Tender For Strenghtening And Upgradation Of Road From Shib Bari Hut More Towards Christian Burial Ground Under Gangar Ur Municipailty In The District Of Dakshin Dinajpur ( L -1050 M).
Tender Value
96.89 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
1.93 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Strenghtening And Upgradation Of Road From Shib Bari Hut More Towards Christian Burial Ground Under Gangar Ur Municipailty In The District Of Dakshin Dinajpur ( L -1050 M).
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal ofunserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. (Reference to MoRT&H's specification clause 201)3(II) By Mechanical Means3(II)(A) In area of light jungle |
| 2 | Construction of Embankment with Material obtained from Borrow pitsConstruction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading,grading to required slope and compacting to meet requirement of table 300-2 & 300-1 .The size course material in the mix of earth ordinarily shall not be exceed 75mm.(Reference to MoRT&H's specification clause 305) Cost of compensation for Earth material & its carriage from private land at 5km distance have been included in the rate. |
| 3 | By Mix in Place MethodConstruction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending uponthe required grading , spreading in uniform layers with motor grader onprepared surface, mixing by mix in place method with rotavator andcompacting with vibratory roller toachieve at least 98% of the maximumdry density for the material determined as per IS:2720 (Part 8),complete as per clause 401 desire density, complete as per clause 401 Rate per cum for grading-V Material |
| 4 | Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stagesto proper grade and camber, applyingand brooming requisite type of screening/ binding Materials to fill upthe interstices of coarse aggregate,watering and compacting to therequired density (eference to MoRT&H's specification 404).9A By Manual Means9A(i) Grading-1(Table 400-9)9A (i)(b) Using Screening (Table 400-10)Type-A (13.2 mm aggregate) PAKUR |
| 5 | Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stagesto proper grade and camber, applying and brooming requisite type ofscreening/ binding Materials to fill up the interstices of coarse aggregate,watering and compacting to the required density (Reference to MoRT&H's specification 404).9A By Manual Means9A(ii) Grading-2 (Table 400-9) 9A (ii)(b) Using Screening (Table 400-10)Type-B (11.2 mm aggregate) |
| 6 | Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C.a) Type - I (80 mm thickness) inter locking system (i) Grey |
| 7 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting,finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200).8B PCC Grade M20 Using Concrete Mixer |
| 8 | Providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when signs with maximum side dimensions do not exceed 600mm, or with aluminium sheeting 2.0mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801).4(i) 90 cm equilateral triangle |
| 9 | 4(ii) 60 cm equilateral triangle |
| 10 | 60 cm circular |
| 11 | 4(v) 60 cm x 45 cm rectangular |
| 12 | 90 cm high octagon |
| 13 | Direction and Place Identification Signs upto 0.9 sqm Size Board :-Providing and erecting direction and place identification retroreflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing (Reference to MORT&H's specification 801). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender