Tender For Repairs And Maintenance Of Minicoy North Lighthouse, In The Ut Of Lakshadweep.
Tender Value
15.12 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
30247
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lakshadweep District → Lakshadweep
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance Of Minicoy North Lighthouse, In The Ut Of Lakshadweep.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared, including supply of all materials, labour, tools & plants etc complete as directed. |
| 2 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks,tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 15043 having compressive strength Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat.including supply of all materials, labour, tools & plants etc complete as directed. |
| 3 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer in charge.With cement mortar 1:4 (1 cement : 4 fine sand) including supply of all materials, labour, tools & plants etc. complete. |
| 4 | 12 mm thick cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including cost of all materials, labours, tools & plants, scaffolding etc. complete as directed. |
| 5 | Painting with two coat of Synthetic enamel paint (Asian / Berger) of approved quality and color( Black & White ) to exterior of tower after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, scaffolding etc. complete. |
| 6 | Painting two coat of Synthetic enamel paint (Asian / Berger) of approved quality and color to interior of tower after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, scaffolding etc. complete. |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 8 | Painting two or more coats of floor enamel paint of approved brand and manufacture of required colour to give an even shade after, cleaning all dirt, dust, sand papering, wherever directed , including cost of all , labour, tools, etc. complete. |
| 9 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work supply of all labours,materials ,tools & plants ,scaffolding etc complete as directed. |
| 10 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.- Upto 5mm depth and 5 mm width. |
| 11 | Replacing broken glass panes with 4mm thick pinhead glaqss panes with wooden fillets where ever necessary after removing the old damade glass etc complete as directed including cost of all materials, labour, tools & plants ,scaffolding . |
| 12 | Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete as directed including cost of all materials, labour, tools & plants etc complete as directed .- 100x70x4 mm (ordinary type). |
| 13 | Providing and fixing 300x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 14 | Providing and fixing 100mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 15 | Providing and fixing 100x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 16 | Providing and fixing aluminium casement stays, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as directed including cost of all materials, labour, tools & plants. |
| 17 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete as per manufacturer’s specification etc complete as directed including removing old frame, cost of all materials, labour, tools & plants. |
| 18 | Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, etc complete as directed including cost of all materials, labour, tools & plants. |
| 19 | Providing and fixing Lighthouse display board of size 2.00x1.20m, of 25mm GI square tube allround frame work with an intermediate section of 1.20m length, 2 vertical legs of 50mm C Class GI pipe - 3.90m total height,stay pipe of 50 mm C Class GI pipe of 1.9 mtr length on both legs and base to be made up with ACP sheet 4mm thick over which matter to be printed in trilingual on vinyl sheet of superior quality and to be pasted on board, board to be fitted at suitable place with necessary cement concrete, excavation for foundation and painting two coat of epoxy paint above a coat of epoxy primer, as directed including cost of all materials, labour, tools & plants and transportation charges, scaffolding etc complete. |
| 20 | Providing and fixing Lighthouse direction board of size 0.90 x 0.50m, made out of ISA 50x50x5mm allround frame work, vertical leg of 50mm GI pipe - 2.30m total height, base to be made up with Aluminium sheet of 18 gauge over which matter to be printed in trilingual on vinyl sheet of superior quality and to be pasted on board, board to be fitted at suitable place with necessary cement concrete, excavation for foundation and painting two coat of epoxy paint above a coat of epoxy primer, as directed including cost of all materials, labour, tools & plants and transportation charges, scaffolding etc complete. |
| 21 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead, including cost of all materials, labour, tools & plants etc complete. |
| 22 | Providing and fixing of heavy duty G.I. pipes hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.including supply of all materials, labours , tools & plants,scaffolding etc. complete. |
| 23 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of all materials, labour etc complete as directed. |
| 24 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge including of all materials, labour, tools & plants,scaffolding etc., complete . |
| 25 | Greasing the tower foundation bolt and nuts with grease after cleaning and removal of rust, dust etc and covering with tarpauline including cost of all materials, labour etc complete as directed. |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns etc . including cost of all materials, labour, tools and plants etc complete. |
| 27 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) including of all materials, labour, tools & plants,scaffolding etc., complete . |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 29 | Earth work in all kinds of soil surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge. including cost of all materials, labour, tools & plants etc., complete . |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) including cost of all materials, labour, tools & plants etc., complete . |
| 31 | Providing and laying in cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including cost of all materials, labour, tools & plants etc., complete . |
| 32 | Hire charges of mechanized boat 30 / 35 feet from Minicoy Jetty to anchorage point of ship & return for the transportation of men & materials, embarkation & disembarkation of dept officials from ship for the work including cost of all labour, fuel charges etc complete. |
| 33 | Recovery of Scrap value for old dismantled/ removed steel work (old main gate) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender