Tender For Special Repair To Ges Office Under Age B/R-I At Clement Town.
Tender Value
38.84 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
3 days left
EMD
77680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Ges Office Under Age B/R-I At Clement Town.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestoes cement (corrugated, semicorrugated, etc) sheets any gauge, thickness in roof coverings complete all as specified and directed by Engr-in-Charge. |
| 2 | S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge. |
| 4 | Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 5 | Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed. |
| 6 | Returing, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, in any type of soil complete all as specified and directed. |
| 7 | Removing excavated material ( surplus soil) to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specifed and directed. |
| 8 | M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed. |
| 10 | Taking down cement plaster, in any thickness from brick or stone walls,/facia of roof Chajjas,roof projection,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 11 | M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement.Complete all as specified and directed by Engineer in Charge . |
| 12 | M&L for 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for preparation of newly plastered surface of internal wall to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of oil bound distemper over a coat of 1mm thick wall putty on plastered surface using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. |
| 14 | M&L for two coats of cement based paint over a coat of cement wash to newly plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 15 | Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 16 | M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub bases of floor complete all as specified and directed. |
| 17 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) 100 mm thick as in plinth protection/hard standing surface finished even and smooth without using extra cement including surface dressing/leveling complete all as specified and directed by Engineer in Charge . |
| 18 | M & L for Cement concrete, (1:3:6) type C2 (using 40mm graded crushed stone aggregate for surface channels and drains complete all as specified and as directed. |
| 19 | Extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc complete all as specified and as directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 21 | M&L for Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed |
| 22 | M&L for Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed |
| 23 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6. complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for PCC 1:2:4 type B2, using 20 mm graded stone aggregate as in foundations,filling and mass concrete. complete all as specified and directed by Engr-in-Charge. |
| 25 | Material and labour for joint free glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with over & including 10mm thick cement plaster finished fain and even in cm 1:4. complete all as specified and directed by Engr-in-Charge. |
| 26 | Dismantling wall and ceiling boards including cover fillets of any descrition complete all as specified and directed. |
| 27 | S&F Non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/Aluminium frame work with screws 10 mm thick in aluminium snap grid frame work for false ceiling and hanging with 6mm dia GI (upto the 1200 mm length )adjusting level fixed to roof slab by means of ceiling cleats made out of GI flate 40X3mm size 60mm long and expansion hold fasteners 12.50mm dia.40mm dia long complete all as specified and directed |
| 28 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed. |
| 29 | All as item No.28 above but exc 1.50 Sqm and n.exc 4.00 Sqm each. complete all as specified and directed by Engr-in-Charge. |
| 30 | M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed. |
| 31 | M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed. |
| 32 | M&L 30mm thick moulded plain WPC solid door shutter: providing (30mm thick) MOLDED WPC Brown Factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water Water Proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed. |
| 33 | Providing and fixing 32mm thick brand factory made wire mesh solid WPC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mmx40mm for top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufactures, 20mmx40mm M.S. square tubes shall be covered with 6mm thick heat moulded WPC prelaminated 'C' channel of size 30mm thickness, 140mm width out of which 125mm shall be flat and 15mm shall be bent in 90 degree on the either side forming stiles & 6mm thick 165mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on the inner side to from top & bottom rail and 180mm wide WPC sheet out of which 150mm shall be flat and 15mm shall be bent in 90degree on both side to form lock rail, 12mm (6mm x 2) thick,, 20mm wide cross WPC sheet as gap insert for top rail & bottom rail, Pannel will be of stainless steel, wiremesh of 24 gauge to be fitted in by 'C' channel of size 32mmx10mm on the either side in the stiles, the inner side 'C' channel is fixed by 20mm x 40mm MS tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with 20mm x 40mm tube wiith stainless steel, wire mesh gauge interior at top, bottom & lock rail. 10mm x 20mm stainless steel pipe griill fix with MS frame for support wire mesh as per selected design an additional 6mm thick WPC strip of 22mm width is to be stuck on the interior side of the C channel using solvent cement adhesive etc, complete all as specified and directed. |
| 34 | Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed. |
| 35 | S& F in repairs GI tubing 25mm bore, medium grade galvanised with all fitting ISI marked fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 36 | S& F in repairs GI tubing 20mm bore, medium grade galvanised with all fitting ISI marked fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 37 | S& F in repairs GI tubing 15mm bore, medium grade galvanised with all fitting ISI marked fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed. |
| 38 | M&L for preapration of old concrete surface or unplastered surafces on wall with two coats of oil bound distemper on wall surfaces over a coat of putty complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for preparing old steel and iron surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repair PVC hollow section heavy grade designer wall panelling 5.5-6mm thick as approved by Engg-in-charge fixed in position including all matching beading, angle for jambs, cills etc complete all as specified and directed. |
| 41 | M&L for preparation of old surfaces on walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on old decorated surfaces complete all as specified and directed by Engr-in-Charge |
| 42 | Dismantling old paver block complete all as specified and directed |
| 43 | M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed. |
| 44 | M&L PCC 1:4:8 type C -2 using 40 mm graded aggregate 100 mm thick as in sub base, floor & pavings, all as specified |
| 45 | M&L Framed work such as grills, gratings ,tublar truss etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; framed angle for chain link fixing, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including dismantling old complete all as specified and as directed. |
| 46 | S/F 100 mm long mild steel butt hinges medium weight complete all as specified and directed. |
| 47 | S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed. |
| 48 | S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 49 | S&F aluminum bow handle \\"D\\" type anodized 150mm long complete all as specified and directed. |
| 50 | S&F for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod ,incl taking down old curtain rod or pelmet boxes..Complete all as specified and directed by Engineer in Charge . |
| 51 | Dismantling timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed. |
| 52 | M&L for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint (Ist quality)over a coat of red oxid primer. Complete all as specified and directed |
| 53 | M&L for Granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like inover & including 15 mm thick cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match. complete all as specified and directed by Engr-in-Charge. |
| 54 | S & F in repair for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor. complete all as specified and directed by Engr-in-Charge. |
| 55 | Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device. complete all as specified and directed by Engr-in-Charge. |
| 56 | Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc) complete all as specified and directed |
| 57 | S & F in repair for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe complete all as specified and directed. |
| 58 | S & F in repair for pillar taps 15 mm , cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed. complete all as specified and directed |
| 59 | Supply and fix in repair PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity. complete all as specified and directed. |
| 60 | Supply and fix in repair flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, complete all as specified and directed. |
| 61 | Supply and fix in repair vitreous china urinals, size 635 x 395 x 420mm, white, half stall long body type, complete all as specified and directed. |
| 62 | S&F in repair Vitreous china urinal partion white 310X700mm complete all as specified and directed. |
| 63 | Supply and fix in repair PVC connection 15 mm size with PTMT nuts of length 600 mm in repair complete all as specified and directed. |
| 64 | Supply and fix in repair for push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia in repair. complete all as specified and directed. |
| 65 | Supply and fix in repair for urinal spreader of chromium plated fiting with 15 mm dia pipe.in repair complete all as specified and directed. |
| 66 | Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 67 | Supply and fixing in repair in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair. |
| 68 | Supply and fixed in repair angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange . complete all as specified and directed. |
| 69 | Taking down UPVC (SWR) pipes any dia. complete all as specified and directed. |
| 70 | Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed. |
| 71 | Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified and directed. |
| 72 | Supply and fix PVC (SWR) bends any radius 75 mm dia of bore. complete all as specified and directed. |
| 73 | Supply and fix PVC (SWR) bends any radius 110 mm dia of bore. complete all as specified and directed. |
| 74 | Supply and fix in repairs PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement. complete all as specified and directed. |
| 75 | Supply and fix in repairs PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement. complete all as specified and directed. |
| 76 | S&F Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified and directed. |
| 77 | S&F Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 78 | S&F Anodised aluminium powder coated window and ventilators shutters sliding or fix type, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,including provision of lock in each door, rollers, anodised aluminum snap beading screws etc. complete all as specified |
| 79 | S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion. |
| 80 | S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion. |
| 81 | S & F sheet glass thick ordinary quality in n exc 0.75 Sqm in each pan 4 mm thick with rubber beading as in window. |
| 82 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 83 | Taking down existing tar felt and Pcc,plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises with and including M&L 25mm thick Pcc 12.5 mm graded aggregate B 0 for finshing existing surface even & smooth and laying water proofing treatment to the Roof with single component, cold applied, water based Polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the Roof @ 1.2kg/per sqm to confirms to ASTM D 6083- 97a with a density of 1.25 to 1.3kg/per ltr, having tensile strength of 1.5N/mm2, having elongation of 350°/o with solid content not less than 60% in 2 coats including self-priming bond coat of Advanced Latex plus mixed Water and Cement in 1:4:7 and sandwiching 40gsm Geo-textile between two coats. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification and direction of the Engineer ln charge. |
| 84 | S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank. complete all as specified and directed. |
| 85 | S&F in repairs Looking size 600 mm X 450mm mirror of selected quality glass 5mm thick bevelled edge mirror selected quality with side ingraving/design fixed with SS fastner nut in repair.complete all as specified and directed |
| 86 | Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed |
| 87 | Taking down carefully unserviceable MCB TPN/DBs of any type/size with MCBs and disconnecting and making good disturbed surfaces complete all as specified and directed. |
| 88 | S&F in repair Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. complete all as specified and directed.Note : Wiring shall be done in proper colour coding. |
| 89 | M & L for point wiring with 1.5 Sqmm two line single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm one line copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engr In Charge for the following :- |
| 90 | All as per item No 89 above but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and directed |
| 91 | All as per item No 89 above but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and directed |
| 92 | All as per item No 89 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm two line copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 sqmm one line as earth wire FRLS PVC insulated in green color all as directed by engr-in-charge. |
| 93 | S&F for Modular Socket, 6A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and directed |
| 94 | S&F for Modular switch 1 module 6A,1 module , 240 volts ISI marked complete all as specified and directed |
| 95 | S&F for ceiling rose, 3 Pin/PVC/polycarbonate isolated body ISI marked complete all as specified and directed |
| 96 | S&F for Modular switch 1 way 16A, 1 module , 240 volts ISI marked complete all as specified and directed |
| 97 | S&F for Modular Socket 6A/16A - 6 pin combined 2 module, , 240 volts ISI marked complete all as specified and directed |
| 98 | S&F for Modular Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 99 | S&F in repair for Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed. |
| 100 | S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete all as specified and directed. |
| 101 | S&F of Vertical Distribution Board (TPN) 4 way double door suitable for TPN 4 pole 100 Amp 16 KA four pole as incomer, it should be IP 43 protected with Copper Bus bars, Neutral Links, Earthing bar complete all as specified and directed. |
| 102 | M&L for distribution board sheet steel powder coated for MCBs with copper bus bar and neutral link earthing stud 8 way 240 volts double door complete all as directed by Engr-in-Charge.Note:- Distribution board and MCBs should be same make. complete all as specified and directed. |
| 103 | S&F in repair for MCB SPN , 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 40 Amps Complete with connection testing and commissioning. complete all as specified and directed. |
| 104 | S&F in repair for MCB SP, 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 AMP Complete with connection testing and commissioning. complete all as specified and directed. |
| 105 | M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion including dismantling old complete all as specified and directed. |
| 106 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 107 | Supply and fixing in repair of 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN 4P, upto 125 Amps of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. |
| 108 | Supply and fixing for Fan step regulator, 100W - 1 module 240 volts ISI marked complete all as specified and directed |
| 109 | Disconnecting and taking out defective underground cable any size and any type from trenches, roof, pole, pipe, floor, wall etc complete all as specified and as directed. |
| 110 | Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 25 Sqmm 4 core laid in trenches / on poles / road crossing or passing through existing / new pipe under road crossing, clamping on wall etc complete all as specified and as directed. |
| 111 | Supply and fixing in replacement ceiling fans complete with blades, down rods and accessories, 230V, 1200 mm sweep. Five star rated, suitable for fan regulator operating with brushless direct current motor (BLDC) complete. complete all as specified and directed by Engr-in-Charge. |
| 112 | Supply and fixing in replacement exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, frame and louvers for 300 mm dia Exhaust fan. Plastering/Painting for making good to the original surfaces of any description. complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F in repair Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete all as specified and directed by Engr-in-Charge. |
| 114 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engr-in-Charge. |
| 115 | NOTES :-1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender