Tender For Supply And Installation Of Single Phase And Three Phase Streetlight Controller In Coimbatore City Municipal Corporation - North Zone Ward Areas Roc No. 4689/2026/Md4
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
4 days left
EMD
49500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Single Phase And Three Phase Streetlight Controller In Coimbatore City Municipal Corporation - North Zone Ward Areas Roc No. 4689/2026/Md4
BOQ
| Sl. No. | Item Description |
| 1 | Supply and Installation of Single Phase Streetlight controller with RF based Gateway controller Device capability of scheduling the on/off timings of lighting control switchgears based on preset timings or based on the available annual sun-rise and annual sun-set timings with GPRS/GSM based remote streetlight monitoring system with capacity for self-protection from short-circuit, over voltage and anti-theft alert including the 1) System capability to capture and provide following parameters at variable time-intervals a) live data collection of:b) Voltages c) MCB trips d) Power Factor e) Active Power (kW) f) Metering kWh cumulative g) Number of hours the lamps were glowing 2) Special emergency on/off facility with wireless control. 3) Benchmarking capacity so as to generate alert message for:a) Phase-wise currents on crossing threshold values b) Phase-wise voltages on crossing threshold values c) MCB trips d) Theft alerts e) Switching component failure f) No output supply 4) Alert notifications shall be forwarded to android apps.5) Alert for Door open.6) Enclosure Box to be IP55 compliant and in case of Metal enclosure has to be corrosion-resistant.7) 4G modem used should be a Dual-band modem with power consumption less than 5 watts. 8) Energy Meter with ISI marking should be used for power measurement. Class 1.0 accuracy or better energy meter to be used.9) The rating of the Streetlight controller should be at least two times the lighting load. 10) The Streetlight Controller should have inbuilt RF Gateway device to be used in conjunction with Individual Lamp Monitoring (ILM) devices for future proof.11) Design life should be more than 10 years 12) IN built GATEWAY SPECIFICATIONS a) Processor: Single board computer.b) Powe supply:90 VAC, 50 Hz c) Surge protection:CATB(6kv/3A),Optional:CATC(20kv/10kA). d) RFCommunication:Frequency:865MHzISMband e) Hardware: IEEE 802.15.4g PHY f) Transmit Power: +14 dBm g) Receiver Sensitivity: -110 dBm h) Network Fault Tolerance: Self-healing mesh i) Data Protection: AES-128 encryption j) Communicationoptions:4G and inbuilt WIFI/ETHERNET optional communications for future purpose k) Operating conditions: -30°C to +70°C l) Enclosure: IP65 Enclosure m) Protection: Voltage and Current sensing for Voltage and Current related protection n) Load Control Capacity: 32/63 Amps o) Auto MCB trip rectifier: To remotely rectify nuisance MCB trips |
| 2 | Supply and Installation of Three Phase Streetlight controller with RF based Gateway controller Device capability of scheduling the on/off timings of lighting control switchgears based on preset timings or based on the available annual sun-rise and annual sun-set timings with GPRS/GSM based remote streetlight monitoring system with capacity for self-protection from short-circuit, over voltage and anti-theft alert including the 1) System capability to capture and provide following parameters at variable time-intervals a) live data collection of:b) Voltages c) MCB trips d) Power Factor e) Active Power (kW) f) Metering kWh cumulative g) Number of hours the lamps were glowing 2) Special emergency on/off facility with wireless control. 3) Benchmarking capacity so as to generate alert message for:a) Phase-wise currents on crossing threshold values b) Phase-wise voltages on crossing threshold values c) MCB trips d) Theft alerts e) Switching component failure f) No output supply 4) Alert notifications shall be forwarded to android apps.5) Alert for Door open.6) Enclosure Box to be IP55 compliant and in case of Metal enclosure has to be corrosion-resistant.7) 4G modem used should be a Dual-band modem with power consumption less than 5 watts. 8) Energy Meter with ISI marking should be used for power measurement. Class 1.0 accuracy or better energy meter to be used.9) The rating of the Streetlight controller should be at least two times the lighting load. 10) The Streetlight Controller should have inbuilt RF Gateway device to be used in conjunction with Individual Lamp Monitoring (ILM) devices for future proof.11) Design life should be more than 10 years 12) IN built GATEWAY SPECIFICATIONS a) Processor: Single board computer.b) Powe supply:90 VAC, 50 Hz c) Surge protection:CATB(6kv/3A),Optional:CATC(20kv/10kA). d) RFCommunication:Frequency:865MHzISMband e) Hardware: IEEE 802.15.4g PHY f) Transmit Power: +14 dBm g) Receiver Sensitivity: -110 dBm h) Network Fault Tolerance: Self-healing mesh i) Data Protection: AES-128 encryption j) Communicationoptions:4G and inbuilt WIFI/ETHERNET optional communications for future purpose k) Operating conditions: -30°C to +70°C l) Enclosure: IP65 Enclosure m) Protection: Voltage and Current sensing for Voltage and Current related protection n) Load Control Capacity: 32/63 Amps o) Auto MCB trip rectifier: To remotely rectify nuisance MCB trips |
| 3 | Supply and Run of 3/20 (2.5 sq.mm) Single Straand Copper Wire Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender