Tender For Construction Of Community Sanitary Complex Near Old Masjid Sharief At Safapora-B Block Safapora Sbm
Tender Value
3 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
5 days left
EMD
6000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Community Sanitary Complex Near Old Masjid Sharief At Safapora-B Block Safapora Sbm
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: (All kinds of soil) |
| 2 | Providing and laying of dry stone solling, hand packing, levelling and ramming in foundation & trenches including all carriages. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | P/L of D.P.C. 40mm thick with Cement Concrete 1:2:4 (12.5 mm N/S agg ) |
| 6 | Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation & plinth in cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 7 | Extra for B/w above Plinth Level upto Floor V Level |
| 8 | Centering and Shuttering I/c Strutting, Propping etc & removal of formwork (slabs) |
| 9 | Centering and Shuttering I/c Strutting, Propping etc & removal of formwork (plinth) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings,balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforcment for R.C.C. work incl. straightening, cutting, bending, placing in position & binding all complete. (TMT of Fe-500D or more) |
| 12 | Dry random rubble masonry with hard stone in foundation & plinth using Nallah stone |
| 13 | P/F of mild steel door/window frames and shutters complete job |
| 14 | 12 mm Cement plaster on the rough side of single or half brick wall of mix: 1:6 mix |
| 15 | P/L 40mm thick cement concrete flooring (1:2:4) with 20 mm nominal size stone aggregate finished with a floating coat of neat incl cement slurry and curing complete |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Kajaria or Somany or equivalent make as per EIC) |
| 17 | Providing and laying Vitrified Floor tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortor 1:4(1cement:4 course sand), including grouting the joint with whitecement and matching pigments etc. complete job. (Kajaria or Somany or equivalent make as per EIC) |
| 18 | Carriage of Various materials from source to W.S by MT and H.L. Sand for an avg. lead of 10 Kms by MT |
| 19 | Aggregate for an avg. lead of 10 Kms by MT |
| 20 | Stones/ soling for an avg. lead of 10 Kms by MT |
| 21 | Cement and steel for an avg. lead of 5 Kms by MT |
| 22 | Bricks for an avg. lead of 60 Kms by MT |
| 23 | Add provision for Signboard/Photograph (To be paid as per actual during billing with detailed measurements) |
| 24 | Providing & fixing W C Squatting Pan ( Indian type) WC Pan with 100 mm dia PVC \\" P\\" trap +10 litre low level PVC flushing cistern including flush pipe, manully controlled device with all fittings & fixture Complete Long pattern W.C Pan of size 580x440 mm of standard make Cera, Hindware or equivalent as per EIC |
| 25 | Providing and fixing wash basin with pedestal with a 15mm CP Brass single whole basin mixer including all requisite accessories and required connections of standard make Cera, Jaguar, Hindware, Kohler or equivalent as per EIC |
| 26 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement pipes. The rate includes making necessary holes for inlet, outlet & over flow pipes and the base support i/c fittings (Water storage tank) of approved make as per EIC |
| 27 | Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm of approved make as per EIC |
| 28 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4) of approved make as per EIC |
| 29 | External work including trenching, refilling etc. PN-16 pipe , 20mm OD (SDR-7.4) of approved make as per EIC |
| 30 | P/F Door bend 110mm dia pvc of approved make Type B |
| 31 | P/F plain bend 110mm dia pvc of approved make Type B |
| 32 | P/F 110mm dia pvc collar of approved make Type B |
| 33 | P/F plain bend 75mm dia pvc of approved make Type B |
| 34 | P/F 75mm dia pvc collar of approved make Type B |
| 35 | P/F SWR pipes 100mm dia Type B of approved make - complete job |
| 36 | P/F SWR pipes 75mm dia Type B of approved make - complete job |
| 37 | P/F PVC cowel over vent pipe of approved quality Type B |
| 38 | P/F door bend 75mm PVC of approved quality |
| 39 | P/F 100x75 reducer PVC of approved quality |
| 40 | P/F MS stays and clamps for PVC pipe 75mm |
| 41 | P/F floor traps of self cleansing type along with SS jali complete job |
| 42 | P/F CP brass bib cock of approved quality 15 mm dia of standard brand as per EIC |
| 43 | P/F CP brass angle valve of approved make as per EIC |
| 44 | P/F gate valve of 20mm nominal size of approved make as per EIC |
| 45 | Provision for conduits for wiring/fixtures and other unforeseen items (To be paid as per actual during billing with detailed measurements) 4.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender