & TerminationSupplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)3C x 6 sqmm |
| 223 | 4C X 16 sqmm |
| 224 | CABLE LAYINGLaying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 225 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing On Wall Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required.Upto 25 sq. mm |
| 226 | TERMINATION OF CABLES Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 16 sqmm |
| 227 | (Earthing) INSTALLATIONSupplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 228 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 229 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit |
| 230 | SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. Make: Systimax/ Legrand/ Panduit |
| 231 | SITC of Cat 6, 24 port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit |
| 232 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 233 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 234 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C 50°C ,Power Supply AC: 100 240V. Make: Digisol/ Cisco/ HP |
| 235 | SITC of 1G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 236 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173 1:2002 / IEC 60794 1/IEC 60793 2 50 class B1.3 / EN 60793 2 50: class B1.3 / ITU Recommendation G.652.D the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 237 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19 ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR 326 Core . Make: Systimax/ Legrand/ Panduit |
| 238 | SITC of OFC Patch Cor, SM (OS2), Duplex LC SC, LC LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Systimax/ Legrand/ Panduit |
| 239 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068 2 11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand |
| 240 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/ Pelco/ Axis/ Bosch |
| 241 | Supply , Installation, testing , commissioning of 64 Channel NVR with 8 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS). Make Honeywell value series/ Pelco/ Axis/ Bosch |
| 242 | Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDD. Make: WD/ Segate/ Toshiba |
| 243 | SITC of 55\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio 1200:1, Response Time (G to G) 8 ms, Refresh Rate. 60 Hz, Life span (hrs) 30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/ Samsung/ Sony |
| 244 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make Akg/ Bec/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)25 mm |
| 245 | 20 mm |
| 246 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 247 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 248 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R 32/R 410/ R 407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type Cooling only (Category II Make : O General/ Daikin)1.5 TR with 5 Star BEE Rating (LG AS Q20JWZE/ O General ASGG18CGWA B/ Daikin FTKU50XV16) |
| 249 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.1.5 TR high wall split A.C |
| 250 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 251 | DRAIN PIPINGSupply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe |
| 252 | For 1.5 TR high wall split A.C |
| 253 | Supply and fixing of 4kVA Voltage stabilizer (130V 270V)ISI marked (Make V Guard/ Microtek) |
| 254 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked (Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei/V Guard) with 20 mm dia HMS FRLS PVC conduit ISI marked (Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) 6A modular type (anti bactorial & flame retradant type) switch ISI marked (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision)) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group A |
| 255 | Group B |
| 256 | Group C |
| 257 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 258 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 259 | SUB MAIN WIRINGReceass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei/V Guard) in recessed HMS FRLS PVC conduit of mentioned size (Make Akg/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights)(2X1.5+1X1.5) |
| 260 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5) |
| 261 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(fan Regulator compatible) |
| 262 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 263 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 264 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 265 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.2+4 way MCB Enclosure DB (GLAZED door)(only each EM. Connection UPS LOAD) Warranty on DB is 3 years |
| 266 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 3 years. |
| 267 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. .. The MCB should be Replacement Warranty will be 3 years.. |
| 268 | Cables, Cable Laying & TerminationSupplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ Kei/ Gloster/ Finolex/ RR Kabel)3C x 6 sqmm |
| 269 | CABLE LAYINGLaying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 270 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing On Wall Surface (Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required.Upto 25 sq. mm |
| 271 | S/IT/C Of Earthing withG.I earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg. in Charge. |
| 272 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 273 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit |
| 274 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. (Make Honeywell Value series/ Pelco/ Axis/ Bosch) |
| 275 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. (Make AKG/ BEC/ Precision/ Norpak/ Kinjal.) (Only for data/ telephone/ CCTV)20 mm |
| 276 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 277 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 278 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI/V Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group A |
| 279 | Group B |
| 280 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. Make Schneider(Zencelo)/ legrand(Myrius NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 281 | SUB MAIN WIRINGReceass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei/V Guard in recessed HMS FRLS PVC conduit of mentioned size Make Akg/ Bec/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights)(2X1.5+1X1.5) |
| 282 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5) |
| 283 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ Orient/ Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 284 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 285 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) The luminaire should be Replacement Warranty will be 2 years |
| 286 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 287 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 288 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make Legrand Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years |
| 289 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years. |
| 290 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years.. |
| 291 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)3C x 6 sqmm |
| 292 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 293 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 294 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 295 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 296 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 297 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI /V Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group C |
| 298 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 299 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 300 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 301 | Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. Make Legrand/ Schneider/ Siemens ISI marked as approved,All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 302 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI /V Guard in recessed HMS FRLS PVC conduit of mentioned size Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 303 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/ LIGHT CKT/ 5A PLUG/ UPS POINT ) (2X2.5+1X1.5) |
| 304 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to PSB/ POWER POINT/ AC POINT) (2X4+1X1.5) |
| 305 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5) |
| 306 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ Orient/ Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 307 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(fan Regulator compatible) |
| 308 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years |
| 309 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 310 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9 as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439 3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43 IK09 with metal door warranty on DB is 3 years |
| 311 | Supplying and fixing 63Amps 4P 415 volts MCB (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. Warranty on MCB is 1 years. |
| 312 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 years. |
| 313 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. .. The MCB should be Replacement Warranty will be 1 years. |
| 314 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)4C X 16 sqmm |
| 315 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 316 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 16 sqmm |
| 317 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 318 | Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required. |
| 319 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 320 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit |
| 321 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/Pelco/Axis/Bosch |
| 322 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make AKG/ BEC/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)20 mm |
| 323 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 324 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 325 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI/V Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group B |
| 326 | Group C |
| 327 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 328 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 329 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius Next gen)/ Schneider(Zencelo)/PANASONIC(VISION) |
| 330 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 331 | Supplying and installation of AC Point having 16 20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg. in Charge .All the Components should be warrantied for a replacement period of 1 year against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 332 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI /V Guard in recessed HMS FRLS PVC conduit of mentioned size Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT) (2X1.5+1X1.5) |
| 333 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/ LIGHT CKT/ 5A PLUG/ UPS POINT ) (2X2.5+1X1.5) |
| 334 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to PSB/ POWER POINT/ AC POINT) (2X4+1X1.5) |
| 335 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (LFDB TO LBDB/ UBDB) (2X6+1X2.5) |
| 336 | Supplying, installation, testing and commissioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Bajaj Turbo Pro 12DC5) including wiring the down rod of standard length (up to 30 cm) with 1.5 sq. mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Eng. in Charge, Replacement Warranty will be 4 years. |
| 337 | Supplying an fixing of recess/surface mounted 2'x2'(595mmx595mmx70mm(+/ 5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 140lm/W and lumen output not less than 3600 lumens , CRI not less than 80, CCT of 5700 6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140 270 V, 50 Hz ,L70 50,000 burning hrs (5 years warranty) as required as per direction of Engg. in Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj) . |
| 338 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells /Philips/ Wipro /Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 339 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 340 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 341 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439 3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43 IK09 with metal door warranty on DB is 3 years |
| 342 | 2+4 way MCB Enclosure DB (GLAZED door)(only each EM. Connection UPS LOAD) Warranty on DB is 3 years |
| 343 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years. |
| 344 | Supplying and fixing 63Amps 4P 415 volts MCB (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. Warranty on MCB is 1 years. |
| 345 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 years. |
| 346 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. .. The MCB should be Replacement Warranty will be 1 years.. |
| 347 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)4C X 16 sqmm |
| 348 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 349 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 16 sqmm |
| 350 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 351 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 352 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R 32/R 410/ R 407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type Cooling only 1.5 TR with 5 Star BEE Rating (LG AS Q20JWZE/ O General ASGG18CGWA B/ Daikin FTKU50XV16) |
| 353 | 2.0 TR with 5 Star BEE Rating (O General ASGG24CGWA B/ Daikin FTKM60XV16) |
| 354 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.1.5/ 2.0 TR high wall split A.C |
| 355 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 356 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe |
| 357 | Supply and fixing of 4kVA Voltage stabilizer (130V 270V)ISI marked (Make V Guard/ Microtek) |
| 358 | S/F of 5KVA Voltage stabilizer (130V 270V)ISI marked (Make: V Guard/ MICRO TECH). |
| 359 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit |
| 360 | SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. Make: Systimax/ Legrand/ Panduit |
| 361 | SITC of Cat 6, 24 port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit |
| 362 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50 micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 363 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 364 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C 50°C ,Power Supply AC: 100 240V. Make: Digisol/ Cisco/ HP |
| 365 | SITC of 1G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 366 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173 1:2002 / IEC 60794 1/IEC 60793 2 50 class B1.3 / EN 60793 2 50: class B1.3 / ITU Recommendation G.652.D the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 367 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19 ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR 326 Core . Make: Systimax/ Legrand/ Panduit |
| 368 | SITC of OFC Patch Cor, SM (OS2), Duplex LC SC, LC LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Systimax/ Legrand/ Panduit |
| 369 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068 2 11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand |
| 370 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8 CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/ Pelco/ Axis/ Bosch |
| 371 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make AKG/ BEC/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)20 mm |
| 372 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 373 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 374 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei /V Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make Akg/ Bec/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make Schneider(Zencelo)/ legrand( Myrius Next gen) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make Schneider(Zencelo)/ legrand( Myrius Next gen)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group C |
| 375 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 376 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. Make Schneider(Zencelo)/ legrand( Myrius Next gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 377 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius Next gen)/ Schneider(Zencelo)/PANASONIC(VISION) |
| 378 | Supplying, fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. Make Schneider(Zencelo)/ legrand( Myrius Next gen)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 379 | Supplying and installation of AC Point having 16 20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg. in Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 380 | Receass wiring for circuit/ submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/ KEI /V Guard in recessed HMS FRLS PVC conduit of mentioned size Make AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 381 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/ LIGHT CKT/ 5A PLUG/ UPS POINT ) (2X2.5+1X1.5) |
| 382 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to PSB/ POWER POINT/ AC POINT) (2X4+1X1.5) |
| 383 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5) |
| 384 | 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit. (4X10+2X6) |
| 385 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 386 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(With fan Regulator) |
| 387 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 388 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 389 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9 /ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 390 | 2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD) Warranty on DB is 3 years |
| 391 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years. |
| 392 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. .. The MCB should be Replacement Warranty will be 1 years.. |
| 393 | S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg. in Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication. Provision of 65 kA 3P+N type 1+2 SPD with 63 A 4P MCB, C series, 10 kA. is to be given in the incomer. Mandatory provision of cable alley is to be given. |
| 394 | Incommer 1 One number of 250A 4P Icu=100%Ics,36Ka MCCB with Thermal magnetic release ( Make Legrand DPX3 / Siemens 3VA Model/ Schneider CVS) (From 100 KVA Transformer)Busbar 04 numbers of 300Amps Al busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Out going 4 numbers of 63A 4P MCCB, 16Ka MCCB withTMR based release with adjustable overload,Icu=100%Ics (Make Legrand DPX3/ Siemens 3VA Model/ Schneider CVS) (New BMW Block, Store and 2nos spare) In commer 2 One number of 200A 4P Onload Manual Change over (Make Legrand / Siemens/ Schneider) (Existing DG 1 (63kva) Incommer)Out going 8 numbers of 63A 4P MCCB, 16Ka MCCB withTMR based release with adjustable overload,Icu=100%Ics (Make Legrand DPX3/ Siemens 3VA Model/ Schneider CVS) (Office building, Mortuary, Panel room, Opthomology, BPMU office, New Labour Block, and 2nos spare) Out going 4 numbers of 63A rating,10 KA breaking capacity,C series, DP MCB (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9) (Dental Opd, Office room Lighting DB and two Spare)In commer 3 One number of 200A 4P Onload Manual Changeover (Make Legrand / Siemens/ Schneider) (Existing DG 2 (25kva) Incommer)Out going 5 numbers of 63A 4P MCCB, 16Ka MCCB withTMR based release with adjustable overload,Icu=100%Ics (Make Legrand DPX3 / Siemens 3VA Model/ Schneider CVS) (Meeting room, Lighting Feeder panel, Water Supply and 2nos spare) Out going 2 numbers of 63A rating,10 KA breaking capacity,C series, 4P MCB (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9) (SPARE)Out going 5 numbers of 32A rating,10 KA breaking capacity,C series, DP MCB (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9) (Waiting Area, Waiting Area 2, Toilet Block and 2 Spare )Instrument (i) 09 numbers phase indicating lamp with toggle switch & HRC fuse.(ii) 03 set of digital type multifunction meter with CT for voltage, current, frequency, PF, THD indication with RS 485 Compactivity for bms data.1 no. 65 kA 3P+N type 1+2 SPD with 63 A 4P MCB, C series, 10 kA. (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9) Cables, Cable Laying & TerminationSupplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ Kei/ Gloster/ Finolex/ RR Kabel)3.5C x 35 sqmm |
| 395 | 3.5C X 120 sqmm |
| 396 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Above 25 sq. mm below 120sq mm |
| 397 | Laying of One No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing On Wall Surface(Clamped with saddle/ PVC & UPVC Pipe)/ CableTray as required.Above 25 sq. mm below 120sq mm |
| 398 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)3.5C X 35 sqmm |
| 399 | 3.5C X 120 sqmm |
| 400 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS IEC 61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of Make Profab/ OBO/ Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg. in Charge. |
| 401 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS IEC 61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of Make Profab/ OBO/ Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg. in Charge. |
| 402 | S/IT/C Of Earthing withG.I earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg. in Charge. |
| 403 | Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required. |
| 404 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 405 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legrand/ Panduit |
| 406 | SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/ TIA 568C.2,ISO/ IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. Make: Systimax/ Legrand/ Panduit |
| 407 | SITC of Cat 6, 24 port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit |
| 408 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/ TIA/ EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 409 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 410 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C 50°C ,Power Supply AC: 100 240V. Make: Digisol/ Cisco/ HP |
| 411 | SITC of Gate way Router for 500 users with Built in UTM firewall provides 5 years subscription for anti virus, layer 3 7 IDS/IPS, DPI, SSL detection, and more. Built in VPN router supports 2.5Gbps or 3Gbps to allow easy remote access. 2 x 2.5 Gigabit SFP port and 10 x Gigabit Ethernet ports *3x Fixed WAN. 2.5Gbps Router. 4 x PoE out ports, IEEE802.3af/at, Maximum PoE Wattage: 36W. Make Grandstream, Paloalto, Fortigate |
| 412 | SITC of 10G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 413 | SITC of 1G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 414 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173 1:2002 / IEC 60794 1/IEC 60793 2 50 class B1.3 / EN 60793 2 50: class B1.3 / ITU Recommendation G.652.D the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 415 | SITC of Rack mount Draw Type 24 port Loaded LIU available in Standard 19 ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR 326 Core . Make: Systimax/ Legrand/ Panduit |
| 416 | SITC of OFC Patch Cor, SM (OS2), Duplex LC SC, LC LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Systimax/ Legrand/ Panduit |
| 417 | SITC of 24U 600/650D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray Ventilation 495W 375D and H/W screw920sets). Make: Valrack/ Rittal/ Legrand |
| 418 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/ Pelco/ Axis/ Bosch |
| 419 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make AKG/ BEC/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)25 mm |
| 420 | 20 mm |
| 421 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 422 | Recessed/ Surfaced wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked (Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei/V Guard) with 20 mm dia HMS FRLS PVC conduit ISI marked (Make AKG/ Bec/ Precision/ Norpak/ Anchor/ Kinjal) 6A modular type (anti bactorial & flame retradant type) switch ISI marked (Make Schneider(Zencelo)/ legrand( Myrius Next gen) /Panasonic (vision)) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) (Make Schneider(Zencelo)/ legrand (Myrius Next gen)/ Panasonic (vision)) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.Group A |
| 423 | Group B |
| 424 | Group C |
| 425 | S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make Schneider(Zencelo)/ legrand (Myrius NEXT GEN)/ Panasonic (vision) |
| 426 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. in Charge. (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 427 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius Next gen)/ Schneider(Zencelo)/PANASONIC(VISION) |
| 428 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg in charge. (Make Schneider(Zencelo)/ legrand( Myrius NEXT GEN)/ Panasonic (vision)) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 429 | Supplying and installation of AC Point having 16 20A DP MCB, C series with enclosure, Make: Schneider/ Siemens/ Legrand/ ABB c of suitable size as required as per direction of Engg. in Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 430 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei/V Guard) in recessed HMS FRLS PVC conduit of mentioned size (Make AKG/ Bec/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg. in Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights)(2X1.5+1X1.5) |
| 431 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5) |
| 432 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5) |
| 433 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(PDB/ Panel TO SPN DB) (2X6+1X2.5) |
| 434 | 4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit. (4X10+2X6) |
| 435 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make Havells/ Crompton/ Usha/ Orient/ Bajaj) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg. in Charge. Replacement Warranty will be 2 years. |
| 436 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery greater than equal to215m3/min Make Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg. in Charge,Replacement Warranty will be 4 years.(With fan Regulator) |
| 437 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 438 | Supplying an fixing of recess/surface mounted 2'x2'(595mmx595mmx70mm(+/ 5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 140lm/W and lumen output not less than 3600 lumens , CRI not less than 80, CCT of 5700 6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140 270 V, 50 Hz ,L70 50,000 burning hrs (5 years warranty) as required as per direction of Engg. in Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj) . |
| 439 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die cast Alluminium housing with high quality frosted diffuser for glare free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 440 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 441 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg. in Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) The luminaire should be Replacement Warranty will be 2 years |
| 442 | S/F of Street light 45W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66,IK 08 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 443 | Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc |
| 444 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439 3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make LEGRAND Ekinox3 DB/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS as per direction of Engg. in Charge. The Distribution boards should be Replacement Warranty will be 3 years.4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439 3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43 IK09 with metal door warranty on DB is 3 years |
| 445 | Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years |
| 446 | Supplying and fixing 63Amps 4P 415 volts MCB (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. Warranty on MCB is 1 years. |
| 447 | Supplying and fixing 40Amps 4P 415 volts, MCB (Make Legrand DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB SB 200/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years |
| 448 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 years. |
| 449 | Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA (Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg. in Charge. The RCCB should be Replacement Warranty will be 1 years. |
| 450 | Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make LEGRAND DX3 / Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB complete with connections as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years. |
| 451 | Supplying and fixing 6 32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9/ ABB ITUS) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg. in Charge. The MCB should be Replacement Warranty will be 1 years.. |
| 452 | S/I/T&Commissioning of Main LT indoor floor mounted CPRI Tested cubical type Main panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg. in Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list. 20X10MM Separate Aluminium Earth bus bar should be installed.All the incomers shall have 40 kA 3P+N type 2 SPD with 63 A 4P MCB, C series, 10 kA. Mandatory provision of cable alley is to be given. ON/OFF/TRIP indication shall be given for all the feeders. |
| 453 | Incommer 1 One no 100A 4P MCCB 16kA,C series with on/off trip indication Light load for each floor. ( Make LEGRAND DPX3 / Siemens 3VA Model/ Schneider CVS)Busbar 04 numbers of 200Amps AL busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going 04 nos 40 63A 4P MCB 10kA,C series Light load to LDBs . (Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9) Out going 02 nos 40 63A DP MCB 10kA,C series Light load to LDBs . (Make LEGRAND DX3/ Siemens Betaguard/ Schneider Acti 9)Instrument (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.(ii) 01 set of 0 100Amps Ammeter with CTS. (DIGITAL)(Sicure/ L&T, CT KAPPA or equievalant make & model)(iii) 01 set of 0 500 voltmeter. (DIGITAL)(Secure/ L&T or equievalant make & model)Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)4C X 25 sqmm |
| 454 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 455 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25 sq. mm |
| 456 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4C X 25 sqmm |
| 457 | Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge. |
| 458 | Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required. |
| 459 | Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.as per direction of Engg. in Charge. |
| 460 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit |
| 461 | SITC of Cat6 I/O with Single Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold greater than 0.8 micro meter. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94 V O certified. Make: Systimax/ Legrand/ Panduit |
| 462 | SITC of Cat 6, 24 port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit |
| 463 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 464 | SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA 568 C.2 Standard. Supports Data Networks Speeds Up to 10/100 Base T and 1000 Base T. Available In LSZH Jacket Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50micro Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 465 | Supply of 8 Port Gigabit Smart Managed PoE Switch with 8 × 10/100/1000 Mbps PoE ports and minimum 4 × Gigabit Combo (RJ45/SFP) ports, supporting PoE output up to 30W per port with minimum total PoE power budget of 140W, compliant with IEEE 802.3af/at standards, having PoE forwarding capacity not less than 17.86 Mpps and switching capacity not less than 24 Gbps, equipped with minimum 8K MAC address table and jumbo frame support up to 10K bytes, supporting IEEE 802.1Q VLAN and Access Control List (ACL), operating on AC power supply 100 240V, 50 60 Hz with minimum 6kV input surge protection, suitable for rack mounting with approximate dimensions 330mm × 230mm × 44mm, complete with all necessary accessories, mounting hardware including 3 years comprehensive warranty. Make: Digisol, Netgear, Cisco, HP |
| 466 | SITC of 1G LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 467 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173 1:2002 / IEC 60794 1/IEC 60793 2 50 class B1.3 / EN 60793 2 50: class B1.3 / ITU Recommendation G.652.D the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 468 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19 ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR 326 Core . Make: Systimax/ Legrand/ Panduit |
| 469 | SITC of OFC Patch Cor, SM (OS2), Duplex LC SC, LC LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : less than= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PCgreater than= 45db, UPCgreater than=50db, APCgreater than=60db. Make: Systimax/ Legrand/ Panduit |
| 470 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068 2 11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian Standard 06 Socket Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand |
| 471 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell Value series/Pelco/Axis/Bosch |
| 472 | Supplying and fixing of following sizes of HMS PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg. in Charge. Make AKG/ BEC/ Precision/ Norpak/ Kinjal. (Only for data/ telephone/ CCTV)25 mm |
| 473 | 20 mm |
| 474 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 475 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 476 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R 32/R 410/ R 407 Green Refrigerant, wireless Remote control, suitable for working between 180 260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . 5 Star Inverter Type Cooling only 1.5 TR with 5 Star BEE Rating (LG AS Q20JWZE/ O General ASGG18CGWA B/ Daikin FTKU50XV16) |
| 477 | 2.0 TR with 5 Star BEE Rating (O General ASGG24CGWA B/ Daikin FTKM60XV16) |
| 478 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job.1.5/2.0 TR high wall split A.C |
| 479 | Supply,installation of hard/soft copper refregrant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 480 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job.25mm nom. Dia pipe |
| 481 | Supply and fixing of 4kVA Voltage stabilizer (130V 270V)ISI marked(Make V Guard/ Microtek) |
| 482 | S/F of 5KVA Voltage stabilizer (130V 270V)ISI marked (Make: V Guard/ MICRO TECH). |
| 483 | S/F of Street light 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5 Years Warranty) |
| 484 | Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee/Valmount as per direction of Engg. in Charge. |
| 485 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 486 | Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg. in Charge. |
| 487 | Supplying ,installation & fixing of 10 11W(BOLLARD), High efficient LED with extruded Aluminium housing with PC diffuser.CRIgreater than70, IP65, CCT 6500K, Ambient temp 0 to 45DegC, Driver efficiencygreater than80%, THDless than25%, Powerfactor greater than 0.9, Surge protection 4 kV, Multistage Isolated Constant Current Constant Voltage driver and Safety Extra Low Voltage Safe levelless than60V DC as per IEC standard. Luminaire efficacy greater than equal to (90 lm/W). Make Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) including with foundation as per the Drawing for inspection as required & as per direction of Engg. in Charge. |
| 488 | External Feeder Pillar for External LightingS/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing Make Legrand DX3/ Siemens Betaguard/ Schneider Acti 9/ABB SB200 as per direction of Engg. in Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materialsPANEL AS ABOVE |
| 489 | SITC of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer in charge.The entire earthing system should be Replacement Warranty will be 2 years |
| 490 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg. in Charge. |
| 491 | Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make: Polycab/ Havells/ KEI/ Gloster/ Finolex/ RR Kabel)4 core x 10 sq mm |
| 492 | 4core x 16 sq mm |
| 493 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg. in Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 494 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required.Upto 25sqmm |
| 495 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade of following size direct in ground in the EXISTING PIPE etc as required as per direction of Engg. in charge.Upto 25sqmm |
| 496 | Supply & Making end Termination with brass double compression gland and Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) (Make: Raychem/ M seal/ 3M)4 core x 10sq mm |
| 497 | 4 core x 16sq mm |
| 498 | SITC of outdoor type double jacketed 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA 568 C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from 20° to +70°C Cable support Conductor Resistance less than equal to 9.38 ohm/100m Max., Cable support Delay Skew: less than 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 ohm @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit. |
| 499 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low Light IR motorized Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 70m(bullet)/50m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.7 13.5mm motorized, Field of View FoV H:100 28.5°, V:73 21.4°, BLC, HLC, WDR, 2D/3DNR, White Balance Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES 128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : 30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130 4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make Honeywell value series/Pelco/Axis/Bosch |
| 500 | SITC of Industrial Ethernet L2 Managed PoE switch with 8 Giga PoE ports and2 Gigabit SFP uplink port ,Switch should have IP40 grade protection, support DinRail Mount, MTBF of the switch should be higher than 80000 hours, Switching capacity 20 Gbps , Mac Address 8 k , Forwarding rate 15 Mpps , Power Budget 240W , IEEE802.3af/at standard, maximum 30W PoE power of single port, Should support Web interface , Console port (RJ 45/RS232), Telnet interface ,self healing ring network between any two ports, and supports multiple Independent self healing rings, Operating Temperature of the switch should be within 40~85 deg Centigrades, TEC certified under MTCTE,power input of DC48~55V . Make: Digisol, Netgear, Cisco, HP |
| 501 | Supplying and fixing Outdoor Pole/ Wall mount 6U Rack, IP55, Front Door with Filter, Louver & Unique key Lock. 3 Socket PDU 5Amp 1 No. Self adhesive thermal foam from inside. Hood For Air Inlet at front side.1U Cantilever Tray 250mmDepth, Gasket. etc complete as required. |
| 502 | Supply and fixing of P6 Outdoor LED display of dimension 8x6 ft with receiving card, sending card processor , power supply outdoor MS Cabinet, ACP Power, outdoor IP66 sound system with amplifier and speaker, 8 feet monopole with RCC foundation in complete as per the direction of Engineer incharge.Warranty shall be 3 years. Make Delta/ Reputed ISI Marked manufacturer |
| 503 | Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 32 mm dia |
| 504 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg. in Charge. 50 mm dia |
| 505 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. In Ground Floor 20mm dia C PVC pipe |
| 506 | 25mm dia C PVC pipe |
| 507 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM D 1785/89 (Sch 80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch 80) |
| 508 | 40mm dia PVC ASTM pipe (sch 80) |
| 509 | Supplying all materials, labour, T&P and fitting and fixing U PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer in charge. 110mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 510 | 80mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 511 | 110mm U PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 512 | 110mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 513 | 110mm U PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 514 | 110mm U PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 515 | 110mm U PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 516 | 110mm U PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 517 | 110mm U PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 518 | 110mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 519 | 75mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 520 | 75mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 521 | 110mm PVC SWR Clamp/clip(Ori Plast/Finolex/Supreme Make) |
| 522 | Supply,Providing, fixing, testing and commissioning in position UV stabilised 110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type A). In case of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge.110 mm diameter. .(Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)110 mm dia PVC (IS:13592, Type A) |
| 523 | Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes 110 mm dia.150 mm x 150 mm.dia CI Grating (Parryware/ Hindware/Grohe/Jaguar) |
| 524 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer in chargeEuropean water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 525 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres PVC L.L. Cistern with flush bend . (Parryware/ Hindware/Cera/Jaguar) |
| 526 | Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet Bowl For Rimless Wall Hung WC With UF Soft Close Seat Cover, Hinges, Accessories Set, Size: 390x570x365 mm, (European type water closet EWC) with integral \\"P\\" or \\"S\\" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer in charge.Wall Hung European Water Clost \\"P\\" trap.(Hindware/Parryware/Jaguar) |
| 527 | Single Piece Slim Concealed Cistern Body with Installation Kit & drain pipe connection set for Wall Hung WC (without Flush Control Plate) |
| 528 | Flush Plate CUTE |
| 529 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. (Parryware/ Hindware/Cera/Jaguar)Halfpedestal basin(560x450)Hindware No 11038 SW |
| 530 | 32mm dia PVC waste pipe with brass coupling nut (Astral/Finolex/Industries/AKG/Supreme/Ashirbad) |
| 531 | 15mm dia PVC inlet connection pipe 0.45m long (Astral/Finolex/Industries/AKG/Supreme/Ashirbad) |
| 532 | Supplying all materials, labour, T&P and fixing Cera Quatrino 24x18 inch Stainless Steel Single Bowl Kitchen Sink, Matt Finish, Top Mount, 1.0 mm Thick, Grade: 304 including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia ss waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. (610x457x250 mm) stainless Steel kitchen sink |
| 533 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (C.P.fittings are Jaquar /Parryware/ Hindware).15mm dia CP 2way bib cock |
| 534 | 15mm dia CP Health faucet |
| 535 | 15mm dia CP Angle stop cock |
| 536 | 15mm dia CP Sink cock |
| 537 | 15mm dia CP Sink cock |
| 538 | 15mm dia CP extension piece |
| 539 | PVC Connection Pipe |
| 540 | PVC Discharge Pipe |
| 541 | 15mm dia. C.P flange |
| 542 | 125mm dia CP gratting |
| 543 | Supplying all materials,labour,T&P and fixing standard sized Glass shelf, Towel Rail, Towel Ring, Soap Holder, Soap dispenser with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer in charge. 600mmx125mm size glass shelf with C.P ruard Rail. |
| 544 | C P Towel Ring (Parryware/ Hindware/Cera/Jaguar) |
| 545 | C P Soap Dispenser. (Euronics/Bobric/Sloan/Prestge/Nirali) |
| 546 | C P Toilet Roll Holder. (Parryware/ Hindware/Cera/Jaguar) |
| 547 | Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook alongwith all necessary accessories complete including cutting, making good the walls, floors, slab wherever complete in all respect as per specification and direction of the Engineer in charge. (Parryware/ Hindware/Cera/Jaguar) |
| 548 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 549 | Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Zoloto/Advance/CRI/Sant/Kartar)25mm dia Brass F.W valve |
| 550 | 32mm dia Brass F.W valve |
| 551 | 32mm dia CPVC Ball valve |
| 552 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope) NP3 RCC Hume pipes are medium duty, non pressure pipes used for sewers and irrigation conforming to IS:458/2003. Including jointing with supply of approved solvent cement by non heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia U PVC pipe NP 3. (Hume/K.K Spun/J.K Spun/Pragati Concrete/Sood & Sood) |
| 553 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and removing the debris with in 50. m Lead etc complete. |
| 554 | Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead . |
| 555 | Dismanteling & removing old tile cladding from walls(dado) including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 556 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. |
| 557 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor |
| 558 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. |
| 559 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. |
| 560 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer in charge .250mm to 375mm thick wall |
| 561 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer in charge . |
| 562 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 563 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge . |
| 564 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 565 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles (S & P IVORY MATT) of sizes 600x600 mm in floors confirming to (IS 15622:2017) on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per direction of Engineer in charge. (Antiskid Tile flooring size 60cmx60cm approved by the Engineer in charge) |
| 566 | Supplying all materials, labaour, T&P and fixing ceramic floor tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer in charge.(ceramic vitrified Glazed tiles in wall of size 300x600 ) of make Johnson/Kajaria/Somany/Orient Bell/Rak) plain/printed series to be pre approved by the Engineer in charge. |
| 567 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer in charge. |
| 568 | Providing and applying Plastic Bison Emulsion paint of approved make & in approved shade conforming to IS: 15489 . Applying 2 coats of paint with roller to all internal walls at all levels over a coat of water based BP White primer / Alkali resistant primer including preparation of surfaces by cleaning .Surfaces so prepared shall be completely dry and free from dust before painting is commenced. Scaffolding, labor, tools, tackles, equipment etc complete to achieve a smooth, even and consistent surface |
| 569 | Finishing plastered surfaces of walls with Bw Waterproof Wallseal putty of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer in charge. |
| 570 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick of required size comprising of virgin polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be paid separately) (DAR 2023 vol 1,Cl 26.88, pg 2037) |
| 571 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer In Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 45 x 85 mm (DAR Cl. 26.86.2) FRAME 2 x 2.85 |
| 572 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia C PVC pipe |
| 573 | 25mm dia C PVC pipe |
| 574 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM D 1785/89 (Sch 80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch 80) |
| 575 | 40mm dia PVC ASTM pipe (sch 80) |
| 576 | Supplying all materials, labour, T&P and fitting and fixing U PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer in charge. 110mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 577 | 80mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 578 | 110mm U PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 579 | 110mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 580 | 110mm U PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 581 | 110mm U PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 582 | 110mm U PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 583 | 110mm U PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 584 | 110mm U PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 585 | 110mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 586 | 75mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 587 | 75mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 588 | 110mm PVC SWR Clamp/clip(Ori Plast/Finolex/Supreme Make) |
| 589 | Supply,Providing, fixing, testing and commissioning in position UV stabilised 110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type A). In case of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge. 110 mm diameter. (Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)110 mm dia PVC (IS:13592, Type A) |
| 590 | Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes 110 mm dia.150 mm x 150 mm.dia CI Grating (Parryware/ Hindware/Grohe/Jaguar) |
| 591 | Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer in charge .580mmx440mm size Orissa Pan (White) (Kohler/Grohe/Roca/Jaguar) |
| 592 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer in chargeEuropean water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 593 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres PVC L.L. Cistern with flush bend . (Parryware/ Hindware/Cera/Jaguar) |
| 594 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. (Parryware/ Hindware/Cera/Jaguar)Halfpedestal basin(560x450)Hindware No 11038 SW |
| 595 | 32mm dia PVC waste pipe with brass coupling nut (Astral/Finolex/Industries/AKG/Supreme/Ashirbad) |
| 596 | 15mm dia PVC inlet connection pipe 0.45m long (Astral/Finolex/Industries/AKG/Supreme/Ashirbad) |
| 597 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (C.P.fittings are Jaquar /Parryware/ Hindware).15mm dia CP 2way bib cock |
| 598 | 15mm dia CP Health faucet |
| 599 | 15mm CP Revolving shower with shower Arm. |
| 600 | 20mm dia 2Way Wall Mixture |
| 601 | 15mm dia CP Angle stop cock |
| 602 | 15mm dia CP Pillar cock |
| 603 | 15mm dia CP extension piece |
| 604 | PVC Connection Pipe |
| 605 | PVC Discharge Pipe |
| 606 | 15mm dia. C.P flange |
| 607 | 125mm dia CP gratting |
| 608 | Supplying all materials,labour,T&P and fixing standard sized Glass shelf, Towel Rail, Towel Ring, Soap Holder, Soap dispenser with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer in charge. 600mmx125mm size glass shelf with C.P ruard Rail. |
| 609 | C P Towel Ring (Parryware/ Hindware/Cera/Jaguar) |
| 610 | C P Soap Dispenser. (Euronics/Bobric/Sloan/Prestge/Nirali) |
| 611 | C P Toilet Roll Holder. (Parryware/ Hindware/Cera/Jaguar) |
| 612 | Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook alongwith all necessary accessories complete including cutting, making good the walls, floors, slab wherever complete in all respect as per specification and direction of the Engineer in charge. (Parryware/ Hindware/Cera/Jaguar) |
| 613 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 614 | Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Zoloto/Advance/CRI/Sant/Kartar)25mm dia Brass F.W valve |
| 615 | 32mm dia Brass F.W valve |
| 616 | 32mm dia CPVC Ball valve |
| 617 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope) NP3 RCC Hume pipes are medium duty, non pressure pipes used for sewers and irrigation conforming to IS:458/2003. Including jointing with supply of approved solvent cement by non heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia U PVC pipe NP 3. (Hume/K.K Spun/J.K Spun/Pragati Concrete/Sood & Sood) |
| 618 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and removing the debris with in 50. m Lead etc complete. |
| 619 | Dismanteling & removing old tile flooring including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead . |
| 620 | Dismanteling & removing old tile cladding from walls(dado) including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 621 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. |
| 622 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floorGround floor |
| 623 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. |
| 624 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. |
| 625 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer in charge .250mm to 375mm thick wall |
| 626 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer in charge . |
| 627 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 628 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge . |
| 629 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 630 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles (S & P IVORY MATT) of sizes 600x600 mm in floors confirming to (IS 15622:2017) on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per direction of Engineer in charge. (Antiskid Tile flooring size 60cmx60cm approved by the Engineer in charge) |
| 631 | Supplying all materials, labaour, T&P and fixing ceramic floor tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer in charge.(ceramic vitrified Glazed tiles in wall of size 300x600 ) of make Johnson/Kajaria/Somany/Orient Bell/Rak) plain/printed series to be pre approved by the Engineer in charge. |
| 632 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer in charge. |
| 633 | Providing and applying Plastic Bison Emulsion paint of approved make & in approved shade conforming to IS: 15489 . Applying 2 coats of paint with roller to all internal walls at all levels over a coat of water based BP White primer / Alkali resistant primer including preparation of surfaces by cleaning .Surfaces so prepared shall be completely dry and free from dust before painting is commenced. Scaffolding, labor, tools, tackles, equipment etc complete to achieve a smooth, even and consistent surface |
| 634 | Finishing plastered surfaces of walls with Bw Waterproof Wallseal putty of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer in charge. |
| 635 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick of required size comprising of virgin polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be paid separately) (DAR 2023 vol 1,Cl 26.88, pg 2037) |
| 636 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer In Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 45 x 85 mm (DAR Cl. 26.86.2) FRAME 11 x 2.85 |
| 637 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and removing the debris with in 50. m Lead etc complete. |
| 638 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick of required size comprising of virgin polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be paid separately) (DAR 2023 vol 1,Cl 26.88, pg 2037) |
| 639 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer In Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 45 x 85 mm (DAR Cl. 26.86.2) FRAME 12 x 2.85 |
| 640 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. |
| 641 | Supply,Providing, fixing, testing and commissioning in position UV stabilised 110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type A). In case of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge.110 mm diameter. .(Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)110 mm dia PVC (IS:13592, Type A) |
| 642 | Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes 110 mm dia.150 mm x 150 mm.dia CI Grating (Parryware/ Hindware/Grohe/Jaguar) |
| 643 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. Ground Floor 20mm dia C PVC pipe |
| 644 | 25mm dia C PVC pipe |
| 645 | In Terrace Floor 25mm dia C PVC pipe |
| 646 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM D 1785/89 (Sch 80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.32mm dia PVC ASTM pipe (sch 80) |
| 647 | Supplying all materials, labour, T&P and fitting and fixing U PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer in charge. 110mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 648 | 80mm U PVC SWR Pipe (Ashirvad/Supreme Make) |
| 649 | 110mm U PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 650 | 110mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 651 | 110mm U PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 652 | 110mm U PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 653 | 110mm U PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 654 | 110mm U PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 655 | 110mm U PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 656 | 110mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 657 | 75mm U PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 658 | 75mm U PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 659 | 110mm PVC SWR Clamp/clip(Ori Plast/Finolex/Supreme Make) |
| 660 | Supply,Providing, fixing, testing and commissioning in position UV stabilised 110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type A). In case of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge.110 mm diameter. .(Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)110 mm dia PVC (IS:13592, Type A) |
| 661 | Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes 110 mm dia.150 mm x 150 mm.dia CI Grating (Parryware/ Hindware/Grohe/Jaguar) |
| 662 | Matrix Set 1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm) (Hindware/ cera/ Parryware) |
| 663 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (C.P.fittings are Jaquar /Parryware/ Hindware).15mm dia CP extension piece |
| 664 | PVC Connection Pipe |
| 665 | PVC Discharge Pipe |
| 666 | 15mm dia. C.P flange |
| 667 | 125mm dia CP gratting |
| 668 | Supplying all materials, labour, T&P and fitting and fixing G.M/ Brass fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. (Zoloto/Advance/CRI/Sant/Kartar)25mm dia Brass F.W valve |
| 669 | 32mm dia Brass F.W valve |
| 670 | 32mm dia CPVC Ball valve |
| 671 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor |
| 672 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.In Ground Floor |
| 673 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor |
| 674 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer in charge .250mm to 375mm thick wall Ground Floor |
| 675 | Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge. |
| 676 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .In ground floor 8.35x0.08 |
| 677 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .In ground floor 8.35x0.05 |
| 678 | Providing and installing two component acrylic modified cementitious waterproofing coating with masterseal 551/ Equivalent over roof slab after carring out pond test on roof slab filling all defects. Saturating the surface mixing the products and then application in 2.0 mm thickness (1.8kg/sqm coverage rate for 1.0mm thickness) in suitable layers complete in all respect all material, tools, plant & labour complete in all respect. Density 1850kg/m3, mix ratio (Powder to liquid ) 3.1 by weight water.Gorund floor(Flooring) Floor Tile Area 8.35 (Dado) (22.71/3.0)x0.45 = 3.41 4.94 |
| 679 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 680 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles (S & P IVORY MATT) of sizes 600x600 mm in floors confirming to (IS 15622:2017) on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per direction of Engineer in charge. (Antiskid Tile flooring size 60cmx60cm approved by the Engineer in charge) |
| 681 | Supplying all materials, labaour, T&P and fixing ceramic floor tiles in dados skirting on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed ith pigments to match the shades of the tiles etc. complete as per direction of the Engineer in charge.(ceramic vitrified Glazed tiles in wall of size 300x600 ) of make Johnson/Kajaria/Somany/Orient Bell/Rak) plain/printed series to be pre approved by the Engineer in charge.Ground Floor 16mm Plaster area (32.27/3.0)x2.1=22.71 |
| 682 | Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer in charge.Ground Floor 16mm Plaster area (32.27/3.0)x1.45=15.60 |
| 683 | Providing and applying Plastic Bison Emulsion paint of approved make & in approved shade conforming to IS: 15489 . Applying 2 coats of paint with roller to all internal walls at all levels over a coat of water based BP White primer / Alkali resistant primer including preparation of surfaces by cleaning .Surfaces so prepared shall be completely dry and free from dust before painting is commenced. Scaffolding, labor, tools, tackles, equipment etc complete to achieve a smooth, even and consistent surfaceGround Floor Qnty. Same as Cement Primer 15.60 |
| 684 | Finishing plastered surfaces of walls with Bw Waterproof Wallseal putty of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer in charge. Ground Floor Qnty. Same as Cement Primer 15.68 |
| 685 | Two track, two panel sliding door (2 nos. PVC panels) made with frame 62x50 mm and door sash 50x79 mm, both having wall thickness of 2.5 mm (±0.2 mm), and fitted with single glazing bead of appropriate dimension |
| 686 | Supplying all materials,labour,T&P and laying in trenches ( to level or slope) NP3 RCC Hume pipes are medium duty, non pressure pipes used for sewers and irrigation conforming to IS:458/2003. Including jointing with supply of approved solvent cement by non heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type C 1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.150mm dia NP 3. (Hume/K.K Spun/J.K Spun/Pragati Concrete/Sood & Sood) |
| 687 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 688 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, Ground class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 600mmx600mmx450mm |
| 689 | Dismantling & removing Septic TankDismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 690 | Construction of 30 User RCC septic tank 1 No.Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer in Charge. |
| 691 | do with addl. Depth of 1.5 m |
| 692 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer in chargeIn ground floor |
| 693 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer in charge.In ground floor |
| 694 | Supplying all materials, labour, T&P and providing cement concrete (1:1:2) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 695 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 696 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 697 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 698 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 699 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge |
| 700 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 701 | Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 702 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U PVC SWR pipe |
| 703 | 110mm dia U PVC Plain shoe bend |
| 704 | 110mm dia U PVC Cowl |
| 705 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 706 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender