Tender For special Repair To Bldg In P-15 & P-15B In Sub Area Danapur Cantt
Tender Value
38.74 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
8 days left
EMD
77480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg In P-15 & P-15B In Sub Area Danapur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L Plain Cement Concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | Dismantling of floor, hearth or walls, tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 4 | M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed. |
| 5 | M&L for (7-8)mm thick Light shade vitrified ceramic tiles in floors, area of each tiles not exceeding 0.36 Sqm laid over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 6 | M&L for (7-8)mm Light shade vitrified ceramic tiles, area of each tile not exceeding 0.36 Sqm as on vertical surfaces such as skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 7 | M&L for (7-8)mm Dark shade/Double charged vitrified ceramic tiles in floors, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm laid over and including 15 mm thick scrred bed in cement mortar 1:6, set & jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 8 | M&L for (7-8)mm thick Dark shade/Double charged vitrified ceramic tiles area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm on vertical surface such as skirtings, dados etc, laid over and including 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 9 | M&L for (7-8)mm thick glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, etc laid over and including 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 10 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 11 | M&L for non skid tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc laid over and including 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mix with pigments to match the shade of tiles complete all as specified & directed. |
| 12 | M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified & directed. |
| 13 | Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed. |
| 14 | S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed |
| 15 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 16 | M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed. Make- Armstrong, Hunterdouglas etc |
| 17 | M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised mouldings over metal frame work complete all as specified & directed. |
| 18 | M&L PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified & directed. |
| 19 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 20 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 21 | Same as itemNo 20 above but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 22 | Taking down shutters of any description exc 1.00 Sqm and n exc 2Sqm each complete all as specified and directed. |
| 23 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 24 | M&L 10 mm thick plaster on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed. |
| 25 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 26 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overalldimension (extruded section profile) 42x50 mm(tolerance ± 1 mm), with wall thickness 2.0 mm(± 0.2 mm), corners of the door frame Jointed withgalvanized brackets and stainless steel screws, jointsmitred and Plastic welded. The hinge side vertical ofthe frames reinforced by galvanized M.S. tube of size19 X 19 mm and 1mm (± 0.1 mm) wall thickness and3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and directed at site. |
| 27 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 28 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 29 | S&F PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and directed. |
| 30 | M&L for Providing and fixing at any height 3-4mm thick Aluminum Composite Panel (ACP) cladding consisting of 0.50mm thick aluminum skin on both sides with a mineral-filled FR core. The exterior surface shall be coated with PVDF paint (minimum 30-35 microns) to provide weather resistance. The panels shall be fixed on a fabricated framework of aluminum square tubes or galvanized steel sections, including all necessary silicone sealants, gaskets, and stainless steel fasteners as per manufacturer's specifications.\\" complete all as specifed and directed. |
| 31 | S & F in repair aluminium door shutter with following specification:-(a) chowkhat frame of size 63.50x38.10x1.95mm thick weight @ 1.092Kg/RM.(b) Style/Vertical member of size 47.62 x 44.45 x 2.02 mm thick weight @ 1.052Kg/RM(c) Top member of size 47.62 x 44.45 x 2.02 mm thick weight @ 0.974(d) Bottem member of size [email protected]/m(e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket.(f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips(g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter.(h) Aluminum and PVC beading as per requirment as in fixing for ACP shhet & Glass, jointing cleat including locking arrangement. etc. |
| 32 | S & F in repair aluminium window sliding shutter three track with following specification:-(a) chowkhat frame bottem member of size 92x31.75x1.50mm @ 1.248Kg/RM.(b) chowkhat frame Top & side members sides and member of size 92x31.75x1.50mm @ 1.060Kg/RM.(c) Shutter sides members of size [email protected]/RM(d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment.(e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket.(f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, jointing cleat including locking arrangement. etc |
| 33 | S&F aluminium partition wall with following specificaiton complete all as specified (a) Member with Single side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(b) Member with Both side groove of size 63.50 x 38.10 x 1.95 [email protected] Kg/RM(c) Partialy 5mm thick Aluminium Composite Seat decorative(d Partialy 5 mm thick tinted glass.(e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.(f) Size of Pannel should not greater than (1.2m x1.2m) |
| 34 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i)Taking down APP roofing sheet/Terrazo/Tiles of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd. (ii) Properly cleaning and drying concrete surfaces.(iii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iv) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(v) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(vi) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. |
| 35 | S&F Toughned glass 05mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 36 | S&F Toughned glass 08mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 37 | S&F in repair vitreous Counter TOP WHB of size 485 x 310 x 135 mm including PVC waste pipe, coupling, complete fittings comlete all as specified and directed.Make-(a) For counter TOP WHB Cera CARLY Cat. No.Cat. No. S2020199 or equivalent in Jaquar/Hindware as approved by GE. |
| 38 | S & F in repair Vitreous china wash down water closet pan ( pedestal pattern ) Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Conversion Bend, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 670 x 355 x 755 mm S Trap- 110 mm (With Conversion Bend) complete all as specified and directed Make :Cera Cat. No. S1013233 or equivalent in Jaquar/Hindware as approved by GE. |
| 39 | S & F in repair 15 mm dia Single lever basin mixer with 315 mm (12.5\\") extended body,160 mm spout length and600 mm braided connection pipe (without pop-up) including all necessary fittings as approved complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015453 or equivalent in Jaquar/Hindware as approved by GE. |
| 40 | S&F in repair bib tap 15 mm with wall flange and aerato for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. Make - Cera Series VICTOR Cat Part No-F1015151 or equivalent in Jaquar/Hindware as approved by GE. |
| 41 | S&F in repair angle cock 15 mm with wall flange screwed for iron pipe complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F1015201 or equivalent in Jaquar/Hindware as approved by GE. |
| 42 | S&F in repair two way angle cock with side handle 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make - Cera Series VICTOR Cat Part No-F015211 or equivalent in Jaquar/Hindware as approved by GE. |
| 43 | S & F in repair chromium plated corner glass shelf of size 150 x 150 mm with brackets complete all as specified and directed.Make - Cera Series VICTOR Cat Part No-F015361 or equivalent in Jaquar/Hindware as approved by GE. |
| 44 | S&F in repair ABS health faucet withHealth Faucet ABS body with wall hook and 1 metre chrome plated PVC hose p 1.0 m long flexible tubes and wall hook suitable for EWC including nut/washer complete.Make - Cera Series DRIBBLE Cat Part No-F8030103 or equivalent in Jaquar/Hindware as approved by GE. |
| 45 | S&F in repair vitreous china urnial of size 375 x 390 x 590 mm including pvc waste pipe, coupling, Jet speader, PVC Connection Pipe complete fittings comlete all as specified and directed.Make-(a) For Urninal Cera CAPRIANA Cat. No.. B2050106 or equivalent in Jaquar/Hindware as approved by GE.(B) For Spreader Cat Part Cat. No. F8070201 or equivalent in Jaquar/Hindware as approved by GE. |
| 46 | S&F 5.5mm thick looking mirror with LED light and touch button of selected quality glass exc 0.50 Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and directed. |
| 47 | S & F PVC Soap Dispenser of capacity not less than 250ml Capacity including complete fittings colur and design approved by the GE complet all as specifed and directd. |
| 48 | M&L for vitrified heavy duty (dura stone) tiles 600x600x 8to9 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 49 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 50 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 51 | M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified directed. |
| 52 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 53 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specifed and directed. |
| 54 | Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 55 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 56 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured & paid separately |
| 57 | M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed. |
| 58 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 59 | M & L preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 3.00mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 60 | M & L complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 1.5mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 61 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specifed and directed. |
| 62 | M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 63 | M&L for prepartion of new surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 64 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe. |
| 65 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete all as specifed and directed. |
| 66 | M/L PVC(SWR) bend of 75mm dia of any radius etc complete all as specified and directed. |
| 67 | M/L PVC(SWR) Tee of 75mm dia etc complete all as specified and directed. |
| 68 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete all as specifed and directed. |
| 69 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 70 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed |
| 71 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 72 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. Please Enable Macros to View BoQ information |
| 73 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender