Tender For Sinking Well And Providing Motor ,Cable And Pipe At Infiltrationwells And Allied Work In Vegavathy Booster River Bed In Kancheepuram Corporation.
Tender Value
11.50 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
11500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanchipuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Sinking Well And Providing Motor ,Cable And Pipe At Infiltrationwells And Allied Work In Vegavathy Booster River Bed In Kancheepuram Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and delivery of Duty lpm x m 600 x 40, Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The nonreturn valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20HP and Auto Transformer starter for above 20HP starting and for continuous operation. TWAD SOR(10HP) Motor.(WD-M1779) p.no. 124 |
| 2 | Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). 5 HP Three Phase Panel board Starter .(WD-M1912) p.no.134. |
| 3 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately).10 HP Three Phase Panel board Starter (WD-M1916) p.no.1345 |
| 4 | Supply of PVC Insulated and sheathed 3 core 6 sq.mm flat type copper cable conforming to IS 694/1990 and as amended therafter(WD-M1976)p.no.141 |
| 5 | Supply delivery of L.T. Cables 3 Core 25sq mm 1.1 KV grade Armoured Aluminium Conductor cross Linked poly Ethylene Insulated PVC Sheathed Cables Conforming to is 7098 (PART I)/1988 and as Amended Thereafter with ISI Marking (WD-M1962) p.no.140 |
| 6 | 3 Core 25sq mm cable laying below GL including earth work (WD-M2016) p.no.143 |
| 7 | Supply delivery of 110 mm HDPE Pipes - PE 100 as per IS 4984/2016 - PN 6 basic rates inclusive of transportation charges to stockyard excluding unloading , stacking at stock yard and Cost of loading from Stockyard and unloading at site,Conveyance from stock yard to site (maximum of 8Km radius) etc complete.,(WD-M0188) p.no.16 |
| 8 | The Rates for Earth work Excavation and for pipe line works haveing bed width of 1.25M Below On Linear Measurement basis ( Earth work for 110 mm HDPE Pipe ) (WD-W0705 ) p.no.211 |
| 9 | The Rates for Refilling work and for pipe line works haveing bed width of 1.25M Below On Linear Measurement basis ( Refilling work for 110 mm HDPE Pipe ) (WD-W0705 ) p.no.211 |
| 10 | Manufacture, Supply and Delivery of 65mm DI D/F Slanted seat Swing Check Non - return Valve. Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 TWAD SOR.(WD-M1219) p.no.80 |
| 11 | Supply and Delivery 65mm G I Pipe (Medium) AS PER IS 1239/PART I/2004 TWAD SOR (WD-M0490) p.no.30 |
| 12 | GI .SPECIALS PIPESG.I. Elbow |
| 13 | G.I.Tee |
| 14 | G.I.Couplings |
| 15 | G.I.Bend |
| 16 | G.I. Flange set |
| 17 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days ( WD-W0871 ) Page no. 226 |
| 18 | Sinking well below water level ordinary or loose soil including all incidental charges using special tools and plants such as air compressor, helmet etc., complete and including baling out water.For 5.00 metre dia (internal) TWAD (si.no. 3 i) p.no.174Fifth depth of 2 metres Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender