Defence Statutory Bodies & Commissions/Committees Closing in 17 days TDR #57300313

Tender For Provn Of Artificial Recharge Structures Incl Allied Facilities For Recharging Ground Water At Morar Cantt Under Ge Gwalior.

Issued by Statutory Bodies & Commissions/Committees · Gwalior, Madhya Pradesh
Tender Value
43.59 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
17 days left
EMD
87190
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn Of Artificial Recharge Structures Incl Allied Facilities For Recharging Ground Water At Morar Cantt Under Ge Gwalior.

BOQ

Name of Work:- PROVN OF ARTIFICIAL RECHARGE STRUCTURES INCL ALLIED FACILITIES FOR RECHARGING GROUND WATER AT MORAR CANTT UNDER GE GWALIOR.
Sl. No. Item Description
1Surface dressing n. exc 15cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.
2Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed.
3Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5m in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed.
4M&L Boring hole in rainwater harvesting pit in any type of soil of 550mm bore etc complete all as specified and directed.
5S&F 150mm Bore dia PVC/ HDPE pipe in bore hole complete all as specified and directed
6S&F 150mm Bore dia perforated/slotted PVC/ HDPE pipe in bore hole complete all as specified and directed
7M&L stone aggregate gravel of gauge 3.60 mm complete all as specified and directed.
8M&L cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
9Use and Waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter with rough finish flat surface complete all as specified and directed.
10M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed.
11M&L RCC M-30 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
12Use and waste for work (rough finished) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttressess etc vertical or to batter complete all as specified and directed.
13M&L cement concrete M-30 (design mix) (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls, and the like any thickness above top of footing incluidng attached pillaster and buttresses complete all as specified and directed.
14M&L rendering 10mm thick on fair faces of brick work /concrete surface in CM 1:6 using liquid water proofing compound by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement complete all as specified and directed.
15Supply only liquid integral water proofing compound complete all as specified and directed.
16M&L Hardcore of broken stone of gauge 40to 60mm, deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
17M&L broken stone aggregate of gauge 3 to 10 mm complete all as specified and directed.
18M&L sand filling under floor (Coarse Sand) on in foundation in layers not exceeding 25cm thick each layer including watering and well ramming complete all as specified.
19S & F 6 mm thick mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W
20Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
21S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 150 mm complete all as specified and directed.
22S&F 100 mm dia vent PVC (SWR) pipe 600mm long, bent to shape, with fittings as vent pipe complete all as specified and directed.
23M&L for brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
24Use and waste forr form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.
25M&L for RCC M-25 (design mix) using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all complete all as specified and directed.
26Pre-cast Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers and set in cement mortar (1:4) including form work complete all as specified and directed.
27Returning filling in with excavated soil including spreading leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed.
28Removing excavated material to a distance exc 50 m and n.exc 100 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.
29S&F cast iron work grade FG 150, unmachined, in brackets, guuly traps, gratings railing frames,manhole covers, fire and soot doors, dampers, stop valves boxes, gate stops, part of ranges, balusters ans similar articles complete all as specified and directed.
30Excavation in trenches n.exc 1.50 metre wide and n.exc 1.5 metre deep for foundation or for shafts, wells, cesspits, manholes, pier holes not exceeding 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.
31M & L for PCC 1:4:8 D2 (Using 40 mm Graded stone aggregate) in foundaion, filling & mass concrete complete all as specified and directed.
32M&L RCC M-25 mix concrete (using 20 mm graded stone aggregate) For Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
33M&L RCC M-25 mix concrete (using 20 mm graded stone aggregate) for Columns, pillars, piers, posts and struts, walls complete all as specified and directed.
34M&L TMT bars 10 mm and over dia cut to length bent to shape required including bending hooking ,binding with MS wire not less than 0.9 mm dia complete all as specified and directed.
35Use and waste for formwork to faces of wall and similar work including attached pillasters ,buttresses with rough finish complete all as specified and directed.
36Removing excavated material exc. 250 m but n exc. 500 m and depositing complete all as specified and directed.
37Returning filling in with excavated soil including spreading leveling, watering and well ramming in layers n.exc 25cm thick each layer complete all as specified and directed.
38Reinforced concrete pipes, class NP-3, 150mm laid and jointed complete with collers complete all as specified and directed.
39M&L for 150mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) in concrete bedding to drain pipes including packing under hauching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
40M& L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m in cement mortar in 1:4 complete all as specified and directed.
41M&L for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) in Kerbs /Copings/bed plates and the like including weathering ,slightely rounded or chamfered angles and throating as directed including use of necessary form work complete all as specified and directed.
42Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement , including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
43M&L for precast manhole cover 1:2:4 type B1 (using 20mm graded stone aggregate) including 10mm dia reinforcement, form work as in manholes cover slab etc, set in cement mortar 1:4 complete all as specified and as directed.
44S&F MS rolled section/tubular sections in purling , cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O complete all as specified and directed.
45S & F 6 mm thick mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and as directed conforming to Fe-410 W
46M&L for 15mm thick rendering in C M 1:4 on fair faces of brick work or concrete surfaces and finshing even and smooth complete without using extra cement all specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57300313
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.59 Lakhs
LAST DATE 21-09-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn Of Artificial Recharge Structures Incl Allied Facilities For Recharging Ground Water At Morar Cantt Under Ge Gwalior.
Basic Detail
Tender No 8407/GWL/E8
Bidding Type Tender
Location
City Gwalior
State Madhya Pradesh
Key Dates
Publish Date 02 Sep 2026
Submission Date 21 Sep 2026
Open Date 23 Sep 2026
Finance
Tender Value 43.59 Lakhs
Tender Fee 500
EMD 87190
Exemption Available
Document List
722a75ea-c2fe-4ae7-8ac0-1137e32e49a7.html
8407tenderdocuments.pdf
BOQ_882441.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 02, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 17 days
Sep 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
html

722a75ea-c2fe-4ae7-8ac0-1137e32e49a7.html

pdf

8407tenderdocuments.pdf

xls

BOQ_882441.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders