Tender For Special Repair To Roof Treatment, Vertical Shafts And Seepage In Piru Vihar Under Ge (West) Delhi Cantt-10
Tender Value
1.45 Crore
Estimated cost
Bid Submission
30 Sep 2026
0 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roof Treatment, Vertical Shafts And Seepage In Piru Vihar Under Ge (West) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Sep-2026 | REVISED BOQ AND OTHERS | BOQ | 30-Sep-2026 |
| 2 | 15-Sep-2026 | corrigendum | BOQ | 30-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 NAME OF WORK: SPECIAL REPAIR TO ROOF TREATMENT, VERTICAL SHAFTS AND SEEPAGE IN PIRU VIHAR UNDER GE (WEST) DELHI CANTT-10 Contract No : CWE/WEST/TOKEN-38/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified |
| 3 | Demolition of cement ( Un-reinforced) in above Ground floors and paving exc 15cm thickness above ground level) complete all as specified. |
| 4 | M & L for 750 mm wide as in plinth protection, 75 mm thick cement concrete 1:3:6 type C-2 (Nominal Mix) with 40mm crushed stone aggregate finished even and fair, laid to slope of 1 in 12. It shall be laid in alternate bays, each bay not exceeding 3 m length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and two parts of heated sand, complete all as specified and directed by Engr-in-charge. |
| 5 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- steel sheet , provide over chhajja upto G+8 storey building using scaffolding . |
| 6 | Dismantling of brick tiles or terracing tiles single layer on roof complete all as specified and directed. |
| 7 | Demolition of mud phuska on roof slabs, any thickness including cleaning of roof surfaces and removing the debris upto the distance exc 1.00 Km but not n.exc 1. 5 Km complete all as specified and directed. |
| 8 | Scraping old tar from roof treatment over concrete padding of any thickness etc from roof including finishes or junction or parapet and cleaning the surface completely all as specified |
| 9 | M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound complete all as specified. (Note : Supply only WPC shall be measured and paid separately) |
| 11 | M&L for water proofing treatment to roof surface, with APP polymeric based water proofing membrane 3mm thick & weighing not less than 3.0 Kg / Sqm of approved make black finish consisting of a central core of high molecular high density polyethylene film (HMHDPF) & reinforced with non woven polyester matt of min 150 gm/sqm with a thermo fusible finish laid over a coat of hot blown bitumen of 85/25 grade conforming to IS 702 @ 1.2 kg/sqm over a coat of an bitumen primer conforming to IS-3384 @0.4 Ltr/Sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing including applying a coat of cold emulsion bituminous primer complete as per manufacturer's instructions complete all as specified and directed.Note :- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only.2. Bitumen primer, bitumen and membrane shall be of same make / manufacturer. (ii) The APP Membrane to be inserted in the parapet wall/wall by cutting chases of atleast 65mm X 50mm size& making good in CM 1:3. |
| 12 | S & F for Heat Resistant Terrace Ceramic Tiles (300 mm x 300 mm x 8-10 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner incl 15mm thick screed bed in CM1:4. |
| 13 | M&L for providing cement concrete 1:2:4 type B-I 20mm graded in roof kerb or mud slops, rounded or chamfered on edges, plinth courses, coping, kneelers, apex stone, kerb water tough and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work all as specified and directed. |
| 14 | Supply only Integral waterproofing compound (ISI marked) |
| 15 | Demolition of brick work built in cement /lime mortor in any position / situation in walls/parapets complete all as specified and directed. |
| 16 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:6 complete all as specified. |
| 17 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified. |
| 18 | M&L for rendering 15mm thick ready mix plaster on fair faces of brick work or concrete surfaces of walls finished fair and smooth without using extra cement even hieght in multistorey building ,complete all as directed |
| 19 | M&L for rendering 10mm thick ready mix plaster on fair faces on other than fair faces of brick work or concrete surfaces of walls finished fair and even without using extra cemet and in multistorey building ,complete all as directed |
| 20 | M&L for 5mm thick ready mix plaster on fair faces finished fair and even surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified |
| 21 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete. |
| 22 | M&L for preparation of newly plastered surfaces of wall and apply two coat oil bond distemper over one coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete. |
| 24 | Taking up or down 15mm bore steel tubing and connections incl cleaning for refixing or removal to store all as specified. |
| 25 | All as per item above, but 20mm bore. |
| 26 | M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as spd and directed. |
| 27 | All as per item above but 25mm dia. |
| 28 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth for inserting GI tubing / CPVC pipes in walls, floor etc and making good complete all as specified & directed by Engr in Charge. |
| 29 | S&F rotational moulded polythylene water storage tanks 500 Ltrs capacity, triple layered (cylindrical vertical with closed up) hoisted and fixed in position incl tank cover complete all as specified and directed. |
| 30 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminum rod and high density polythene float and flynut complete, screwed for iron pipe or brass furrule size 25mm bore. (Min weight 210gms complete all as directed) |
| 31 | S&F in repairs 25mm bore of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 32 | Demolition and breaking up of 75mm dia drain pipes (CI,AC etc) set in any cement mortor of any diameter incl bends. |
| 33 | Demolition and breaking up of 100mm dia drain pipes (CI,AC etc) set in any cement mortor of any diameter incl bends. |
| 34 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 35 | S&F of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and trenches complete all as specified and directed. |
| 36 | All as of above item but of 75mm dia complete all as specified and directed. |
| 37 | S & F bends 110mm dia PVC (SWR) bends complete all as specified |
| 38 | S & F bends 75mm dia PVC (SWR) bends complete all as specified |
| 39 | S & F 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval acces door complete alla as specified and directed. |
| 40 | S & F 75mm dia PVC (SWR) junction single,(Single T) equal or unequal with oval access door complete all as specified and directed. |
| 41 | S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 42 | S & F 75mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 43 | S & F 75mm dia PVC (SWR) P trap, including jointing with solvent cement complete all as specified and directed. |
| 44 | S&F Grating doom 100mm dia of SS (Minimum weight 35gms) all as spd and directed by Engg-in-Charge |
| 45 | S&F 100mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as . |
| 46 | S&F 75mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as . |
| 47 | S&F in repairs 15mm dia chromium plated bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Hindware cat no :F690004 , Cera cat no :F2014152 or Jaguar cat no :CQT-CHR-23047 |
| 48 | S&F brass CP vertical mixer for mixing hot & cold water for wash hand basin screwed down for 15 mm bore iron pipe of ferrule complete all as specified and directed. Make Hindware cat no :F690014 , Cera cat no :F2014461 or Jaguar Cat no :CQT-CHR-23167B |
| 49 | S&F CP wall mixer non telephonic type 3-in-1 mixing hot and cold water for shower screwed down for 15 mm brass iron pipe of ferrule of complete all as specified. Make: Hindware cat no :F690020 , Cera cat no :F2014401 or Jaguar Cat no :CQT-CHR-232730R |
| 50 | Supply and fix Brass CP mixer swivel spout for mixing hot & cold water for Sink screwed down for 15mm bore iron pipe or ferrul of complete all as specified and directed. Make: Hindware cat no :F690027 , Cera cat no :F2014511 or Jaguar Cat no :CQT-CHR-23309 |
| 51 | S&F in repairs stop valve / Angle valve 15mm bore fancy type chromium plated, with long shank and cup complete all as specified and directed. Make: Hindware cat no :F690043 , Cera cat no :F2014201 or Jaguar Cat no :CQT-CHR-23059 |
| 52 | S&F PVC connection 450mm long with 2 Nos brass check nuts, suitable for 15mm bore complete all as specified and directed. |
| 53 | S&F in repairs shower rose, chromium plated brass, fancy type, 125 mm with or without swivel joint, any size, including fixing to steel pipe or union, complete all as directed. |
| 54 | Supply in repairs only CP waste coupling 32mm size with PVC waste pipe, plugs and washers for kitchen sink complete all as spd & directed. |
| 55 | S&F in repairs 10 litres capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified. |
| 56 | S&F in repair European vitreous china wash down water closet pan S / P Trap (excluding flushing cistern but including flush pipe and pvc seat cover white). Complete all as specified and as direcfted by Engr in Charge. |
| 57 | S&F in repairs vitreous china wash hand basin (flat back or angle back type) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size. Complete all as specified and as directed by Engr in Charge. |
| 58 | M&L for 600x450mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including 6mm thick AC building board or commercial plywood and fixed 1st class Hard wood moulding frame and two Nos. hanging clips including taking down old unserviceable looking mirror complete all as directed. |
| 59 | S&F in repair aluminium anodised tubular towel rail 20mm dia, D type 60 cm long between flanges, complete all as specified and directed. |
| 60 | S&F in repair Glass Shelf of 8mm minimum thickness including CP railing with minimum 400mm length complete all as specified and directed by the Engineer-in-Charge. |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 62 | S&F mild steel framed work as in door or gates of angle or other sections, grill, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165. |
| 63 | M&L for Preparation of new or previously untreated surfaces of steel surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 64 | Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 65 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) size 400X400, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 66 | M&L for coloured glazed ceramic tiles of size 600X300X 7 to 8 mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:4, complete all as specified. |
| 67 | Taking down & refixig in the same opening chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 68 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) |
| 69 | S & F outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone |
| 70 | M&L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid incl anodised aluminium snap grid frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 71 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 72 | S&F solid PVC door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications. |
| 73 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 74 | S&F MS butt hinges medium weight 100 mm size fixed with MS screws. |
| 75 | S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws. |
| 76 | S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws. |
| 77 | M&L Cement Concrete 1:2:4 type B-2 (40mm graded aggreate) 125mm thick as in tank staging , platforms etc finishing cement concrete surface even and smooth without using extra cement all as per specified and directedNote :- Work will executed up to 8 th storay and rate will quoted incl shifting of material by lift or pully as possible. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 15, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Today
Sep 30, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
TodaySep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender