Tender For Comprehensive Maintenance To B/R External Services Inside Gtre And Misc Repair Works To Mes Infrastructure At Gtre, Cabs, Cemilac, Cda, Dsc And Ge / Bso / E&M Office At Bangalore.
Tender Value
46 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
13 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To B/R External Services Inside Gtre And Misc Repair Works To Mes Infrastructure At Gtre, Cabs, Cemilac, Cda, Dsc And Ge / Bso / E&M Office At Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 mtr and disposal of unserviceable materials complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position including removal of rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down cement plaster on brick or stone walls etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 5 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 6 | Dismantling fencing wire mesh, any type complete all as specified and as directed. |
| 7 | Dismantling steel barbed wire , any type and any description from steel post / RCC Post etc, complete all as specified and as directed. |
| 8 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 mtr and disposal of unserviceable materials to a distance exc. 1.50 KM but n.exc. 10 KM and depositing where directed debris and rubbish outside MD land complete all as specified and as directed. |
| 9 | Dismantling of Stone slabs and tiles laid dry of any description or thickness in floors, aprons, complete all as specified and as directed. |
| 10 | Demolition of Stone slabs and tiles laid, bedded and pointed in any mortar or thickness in floors, aprons, complete all as specified and as directed. |
| 11 | Material and labour for Stone Walling of squared rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and as directed. |
| 12 | Material and labour for Stone Walling of squared rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM (1:4) but except stone complete all as specified and as directed. |
| 13 | Material and labour for flush pointing to square rubble masonry brought upto courses in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Raking out joints to random rubble or polygonal rubble or Square rubble or uncoursed or brought upto courses in cement mortar complete all as specified and as directed. |
| 15 | Material and labour for Precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar (1:4) complete all as specified and as directed. |
| 16 | Material and labour for Plain Cement Concrete 1:4:8 type- D2 (Using 40 mm graded stone aggregate) in foundations, filling and mass-concrete complete all as specified and as directed. |
| 17 | Material and labour for Plain Cement Concrete 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in plinth courses, coping, hold fasting, kneelers etc, including necessary form work etc., complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour for Plain Cement Concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed. |
| 19 | Material and labour for rendering 15mm thick, cement plaster (1:4) on fair faces of brick work or PCC solid block surfaces or concrete surfaces finished even and smooth without using extra lime or cement complete all as specified and as directed. |
| 20 | Material and labour for two coats of cement base paint of approved tint on new plastered wall surfaces including preparation of surfaces complete all as specified and as directed. |
| 21 | Supply and fix rolled mild steel angle iron fencing post and sturts in fencing including necessary cutting, drilling, welding etc and bending to swan neck shape, curved or ramped portions of hand rails to required shape or figure as required and drilling holes notching for wires etc conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 22 | Supply only for chain link MS galvanised fencing any size, complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 24 | Supply and fix rolled mild steel flat iron for securing bolts post and strut in fencing including cutting, drilling holes, notching for wire etc. flat iron fillets and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 25 | Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but n. exc. 10 cm long and dia of shank 5 to 10 mm complete all as specified and as directed. |
| 26 | Supply and fixing for galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as complete all as specified and as directed. NOTE :- Each line wire to be measured. |
| 27 | Supply and fix in repairs 450mm dia razor blade galvanised barbed concertina coil having minimum weight of 8 Kg (+) or (-) 5% per coil of 2.6mm dia wire, each concertina coil shall be having minimum 5 to 6 circles per running meter of fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasteners such as J clips, C clips, U clips including removing old unserviceable concertina coil, complete all as specified and as directed by Engineer-in-Charge.NOTE :- After stretching the coil, the length of the compound wall on which it has been stretched shall be considered for measurement. |
| 28 | Materials and labour for Mild steel framed work as in gates, grills, grating pintel hinges, stops, hand made sliding bolts, weld mesh etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars and for ornamentals and intricate design conforming to Fe 410 -W (Gde- E- 250) Quality A of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and including either hooks and hinges doors (Exclusive of steel sheeting or other covering running rails and guides) and hanging, also fastening and fixing with one shop coat of Zinc Chromate paint (including preparation of surface at contractor workshop before fabrication) complete all as specified and as directed. |
| 29 | Material and labour for 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, with welded seams, including bending or turning up, mitred angles, etc. as require complete all as specified and as directed. |
| 30 | Supply only for Stainless steel groove / curved wheel Heavy duty track wheel rigid caster for sliding gate roller wheel V/U/H Groove wheel double bearing for swing sliding gate, load capacity 500kg etc complete all as specified and as directed. |
| 31 | Providing and fixing 75mm thick precast reinforced cement concrete (Reinfroced Cement Concrete) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), Type B-1, in cover slabs for manholes, drain cover and water tanks covers etc., including centering, shuttering, using 8mm dia TMT bars reinforcement, casting, curing, and finishing, Placing and setting in cement mortar 1:4 (1 cement : 4 coarse sand), complete in all respects as per specifications and as directed by the Engineer-in-Charge. |
| 32 | Supply and fixing in repairs, factory manufactured heavy duty Fibre Reinforced Plastic (FRP) drain/manhole cover and frame of approved make, suitable for a load bearing capacity of 5 Ton, made from high quality reinforced thermosetting resin with anti-corrosive, weather resistant and non-slip surface finish, including FRP frame embedded/fixed in cement concrete or masonry work, setting in proper line and level, grouting the sides with cement mortar, including all cutting, fitting, finishing, labour, tools and plants, carriage and all incidental charges complete all as specified and as directed. |
| 33 | Material and labour for applying two coats of synthetic enamel paint of approved tint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and as directed. |
| 34 | Material and labour for Reinfroced Cement Concrete 1:1.5:3 using 20mm stone aggregate for gate pillars, columns and posts etc complete all as specified and as directed. |
| 35 | Material and labour for Reinfroced Cement Concrete 1:1.5:3 using 20mm stone aggregate for beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 36 | Material and labour for Reinfroced Cement Concrete 1:1.5:3 using 20mm stone aggregate for fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like etc complete all as specified and as directed. |
| 37 | Supply and fix mild steel TMT bars 10 mm dia bars cut ot length bent to shape required including cranking, bending spirally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 38 | All as per Ser item No 37.00 above but 6 mm dia in stirrups, spacers and binders. |
| 39 | Material and labour for form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, complete all as specified and as directed. |
| 40 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 41 | Material and labour for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and as directed. |
| 42 | Material and labour for Machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed. |
| 43 | All as per Ser item No 42.00 above but except pavers, complete all as specified and as directed.NOTE :- Old serviceable interlocking paver blocks obtained from demolition / dismantling shall be reused. |
| 44 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 45 | Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set with grey cement and no pigments, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed of (1:6) cement mortar complete all as specified and as directed. |
| 46 | Material and labour for providing 100mm thick vaccum dewatered floor of Ready Mix Concrete (M-25 grade) including side shuttering (MS channel) and vibrating the same using double screed vibrator, removal of excess water using vaccum pump, suction matt, floating and revolving of concrete to the required finish using skin floater and power trowel complete all as specified and as directed. |
| 47 | Supply and application of non metallic floor hardner @ 3 Kg/Sqm on wet concrete mate (SIKA / FOSROC or equivalent) complete all as specified and as directed. |
| 48 | Cutting the groove of size 3mm x 20mm using diamond cutter on vaccum dewatered floor and filling the same with bitumen complete all as specified and as directed. |
| 49 | Providing and laying Plain Cement Concrete, type B0 (1:2:4) usnig 12.5mm graded aggregate as in padding concrete over roof slab 30mm to 40mm average thickness up to floor five level, excluding the cost of centering, shuttering complete all as specified and as directed. |
| 50 | Material and labour for 12 mm thick cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand), complete all as specified and as directed. NOTE :- Work shall be executed at a height of 9.00 Mtr. |
| 51 | Supply only integral liquid water proofing compound complete all as specified and as directed. |
| 52 | Providing and applying HS TPO Membrane of 1.2mm thick over the layer of 200gsm Geo-Textile with overlap joints of 75 mm in both longitudinal and transverse direction of the TPO and sealed properly with hot air welding and terminate TPO at the top of parapet wall with terminating strip and fix it by screw at 300 mm c/c and sealed with HS Joint seal PU on top including surface preparation like remove all loose gravels, dirt, oil, grease, and other foreign particles by jet or dry air and clean the surface mechanically or by grinding to make it smooth before application and PCC / cementitious coving of 75 mm radius shall be provided at all junctions between vertical and horizontal faces before application of TPO completely as per specification and direction.NOTE :- Work shall be carried out through authorised applicator of M/s Berger or equivalent in ASIAN / FORSOC / TIKKI / STP. |
| 53 | Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-Charge beyond 50 m initial lead, for all leads including all lifts involved all as directed. |
| 55 | Taking down corroded sign board of frame SS pipe with MS sheet of various sizes from the existing position of different location complete in all respects including removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply, fabricate, polishing and fixing stainless steel board stand or frame work with following dia SS heavy pipe (SS 304 Grade) as per site requirement for fixing ACP (Aluminium Compost Panel) of various sizes properly complete all as specified and as directed by Engineer-in-Charge.NOTE :- Earth work PCC work and ACP sheet shall be measured and paid separately under relevant item here-in-after. |
| 57 | (i) 50mm dia |
| 58 | (ii) 20mm Dia |
| 59 | Supply and fix 3mm thick ACP sign board sheet of various sizes with all required items of work including writing details of installation/ machinery details etc with both side or one side vinyl pasting on radium sticker letters/ sketch fixed to SS frame or wall with nuts, bolts or screws or any other suitable arrangements complete all as specified and as directed by Engineer-in-Charge.NOTE :- SS stand and frame where ever necessary shall be measured and paid separately under Item No. 56.00 here-in-before. |
| 60 | Supply only SS Ball of dia not less than 50mm on SS stand complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Uprooting or scrubbing plants / shrubs / flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. |
| 62 | Supply and fix in repairs, Stainless steel Alphabets letters Hollow type, Glossy / Matt finished, fabricated with thickness not less than 1.8 mm of stainless sheet of grade 304, including fixing and fitting arrangement at any height not greater than complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender