Tender For Repair And Maintenance Of Hanger Doors, External Water Pipe Lines, Pump Sets, Motors And Connected Works At Cgae And Cgra Bhubaneswar Under Ge (I)(Cg) Bhubaneswar
Tender Value
16 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
0 days left
EMD
32000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Hanger Doors, External Water Pipe Lines, Pump Sets, Motors And Connected Works At Cgae And Cgra Bhubaneswar Under Ge (I)(Cg) Bhubaneswar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Sep-2026 | Corrigendum No 1 | BOQ | 22-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for checking the serviceablity of hanger door motor and gear driving assembly with connected chain & finding out any non alignment in wheel of hanger door and sprockets mounted on shaft driven by motor , gear assembly of hanger door motor and rectifying same including connecting chain with wheel of hanger door and shaft driven by motor completed all as specified and directed. Note : Cost is including all material ruquired for rectification including key, sprocket, shaft , chain connecting lock and any other material. |
| 2 | Supply and fixing the proximity switches at the top side of hanger door of MMMA Hanger and Dornier hanger at CGAE Bhubaneswar completed all as specified and directed. |
| 3 | Supply and fixing in replacemrnt of flat copper cable 2.5 sqmm 4 core for proximity switch/ Motor including arranging of hydraulic ladder for this work or Bamboo stageing completed all as specified and directed. |
| 4 | M & L for dismandling of 3 Phase induction motor of capacity upto 3 Hp and taking into workshop for rewinding the motor complete with change of Bearing , apply greasing , repairs to chain link, etc ., for proper functional of Motor for Hanger door movement completed all as specified and directed. |
| 5 | M&L for removing the 08 Nos broken screws in the hanger door wheel by welding the inside part of screw and then removing from holes of wheel completed all as specified and directed. |
| 6 | Supply and fixing 08 Nos. M16 screws (bolts) in hanger door wheels completed all as specified and directed. |
| 7 | Repair to panels replacement of burned Relays 220 V, 5 Amp- 01 Nos, Contactors 220/415 V, 12 A -08 Nos, MCB SP 6 A 220 V- 04 Nos & MCB TPN63 A -01 Nos MNX A2 contactor-04 Nos , MNX 12 Power contactor-04 Nos etc. including rewiring of operating panels Installed at MMMA & Dornier hanger front side complete for proper operation of motorized hangar door complete all as specified and directed. |
| 8 | M&L for removing the Hanger door motor of 3.7 KW power from hanger door to workshop ,rewinding of motor, replacement / repair to the base plate of motor by casting to fit in the original position in hager door and replacing the bearings of motor and refixing at hanger door completed all as specified and directed. |
| 9 | M&L for lubrication and greasing of 3.7 KW motors , gear assembly,sprocket chains and wheels of the hanger door at CGAE Bhubaneswar completed all as specified and directed. |
| 10 | M&L for repairing to sprocket chains by cutting or adding sprockets to fit in the position as required to drive hanger door smoothly completed all as specified and directed. |
| 11 | Supply and replacement of worm hollow type Gear Box ( specification bore dia -35mm ,Ratio-- 40:1 ,suitable for 2HP , 4 Pole ,B5 Motor , Type W86 U40 P90 B5B3 ) connected to Hanger door motor at MMMA Hanger including testing & commissioning completed all as specified and directed. |
| 12 | M & L in replaement of Fire alarm control panel complying withBS EN 54 2 loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules completed all as specified and directed. Make : Apollo |
| 13 | M & L for servicing of smoke/ Heat detector including cleaning of detectors chamber by Air blower completed all as specified and directed. Make : Apollo |
| 14 | M & L for Cleaning of MCP(Manual call point) manually completed all as specified and directed. |
| 15 | M & L for cleaning of Sounder including cleaning the sounder chamber by cleaner completed all as specified and directed. |
| 16 | M & L for monthly checking the serviceablity of all smoke/heat detectors, MCP, Sounders & connecting cables connected to fire alarm control panel in Dornier hanger and MMMA Hanger and finding out any fault in any detector, wiring, MCP or sounders and replacing defective parts for rectification including upadating software of Fire alarm control panel completed all as specified and directed. Note:1. cost of defective parts to be replaced is not included in item rate 2. Item rate cost is inclusive of submitting monthly report regarding serviceablity of fire alarm system at CGAE Primises. |
| 17 | Supply and fixing in replacement of copper conductor two core 2/ 1.5 sqmm for Smoke detecor complete with clamping including steel conduit as per exisitng completed all as specified and directed. |
| 18 | Supply & replacement smoke / Heat detector of addressable type compatible with existing Fire alarm control panel complete with connection complete all as specified and directed. |
| 19 | Supply & replacement addressable Manual Call Point resettable type/Break glass switches with LED indication , Die cast aluminium Round type compatible with existing Fire alarm control panel complete with connection complete all as specified and directed. |
| 20 | Supply & replacement Loop Power Hooter/sounder of addressable type compatible with existing Fire alarm control panel complete with connection complete all as specified and directed. |
| 21 | Supply & replacement base plate with data card of smoke / Heat detector of addressable type compatible with existing at CGAE of Make Apollo complete with connection complete all as specified and directed. |
| 22 | M & L for Cleaning ,servicing ,painting ,writing SM.MES No of pump sets including minor repair work if required and greasing of all moving parts i.e pump impeller , stainless steel shaft, bearing etc for smooth running and replacement of gland packing, gaskets, shaft sleeve, gland packing, neck ringnut bolts and washers etc, with necessary oiling and greassing of up to 20 HP pump complete all as specified and directed. Note: The rate included for grinding of shafts, replacement of all parts for required to working of Pump sets in all respect. Bearing will be measured & paid seperately as supply only under this schedule. |
| 23 | Supply only ball bearing 6310-ZZ/C3(SKF) & bearing 6206-ZZ (SKF) for pump complete all as specified and directed. |
| 24 | Dismantling and taking down of motor from pump after disconnection of mechanical tyre coupling and unbolting from foundation base plate,disconnecting of electric connection from terminal, loading/unloading the motor to vehicle and transportation of the motor to workshop, cutting the burnt winding and clean the rotor & stator with CTC or other cleaning matarial and rewinding of stator/ rotor winding with supper enamaled copper wire as per existing the size/gauge wire and turn of the previous winding, insulating the leads with insulating tubes and varnishing the stator with good quality of insulating varnish . Afterward heating the stator in heat chamber for continous 2 days for better insulation resistance reassembling the stator & rotor carefully after replacement of worn out bearings, transportation of motor from workshop to its original location, unloading the motor and placing it on base frame, connection of motor with pump with tyre coupling and fixing to the base frame after checking up the alignment, testing of motor with megger for checking of insulation resistances, electric connection of motor to the control panel, testing on load of capacity 15 /20HP Induction motor complete all as specified and directed. |
| 25 | M&L for repair, cleaning and servicing of automatic star delta starter of capacity 15/20 HP fixed in existing LT panel including tightening of all loose coonection and replacement of minor defective parts such as cable lugs, nut bolts PVC copper connection wire etc to make the starter serviceable complete all as specified and directed. (Note : Major defective parts will be measured and paid seperetely under relevent item as supply only) |
| 26 | M & L for Cleaning ,servicing ,painting ,writing SM.MES No including minor repair work if required and greasing of all moving parts i.e pump impeller , stainless steel shaft, bearing etc for smooth running and replacement of packing gaskets, shaft sleeve, gland packing, neck ringnut bolts and washers etc, with necessary oiling and greassing of 7.5 HP pump complete all as specified and directed. Note: The rate included for grinding of shafts, replacement of all parts for required to working of Pump sets in all respect. Bearing will be measured & paid seperately as supply only under this schedule. |
| 27 | M & L in replacement of gland packing of any size suiatble for existing pump complete all as specified and directed. |
| 28 | M&L for repair, cleaning and servicing of automatic star delta starter of capacity 7.5 HP fixed in existing LT panel including tightening of all loose coonection and replacement of minor defective parts such as cable lugs, nut bolts PVC copper connection wire etc to make the starter serviceable complete all as specified and directed. |
| 29 | M & L for Cleaning and removing all scales and deposited materials in under ground water sump of 2.5 lakhs ltr by drain out the sludge/waste at bottom of the tank by manually or using non cloging pump sets and applying bleaching powder , brushes for removing deposited materials and removal the same from sump and deposited the same where as directed (not more than 50 mtr) , including cleaning the sourrounding area of under ground sump complete all as specified and directed. note :- The cost of coir rope, bleaching powder, brush for removing scales & cleaning the surrounding area near tank and dumping the mud utside the premises shall be deemed to include in the above item rate. |
| 30 | All as per item No 29 above but capacity of UG Sump 3 lakhs litre. |
| 31 | M & L for Cleaning and removing all scales and deposited materials in over head tank 50000 liters capacity by applying bleaching powder , brushes for removing deposited materials, including jungle cleaning to sourrounding area including draining out existing water complete all as specified and directed. Note :- The cost of coir rope, bleaching powder, brush for removing scales & cleaning the surrounding area near tank and dumping the mud utside the premises shall be deemed to include in the above item rate. |
| 32 | M & L for Cleaning and removing all scales and deposited materials in over head tank 20000 liters capacity by applying bleaching powder , brushes for removing deposited materials, including jungle cleaning to sourrounding area including draining out existing water complete all as specified and directed. Note :- The cost of coir rope, bleaching powder, brush for removing scales & cleaning the surrounding area near tank and dumping the mud utside the premises shall be deemed to include in the above item rate. |
| 33 | Taking up/down GI tubing from trenches , duct, wall, roof or in any position with all fittings for re-laying /refixing of serviceable pipes and removing the unserviceable pipes for 40mm to 50 mm dia complete all as specified and directed. |
| 34 | All as per item No. 33 here-in-before but 25 mm dia |
| 35 | Supply and fixing in replacement GI tubing medium grade of 50 mm dia for cable protection on pole/wall/floor etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed. |
| 36 | All as per item No. 35 here-in-before but 25 mm dia |
| 37 | Supply and fixing in replacement MS tubing medium grade of 100 mm dia with all fitting including welding and fixed complete to walls and ceilings or laid in floors along with suitable supports and flanges suitable for fixing at pump suction all as specified including two coats of primer and one coat of synthetic paint complete all as specified and directed. |
| 38 | Supply and fix in repair foot valve as per IS-4038 of cast iron with brass diaphragm heavy duty screwing type complete all as specified and directed of the following sizes .Make-Kirloskar/Kartar/Leader/Upadhaya |
| 39 | (a)100 mm dia bore pipe |
| 40 | (b) 80 mm dia bore pipe |
| 41 | Supply and fixing of brass gun metal gate valve with iron wheel head screwed both ends for iron pipes including taking out old unserviceable valves for 50 mm dia pipe complete all as specified and directed. |
| 42 | All as per item No. 39 here-in-before but 25 mm dia |
| 43 | M & L in replacement of CI non return butterfly valve suitable for 80 mm dia pipe with complete accerssories complete all as specified and directed. |
| 44 | Supply and fix in repair CI sluice valve flanged of class PN 1.6 conforming to IS - 14846 complete with iron wheel head , SS spindle and check nut , including jointing material such as rubber insertion nuts, bolts and washers etc complete ,of 80mm size complete all as specified and directed. Make - Kirloskar/upadhaya/Leader/ Zoloto or eqvlnt. |
| 45 | S & F in replacement of Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard including carried out of all minor plastering/cement /welding work if required at site with fixing arrangements complete all as specified and directed. |
| 46 | M&L for repair of fire fighting hose cabinet box of size 0.8m x.6 m x 0.25mtr (L x W x H) made out of 3 mm thick MS sheet by repairing of broken hinges of cabinet door , replacement of broken door glass with 2 mm thick clear glass of size 45 cm 25 cm size ,repair of door oppen handle , locking arrangement , painting the inside and out side of the box with red colour synethetic enamel paint over a coat of red oxide parimer including carried out of all minor plastering/cement /welding work if required at site complete all as specified and directed |
| 47 | S & F in replacement of Hydrant valve single headed of 63mm dia of size conforming to IS 5290 complete all as specified and directed |
| 48 | S & F in replacement of hose 15 mtr long 63 mm dia complete all as specified and directed |
| 49 | S & F in replacement of hose 20 mm dia with nozzle and 15 mtr length conforming to IS 5132 complete all as specified and directed. |
| 50 | M & L for painting of Fire fitting lines 80 mm dia with fire red paint after removing old paint from pipe & other steel section bracket & support clamps etc and inclusive of one over coart and one finishing coat of fire red paint complete all as specified and directed. |
| 51 | All as per above item No 48 but 100 mm dia pipe |
| 52 | Supplying, laying, connected, testing and commissioning of 100 mm dia MS ERW pipes thickness 6.0 mm including all specials class 'B' jointing materials, welding works and RCC theft hold where branch tee, bed, elbow etc including taking down old unserviceale pipe complete all as specified and directed. |
| 53 | M & L for Cleaning ,servicing ,painting ,writing SM.MES No including repair work and greasing of all moving parts i.e pump impeller , stainless steel shaft, bearing & rubber coppling etc for smooth running and replacement of packing gaskets, shaft sleeve, neck ringnut bolts and washers etc, with necessary oiling and greassing of 60/65 HP, 2280 IPM pump complete with testing complete all as specified and directed. |
| 54 | M & L for Cleaning ,servicing ,painting ,writing SM.MES No including repair work and greasing of all moving parts i.e pump impeller , stainless steel shaft, bearing & rubber coppling etc for smooth running and replacement of packing gaskets, shaft sleeve, neck ringnut bolts and washers etc, with necessary oiling and greassing of Jockey pump 15 HP, 180 IPM complete with testing complete all as specified and directed. |
| 55 | M & L for Cleaning ,servicing ,painting ,writing SM.MES No including repair work and greasing of all moving parts i.e pump impeller , stainless steel shaft, bearing & rubber coppling etc for smooth running and replacement of packing gaskets, shaft sleeve, neck ringnut bolts and washers etc, with necessary oiling and greassing of Diesel pump of 65 HP, 2280 IPM complete with testing complete all as specified and directed. |
| 56 | M & L for Repair & replacement of pressure switch complete all as specified and directed. |
| 57 | M & L for Repair & replacement of pressure gauge as per sample complete all as specified and directed. |
| 58 | Supplying, laying, connected, testing and commissioning Cast Iron Non returned valve (NRV) 100 mm dia class 1.6 PN including all jointing materials complete with Rubber gaskit,Nuts and Boults etc. and taking down old unserviceable NRV complete all as specified and directed. |
| 59 | M & L for repair and replacement of Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short complete all as specified and directed. |
| 60 | Supply and fix in repair hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore complete all as specified and directed. |
| 61 | Dismantling water tanks and removing to store complete all as specified and directed. |
| 62 | Supply and fix Rotational moulded polyethylene water storage tanks of 500 Ltrs Capacity (cylindrical vertical with closed top) hoisted and fixed in position of top of the bldg having upto 8 floor complete all as specified and directed in SSR Part I Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 22, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodaySep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender