Tender For Provn Of Pyrotechnic Store And Certain B/R Works At Alg Along Under Ge (Af) Mohanbari
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
8 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Pyrotechnic Store And Certain B/R Works At Alg Along Under Ge (Af) Mohanbari
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | Revised BOQ | BOQ | 22-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | Excavating over areas n.exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed. |
| 4 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation/ mass concrete complete all as specified and directed. |
| 6 | M&L for RCCM-25 (design mix), footings, foundation beams, Plith beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L for RCC (M-25 design mix) in columns, Piller, Piers, post and structs etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L for RCC (M-25) Design Mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 9 | M&L for RCC M-25 (design Mmx) as inbeams, Cantilevers, brussesmers, lintels over 1.5 m span etc complete all as specified and directed. |
| 10 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed. |
| 11 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finish surfaces in rectangular, square or pentagolnal complete all as specified and directed. |
| 12 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed. |
| 13 | M&L for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed. |
| 14 | M&L for Formwork for rough finished flat surface of concrete to chullah hoods, chajjas troughs and similar items including edges complete all as specified and directed. |
| 15 | M&L for Polythene film, black 50mm micron applie d Bitumen blown any grade.appled hot, two coats to concrete surfaces at the rate of 1.5 Kg/ Sqm per coat complete all as specified and directed. |
| 16 | M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | All as item No 16 above here in before but 6-8 mm dia and over as in stirrups,spacers and binder etc complete all as specified and directed. |
| 18 | M&L for Brick Masonry with subclass \\"B\\" bricks, straight or curved on plan exc 6M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 19 | M&L for rendering (12+8) mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete sur faces even and smooth without using extra cement complete all as specified and directed. |
| 20 | M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete sur faces even and smooth without using extra cement with using water proofing compound complete all as specified and directed. |
| 21 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 22 | M&L for treating the backfill incontact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surfaces complete all as specified and directed. |
| 23 | M&L for treating the soil under plinth protection at the rate of 5 ltrs of emulsion per square meter of surface area complete all as specified and directed. |
| 24 | M&L for 40 mm thk Damp Proof Course in cement concrete 1:2:4 type B-0 to horizantal or vertical surfaces including necessary form work complete all as specified and directed. |
| 25 | M&L for Polythene film,black,50mm micron applied Bitumen blown any grade.appled hot, two coats,to concrete surfaces at the rate of 1.5 Kg/ Sqm per coat complete all as specified and directed. |
| 26 | M&L for broken stone or boulder hardcore 150 mm thk of gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 27 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 28 | M&L for 100 mm thick cement concrete type D-2 1:2:4 (using 40 mm graded granite stone aggregate) in flooring/ hard standing finished even and fair surface complete all as specified and directed. |
| 29 | M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded granite stone aggregate) as in sub base/ Plinth protection finished even and fair surface complete all as specified and directed. |
| 30 | M&L for machine cut jota stone slab flooring 20-25mm thick over 20mm thk cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. |
| 31 | M&L for kota stone slab 20-25mm thick in rise of steps, skirting, dado and pillar jointed with with grey cement slurry mixed with pigment to match the shade of slab including 10mm thk bedding layer (1:4), rubbing and polishing complete all as specified and directed. |
| 32 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded over 20mm thk cement screed base (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shades of granite stone including grinding, rounding to noses and polishing complete all as specified and directed. |
| 33 | M&L for 20 mm thk granite (of any type) tiles machine cut in skirting/ dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 34 | M&L for preparation of new plastered surfaces(external) of walls and applying two coats of exterior emulsion weather proof paint in camoflage pattern over a coat of primer complete all as specified and directed. |
| 35 | M&L for preparing new surfaces(internal) and applying two coats of distempering walls with distemper oil emulsion, white or tinted complete over chalk whitening, on plastered surfaces including 1mm thk wall care putty for smooth surface to internal walls complete all as specified and directed. |
| 36 | M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 37 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 38 | M&L for provideed,cement concrete type B1 1:2:4 using 20mm graded aggregate in roof kerb or mud stops, rounded or chamfered on edge in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 39 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum in soft/ loose soil, getting out, returning,filling in and ramming earthor brilen rubble mixed with earth around, inlayers n.exc 25 cm, eatering and removing surplus soil to a distance n.exc 50mtr and making good surface complete all as specified and directed. |
| 40 | S&F mild steel works as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire fencing/chain link fencing etc flat iron fillets (for securing chain link fencing etc) including all necessary drilling, bolting or reveting, welding etc and embeding in concrete and securing etc. and similar works conforming to Fe- 290 Gde E-165 complete all as specified and as directed. |
| 41 | S&F for framed work such as framed and hungs as gates ,including pintle hingues, stops, hand made sliding bolts.etc conforming to Fe290 Gde E-165 complete all as specified and directed. |
| 42 | S&F for Galvanised 2 strand,steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- long bolts,including,sceuring or typing at crossing with and provision of galvanised mild steelwire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed. |
| 43 | Fixing only chain link fencing including wires,any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 44 | Supply only chain link fencing MS galvanised any size and type complete all as specified and directed. |
| 45 | M&L for precast cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in landing, cover slabs, chullah hoods, chajjahas, water troughs,mangers, shelves and similar article with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 46 | M&L for preparation of new surfaces steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and directed. |
| 47 | M&L for preparation of plastered/ concrete surfaces of Bldg roofs & tarraces, parapets, sunshades and exterior walls by brushing/ brooming/ blowing and applying HS Roof Kool & Seal fibre reinforeced liquid applied elastomeric waterproofing membrane ,impregneated with nano-fibre and formulated with PU-Acrylic Hybrid Polymer complete all as specified and directed.(a) Method of Application:-(i) The surface to be applied should be clean & sound, free from any kind of contamination, dirt, tar/ bitumen coating etc. (ii) Oil & Greese must be removed using degreasing solvents.(iii) Any damaged surface must be repaired by using crack fillers or polymer modified repair mortar using ADVANCED LATES PLUS as per Manufacture direction.(b) Angular fillets: -Hampering of junction of any right -angled corner ( 50mm x50mm) & repairing the same using polymer modified mortar in1:4 ratio (cement sand) admixed with HS Advanced Latex Plus @3% by weight of cement.(c) Application of Primer:- Providing and applying single coat of HS PU Roof Kool& seal using brush/ roller after diluting the water in 40% ratio by volume (as per manufactures specification ) as the primer coat allow the primer to dry for 3-4 hours prior to waterproofing coating application.(d) Application of HS Roof Kool & Seal :- providing and applying two coats of HS Roof kool & Seal (Non -diluted )up to vertical wall 300 mm. Retention 4-5 hours. One component water based ,high soild, UV resistant hybrid Polyurethane membrane with 300% elongation,as per ASTM D412, for long lasting waterproofing SRI 107. |
| 48 | HORIZANTAL WATERPROOFING:- ( By using :-HS Roof Kool & Seal Product)Stage Dliution Tool Inter coat period Forced coverage(Composite system)Self priming 40% with Hard brush 3-4 Hrs potable water / RollerWater proofing Undiluted - 4-6 Hrs 1.0-1.1 sqm/ltr 1st coat (for 03 coats application)Water proofing Undiluted - 4-6 Hrs 1.0-1.1 sqm/ltr 2nd coat (for 03coats application)The cured applied system shall achieve a total dry film thickness of 450-500 microns.VERTICAL WATERPROOFING:- ( By using :-HS Roof Kool & Seal Product)Stage Dliution Tool Inter coat period Forced coverage(Composite system)Self priming 50% with Hard brush 3-4 Hrs potable water / RollerWater proofing Undiluted - 4-6 Hrs 1.65-1.85 sqm/ltr 1st coat (for 02coats application) |
| 49 | M&L for rendering 20 mm thick plaster on concrete surfaces or on fair faces of brick work in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed. |
| 50 | S&F for steel doors including projecting type hingues,steel handles, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 51 | Excavation over areas n.exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 52 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 53 | M&L for broken stone or boulder hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 54 | M&L for 150 mm thk cement concrete type B-2, 1:2:4 (20mm graded stone aggregate) as in sub floors,sub bases, floors and paving etc complete including necessary formwork complete all as specified and directed. |
| 55 | M&L for 150 mm thk cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub floors, sub bases, floors and paving etc complete including necessary formwork complete all as specified and directed. |
| 56 | M&L for 25 mm thk cement concrete typeB-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed. |
| 57 | Forming 12 mm rthick expansion joints in 150mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'B' complete all as specified and directed. |
| 58 | Forming contraction joints (Dummy) joints of size 65 mm x 10 mm wide, filled with sealing compound of Grade 'B' complete all as specified and directed. |
| 59 | Finishing surfaces of concrete roads, pavments, by rooming complete all as specified and directed. |
| 60 | Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 61 | M&L for cement concrete in foundations, filling and mass concrete Type C-2 1:4:8 (40 mm graded stone aggregate) complete all as specified and directed. |
| 62 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20mm graded stone aggregate) in foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 63 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 64 | M&L for RCC (Nominal Mix) Type B1 1:2:4 (20mm graded stone aggregate) in walls, retaining walls, basement walls, ballast walls and the lke, any thickness above top of footing, including attached pilasters and buttersses complete all as specified and directed. |
| 65 | M&L for extra forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 66 | Formwork for rough finished surfaces of concrete flat faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed. |
| 67 | M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 68 | All as item No 66 above here in before but 6-8 mm dia and over as in stirrups, spacers and binder etc complete all as specified and directed. |
| 69 | Demolition of Reinforced cement concrete of any description and in any postion not otherwise specificallu provided for complete all as specified and directed. |
| 70 | Demolition of brickwork or stone/boulder masonary built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 71 | M&L for Brick Masonry with subclass \\"B\\" bricks, straight or curved on plan exc 6M mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 72 | S&F for 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hot or cold' with long screwed shank and fly nuts screw for iron pipe complete all as specified and directed. |
| 73 | M&L for 75mm PVC (SWR) floor trap, with grating including jointing with solvent cementcomplete all as specified and directed. |
| 74 | S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls with clamps 110mm bore complete all as specified and directed. |
| 75 | S&F for PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls with clamps 75mm bore complete all as specified and directed. |
| 76 | S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 77 | S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 78 | S&F for PVC (SWR) single T equal or unequal with access door 110mm bore complete all as specified and directed. |
| 79 | S&F for PVC (SWR) single T equal or unequal with access door 75mm bore complete all as specified and directed. |
| 80 | S&F for 40mm dia waste pipe for sinks, basins, etc complete all as specified and directed. |
| 81 | S&F for grating doom 100/125 mm dia of PTMT (Minimum weight 5gms) complete all as specified and directed. |
| 82 | S&F for 20 mm dia GI pipe medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed. |
| 83 | S&F in 15 mm dia GI pipe medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed. |
| 84 | S&F for 15 mm dia bore Stop valves/angle valve, fancy type,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed. |
| 85 | S&F for 20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed. |
| 86 | S&F for 20 mm dia Gun-metal,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 87 | S&F for rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 ltr capacity hoisted and fixed in position with air pipe all as specified including dismantling old one complete all as specified and directed. |
| 88 | M&L for cutting chases for concealed water tubing and making good to facing in cement mortar 1:3, cutting not exceeding 10cm girth complete all as specified and directed. |
| 89 | S&F for 75mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 90 | S&F for vitreous china wash hand basin size 550 x 400mm (flat back or angle back type) including 32mm dia brass chromium plated waste mfittings, a pair if cast iron bracket duly painted/ erecting stand including PVC connection of 450mm length and pinning in ends marking good disturbed surfaces in cement mortar 1:3 including taking down unserviceable wash hand basin and connected items of any descripting complete all as specified and directed. |
| 91 | M&L for 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 92 | S&F for CP Grating doom 125 mm dia (minimum wt 40grms) complete all as specified and directed. |
| 93 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 94 | S&F for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 95 | S&F for waste coupling of 40 mm dia of PTMT (Half or full threaded). (minimum weight 32 mm-45 gms/ 40mm -60 gms) complete all as specified and directed. |
| 96 | S&F for Solid PVC door frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 97 | S&F for factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 98 | M&L for aluminium ventilator frames with frame of section 100mm x 44 mm of thickness 1.6 mm shutters of section 32 mm x 15mm (with and including half portion fixed glazed shutter and rest half portion louvered with glazed shutter) including stainless steel wire mesh, rubber gasket for securing the glass, 5.5 mm thick figured glass, aluminium grill and necessary aluminium mongaries and handles including necessary locking arrangment complete all as specified and directed. |
| 99 | S&F for vitrified ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38 Sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 100 | S&F for Glazed ceramic tiles 350 x 250 x 7 mm 450 x 350 x 7 mm or thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in Coloured cement to match incl sreed bed 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 101 | S&F for 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 102 | S&F for PVC valveless, syphone action type flushing cistern, low level,white with inlet ball valve float and handle 10 ltrs capacity incl brackets in repairs complete all as specified and directed. |
| 103 | S&F for vitreous china wash down water closet pan (pedestal pattern),white (excluding fixing bolts, flushing cistren and flush type) complete all as specified and directed. |
| 104 | S&F for PVC seat cover for EWC of white colour complete all as specified and directed. |
| 105 | S&F for 150 mm bore, PVC (SWR) pipe (minimum 6kg/cm² pressure pipe) single socketed, in any length with rubber ring joints laid in floors or trenches etc including all necessary fittings complete all as specified and directed. |
| 106 | M&L for flame proof concealed point wiring with 1.5 Sqmm (Nominal Area) FR-LSH PVC insulated and unsheathed 1100 V grade multistranded copper conductor single core cable drawn through and including 20 mm dia stove enamelled ERW Steel conduit screwed medium grade with all flame proof fittings and accessories suitable for one light/one fan point controlled by one switch including unsheathed single core standerd copper conductor cable of size 1.5 Sqmm as earth continulty conductor FR-LSH Connected to common earth and earth dolly and to be torminated to boxes as per requirment at site elc. including testing on completion complete all as specified and as directed. |
| 107 | S&F for LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. Make : Crompton Cat Part No EXTN1LT8-16/20-VE/ Sudhir Cat Part No FF/1272/1/20. |
| 108 | S&F for flame proof exhaust fan size 457 mm (18'') 1440 RPM, CFM 4000, single phase, 230 Volts complete all as specified and directed. Make : Sudhir cat part No EF/140. |
| 109 | S&F for switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 110 | S&F for SPN DB 2 way, 230 Volts complete all as specified and directed. |
| 111 | S&F for Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators ccomplete all as specified and directed. |
| 112 | S&F for MCB SPN 32 Amps, 230 volts, C - curve, 10 kA complete all as specified and directed. |
| 113 | S&F for MCB SP 10 to 32 Amps, 230 volts, C curve, 10 kA complete all as specified and directed. |
| 114 | M&L for sub main wiring with 2 run of 2.5 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 2.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non metallic conduit complete all as specified and directed.NOTE : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’.(ii)Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length). |
| 115 | M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x 6.3mm thick electrode and 4mm galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mir deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to Gl wire 4mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board /DB/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 15mm Gl tubing light grade for protection including testing on completion all as shown in Electrical Plate No 3 of SSR Part-l complete all as specified and directed. |
| 116 | S&F for 10 Sqmm twin core cable flat or circular stranded conductor 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed. |
| 117 | S&F for heavy duty metal gong bell (crash bell) size 12\\", Range upto 150 mtr, electrically operated 230 V, 50 Hz complete all as specified and directed. |
| 118 | M&L for point wiring with 1.5 sqmm cable PVC insulated, unsheathed type, copper conductor, multistranded cable (FRLSH Type), 1100 Volts grade (red colour cable for phase and black colour cable for neutral) including 1.5 sqmm copper conductor, multistranded cable (FRLSH type) 1100 volts grade unsheathed PVC insulated (green colour cable for earth wire) continuity earth wire connected to common earth dolly to be drawn in and including PVC conduit, medium grade of suitable size including all fittings such as bend, elbow, tee, joint, junction box including cutting chases for concealed conduits/ sunken boxes and making good to disturbed walls,floors with sunk cast pressed steel terminal box made out of MS sheet for mounting of switch, socket, fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed for following:- |
| 119 | Light /Fan point controlled by one number one way switch complete all as specified and directed. |
| 120 | S&F for switch piano flush type 5/6 amps, 230 volt, one way, single pole complete all as specified and directed. |
| 121 | S&F for ceiling rose 3 terminals / PVC / Polycarbonate, isolated body, surface type with ISI marked 230 V complete all as specified and directed. |
| 122 | S&F for inverter type batten LED light fitting of capacity 1X 20 W (or nearest next higher wattage) (4feet), 6500K, wall/ surface mounted,square profile housing and polycarbonate channel including lithium lon battery with charging time 8 hours and back up time up to 4 hours decorative type with integrated high efficiency electronic driver and operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with complete all as specified and directed. Make :- Havells Cat part No - Pride Plus inverter Batten 20 W 6500 K V1/ Crompton Cat Part No TCS-110-22-65-SL-DP-NWH. |
| 123 | S&F for Exhaust fan made of sturdy Engineering plastic complete with louvers shutter ,voltage 230V, 50 Hz,RPM 1200, copper winding of sweep 250 mm including making hole for 250 mm sweep plastic fan in suitable square/rectangle/circle shape in wall and making good disturbed sufaces of walls complete all as specified and directed. |
| 124 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and directed. |
| 125 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 6 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and directed. |
| 126 | Excavation in trenches in soft/ loose soil n.exc 1.5 metre wide and n.exc 1.5 m in depth and getting out for taking up / laying under ground electric cable complete all as specified and directed. |
| 127 | Supply and laying sub class B bricks of size 23cm x 115 cm x 7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and directed. |
| 128 | M&L for 20 mm bore HDPE light grade PIPE ISI marked for protection of cable including necessary joints complete all as specified and as directed. |
| 129 | M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing protection pipe upto 40 mm complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender