Tender For Provision Of Certain Sanctioned Works At Dmrl & Drdl Area Under Age B/R And Age E/M Ge(I) R&D Kanchanbagh.
Tender Value
34.30 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
4 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Sanctioned Works At Dmrl & Drdl Area Under Age B/R And Age E/M Ge(I) R&D Kanchanbagh.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | postpone dt | Date | 25-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of complete all as specified and as directed by Engr-in-Charge. |
| 2 | Providing and laying cement concrete (1:3:6) (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing complete all as specified and as directed by Engr-in-Charge. |
| 3 | Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in Cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:4 and be finished even and smooth without using extra cement all as specified as directed by Engr-in-charge. |
| 5 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed by Engr-in-Charge. |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete all as specified and as directed by Engr-in-Charge. |
| 7 | Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 12.65.1 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. sqm complete all as specified and as directed by Engr-in-Charge. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works incl preparation of surface. |
| 9 | 600mm dia stainless Steel Turbo ventilators with Polycarbonate base fixed on roof with self tapping screws ete complete all as directed by Engineer-in-Charge. |
| 10 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m in ordinary rock complete all as specified and as directed by Engr-in-Charge. |
| 11 | Removing excavated soil to a distance n.exceeding 50m and depositing where directed at level n.exc 1.5m above starting pont complete all as specified and as directed by Engr-in-Charge. |
| 12 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and as directed by Engr-in-Charge. |
| 14 | Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 12.65.1 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200mm, depth of 32mm, overall profile width 1092mm, cover width 1000mm. sqm complete all as specified and as directed by Engr-in-Charge. |
| 15 | Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed . |
| 16 | S&F in repair printed roller blinds with all fittings (to be matched with existing patterns) & taking down old venetian blinds complete all as specified and as directed by Engr-in-Charge. |
| 17 | M&L Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed by Engr-in-Charge. |
| 18 | M&L cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 75 mm thick with 20 mm nominal size stone aggregate complete all as specified and as directed by Engr-in-Charge. |
| 19 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. With granite stone of area less than 0.50 sqm.complete as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting complete all as specified and as directed by Engr-in-Charge. |
| 21 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge. |
| 22 | Providing and laying in position cement concrete of grade 1:4:8 (1 cement 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering All work up to plinth complete all as specified and as directed by Engr-in-Charge. |
| 23 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter having rough finished surfaces of concrete flat surfaces completed |
| 24 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)having rough finished surfaces of concrete flat surfaces complete all as specified and as directed by Engr-in-Charge. |
| 25 | Formwork to chullah hoods, chajjas, troughs and similar items including edges having rough finished surfaces of concrete flat surfaces complete all as specified and as directed by Engr-in-Charge. |
| 26 | M & L for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 standings, balconies, shelves. chajjas, Intels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement nominal concrete (1 cement: 1.5 coarse sandizone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) completed all as specified complete all as specified and as directed by Engr-in-Charge. |
| 27 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge. |
| 28 | Surface excavation in All kinds of soil not exceeding 30 cm in depth averaging 15cm deep and getting out but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: |
| 29 | Supplying and laying hard stone not exc 63mm gauge deposited, spread and leveliling in layers not exc 15 cm thick watered and rammed to true surface with broken stone or boulder complete all as specified and as directed by Engr-in-Charge. |
| 30 | Providing and laying in position cement concrete of grade Type C2 1:3:6(1 Cement : 3 coarse sand (zone-III) derived from natural sources graded stone aggregate 40 mm nominal size derived from natural sources excluding the cost of centering and shuttering All work up to plinth complete all as specified and as directed by Engr-in-Charge. |
| 31 | Providing and laying 100mm thick cement concrete of grade Cum 1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources 4 graded stone aggregate 40 mm nominal size derived from natural sources as in plinth protection (joints to be provided 2mm thick at regular intervals & corners) completed all as specified and directed by Engr-in- charge. |
| 32 | Cutting out bricks,forming toothing for,and bonding with CM 1:4 new into old work including value of new materials entering oldwalls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and as directed by Engr-in-Charge. |
| 33 | Cutting out concrete blocks, slabs, brickwork or stone masonry(in alternate course), forming toothings for and bonding new work in cement mortar 1:6 into old work, including new materials entering old wall completed complete all as specified and as directed by Engr-in-Charge. |
| 34 | M&L brick work with common burnt clay F.P.S (non modular) bricks of class B in super structure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:4 complete complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 completed and specified by Engr-in-Charge |
| 36 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Celesetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire etardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 37 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of glass A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- harge. |
| 38 | Providing and fixing factory Solid PVC Door Frame of size 50mm x 47mm made out of 9,5 mm wood grain printed colour PVC sheetreinforced with MS. Square tube, suppling & fixing in opening & edges will be painted tomatch with printed sheet as per specification and direction of engr-in-charge |
| 39 | Providing and fixing Factory made solid panel PVC door shutter 30mm thick plain PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom tails. MS frames shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colur PVC sheets for top rail, lock rail on either side and as insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F Extruded aluminium alloy handles 125mm length, fabricated type anodised complete all as specified and as directed by Engr-in-Charge. |
| 41 | S&F Aluminium alloy, anodised, sliding door bolt 250mm length with hasp staple (boll type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 42 | Providing and fixing ISI marked SS butt hinges 100 x 6.00 50 x 1.90mm medium weight, cold rolled mildsteel, and fixed bright finished with necessary screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 43 | Providing and fixing aluminium barrel tower bolts 150 x 10mm, 2.00 ISI marked, anodised (anodic coating not less than grade AC 10 as per 15: 1868) transparent or dyed to required colour or shade with necessary screws etc complete all as specified and as directed by Engr-in-Charge. |
| 44 | Supply and fixing factory made uPVC white colour two track fixed glazed window/ventilator made of small series)frame 47 x 50 mm one for glass and another for wire mesh frame complete after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, Il complete as per approved drawing & direction of Engineer-in-Charge (Glass shall be paid separately and wire mesh paid seperately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension ie in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by Engr-in-Charge. |
| 45 | Providing & fixing glass panes. Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in eachpane in uPVC doors/windows/ventilators complete all as specified and as directed by Engr-in-Charge. |
| 46 | Providing & fixing Galvanised mild steel wire cloth, 0.63mm. nominal dia of wire and average width of aperture 1.40mm and flzed with tinned tacks, or galvanised wire staples on both sides complete all as specified and as directed by Engr-in-Charge. |
| 47 | M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:4 and be finished even and smooth without using extra lime or cement all as specified as directed by Engr-in-chief. |
| 48 | M&L for Distempering Two or more coats on new work on walls with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer's specification with Priming plastered and other surfaces with alkali resistant priming paint over one coat of 2mm thick wall care putty completed all as specified and directed by Engr-in- charge |
| 49 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade on New work (Two or more coats applied @ 1.43ltr /10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm completed all as specified and directed by Engr-in-charge. |
| 50 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting outexisting benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required of 150mm bore complete all as specified and as directed by Engr-in-Charge. |
| 51 | S&F PVC (SWR) pipes, 75mm bore of pipe single socketed in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab beam or parapet etc and making good with cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 52 | S&F 75mm PVC(SWR) bend any radius of required degree with access door insertion rubber washer 3mm thick, complete all as specified and as directed by Engr-in-Charge. |
| 53 | S&F PVC (SWR) pipes, 110mm bore of pipe single socketed in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab beam or parapet etc and making good with cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 54 | S&F 110 mm PVC(SWR) bend any radius of required degree with access door insertion rubber washer 3mm thick, complete all as specified and as directed by Engr-in-Charge. |
| 55 | Providing and fixing PVC (SWR) floor trap of size 75mm outlet plain with grating including jointing with solvent cement including all necessary fittings complete all as specified and as directed by Engr-in-Charge. |
| 56 | Supplying and laying of 20mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings like bends, clamps and tees etc.. in fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-charge |
| 57 | S&F in Fancy Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or or brass ferrule and fixed complete all as specified and as directed by Engr-in-Charge. |
| 58 | Supply and fixing Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and as directed by Engr-in-Charge. |
| 59 | Supply and fixing 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets complete in all respect complete all as specified and as directed by Engr-in-Charge. |
| 60 | Supply and fixing Vitreous China Urinal, full stall type, white including Urinal partitions slabs terminating about 40cm above floor line(excluding flushing cistern, flush pipe and waste pipe)complete all as specified and as directed by Engr-in-Charge. |
| 61 | Supply and fixing Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed by Engr-in-Charge. |
| 62 | S&F for Grating doom 125 mm dia with waste hole of ss. (Minimum weight 40gms) complete all as specified and as directed by Engr-in-Charge. |
| 63 | S&F for Waste fittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-Charge. |
| 64 | S&F for 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and feed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-Charge. |
| 65 | S&F for Brass Chromium plated Tubular towel rail. 20mm dia, D type, 60cm long between flanges completed with necessary screw fittings to wall surfaces complete all as specified and as directed by Engr-in-Charge. |
| 66 | S&F for Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F for PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed by Engr-in-Charge. |
| 68 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge. |
| 69 | S&F for 15mm bore Pillar taps, cast copper alloy fancy type, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge. |
| 70 | S&F for 15mm Stop valves, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-Charge. |
| 71 | M&L for Cast iron floor trap 100mm outlet dia, with grating including jointing to waste pipe fixed incement concrete type B-1 (1:2:4) complete all as specified and as directed by Engr-in-Charge. |
| 72 | S&F for brass Chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and as directed by Engr-in-Charge. |
| 73 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and as directed by Engr-in-Charge. |
| 74 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor tiles completed all as specified and directed by Engr-in-Charge. |
| 75 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering on fair faces of brickwork or concrete surfaces in cement mortar 1:4 for fixing of tiles complete all as specified and as directed by Engr-in-Charge. |
| 76 | Excavating in post holes (or similar holes) in all kinds of soll each not exc 0.5cum, getting out, returning, filing in and ramming earthor broken rubble mixed withearth around, in tayers not exceeding 25 cmcomplete all as specified and as directed by Engr-in-Charge. |
| 77 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St-240 with painted one shop coat of zinc chromate primer paint (including preparation ofsurface) at Contractor's workshop before fabrication complete all as specified and as directed by Engr-in-Charge. |
| 78 | Providing and laying in position cement concrete of grade 1.2.4 (1 cement 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering All work up to plinth complete all as specified and as directed by Engr-in-Charge. |
| 79 | Painting to steel Surfaces of any description, over 10cm in width or girth not otherwise described with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new surfaces complete incluidng a coat of approved steel primer (red oxide primer) complete all as specified and as directed by Engr-in-Charge. |
| 80 | Providing and fixing precoated Galvalume profile sheets (size. shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete all as specified and as directed by Engr-in-Charge. |
| 81 | Supplying and laying hart stone not exc 63mm guage deposited, spread and levelling in layers not exc 15 cm thick watered and rammed to true surface with broken stone or boulder complete all as specified and as directed by Engr-in-Charge. |
| 82 | Providing and laying in position cement concrete of grade 1:4:8(1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering complete all as specified and as directed by Engr-in-Charge. |
| 83 | Providing and laying in position cement concrete of grade Cum 1.2.4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering complete all as specified and as directed by Engr-in-Charge. |
| 84 | Extra for making chequers of approved pattern on cement concrete floors, steps, landings, pavements etc complete all as specified and as directed by Engr-in-Charge. |
| 85 | Providing and fixing factory Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening & edges will be painted to match with printed sheet as per specification complete all as specified and as directed by Engr-in-Charge. |
| 86 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos glazed & one no, wire meshpanels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm. both having wall thickness of 2.3+0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, inc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including rilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) |
| 87 | Providing & fixing glass panes. Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in eachpane in uPVC doors/windows/ventilators complete all as specified and as directed by Engr-in-Charge. |
| 88 | Providing & fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and flzed with tinned tacks, or galvanised wire stapleson both sides complete all as specified and as directed by Engr-in-Charge. |
| 89 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 tandings, balconies, shelves. chajjas, Intels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of contering shuttering, finishing and reinforcement with M20 Grade (1 cement: 1.5 coarse sandi (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and as directed by Engr-in-Charge. |
| 90 | Providing and fixing ISI marked MS pressed butt hinges 100 x 58 x 1.90mm medium weight, cold rolled mildsteel, and fixed bright finished with necessary screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 91 | Providing and faing aluminium barrel tower bolts 150 x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc complete all as specified and as directed by Engr-in-Charge. |
| 92 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 + 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm) comprising of PVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 + 0.2 mm thick galvanized mid steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket. G1 fasteners 100 x 8 mm size for fuing frame to finished wall, plastic packers plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, shall be complete as per approved drawing & direction of Engineer-in-Charge (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by Engr-in-Charge. |
| 93 | S&F Extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed by Engr-in-Charge. |
| 94 | S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge. |
| 95 | S&F for Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by Engr-in-Charge. |
| 96 | M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:6 and be finished even and smooth (without using extra lime or cement) complete all as specified and as directed by Engr-in-Charge. |
| 97 | M&L for Rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and be finished even and smooth (without using extra lime or cement) complete all as specified and as directed by Engr-in-Charge. |
| 98 | M&L for Distempering Two or more coats on new work on walls with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer's specification with Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed by Engr-in-Charge. |
| 99 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. New work (Two or more coats applied @ 1.43ltr /10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm complete all as specified and as directed by Engr-in-Charge. |
| 100 | S&F PVC (SWR) pipes, 75mm bore of pipe single socketed in any length with rubber ring joints, fixed in position with walls including enlarging existing hole in slab beam or parapet etc and making good with cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 101 | S&F 75mm PVC(SWR) bend any radius of required degree with access door insertion rubber washer 3mm thick, complete all as specified and as directed by Engr-in-Charge. |
| 102 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed by Engr-in-Charge. |
| 103 | S&F for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed by Engr-in-Charge. |
| 104 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mm x 30mm x 160mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed by Engr-in-Charge. |
| 105 | S&F for Brass Chromium plates Tubular towel rail. 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engr-in-Charge. |
| 106 | S&F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge. |
| 107 | Providing and fixing 12.5mm thick tapered edge Glass reinforced Gypsum board of size 600 x 600mm conforming to IS:2095 (Part 3) 1996 false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from MS sheet and galvanised with zinc coating of 120gms/ sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flanges fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 50mm of required length with nut & bolts of required size complete all as specified and as directed by Engr-in-Charge. |
| 108 | Point wiring with 1.5 Sq.mmm copper conductor FRLS (multistranded) PVC insulated ISI marked unsheathed cable of any length drawn in and including concealed non metallic rigid PVC conduit of not less than 25mm dia ISI marked with all fitting and other accessories and also including PVC insulated ISI marked unsheathed FRLS cable size 1.5 sqmm copper conductor as earth wire to common earth dolly including galvanised terminal boxes ISI marked fixing into the wall of sizes as required at site and modular plates and frame suitable for fixing switches / sockets / fan regulators etc, and making good the disturbed surfaces matching to the existing surface for one light point/fan point/bell point controlled by one way modular switch 5 Amps 240 volts, complete all as specified and directed |
| 109 | One 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed by Engr-in-Charge. |
| 110 | All as per SI Item No. 115 here-in-before but wiring with 4 Sqmm for 15 Amps modular 3 pin socket outlet on independent board / two pin earth plug and socket including providing 4 Sq.mm PVC insulated multistranded unsheathed FRLS copper earth continuity conductor and connected to common earth dolly, complete all as specified and as directed by Engr-in-Charge. |
| 111 | Supply & Fixing Modular switch, one module, one way 6 Amp, 240V, complete all as specified and as directed by Engr-in-Charge. |
| 112 | Supply & Fixing Modular switch 16A, one way, one module, 240 Volts, complete all as specified and as directed by Engr-in-Charge. |
| 113 | Supply & Fixing modular socket one way 6 Amps, 2/3 pin combination 2 module, complete all as specified and as directed by Engr-in-Charge. |
| 114 | Supply & Fixing modular socket, 6A/16A - 2 /3 pin combination 2 module, complete all as specified and as directed by Engr-in-Charge. |
| 115 | S&F ceiling rose two to three terminal surface backallite type AC 50Hz 230 volts complete all as specified and as directed by Engr-in-Charge. |
| 116 | S&F 1x20W,230V, 6500K CCT surface mounted integral LED batten with extruded aluminium housing with inbuilt electronic driver, polycarbonate diffuser including connecting up with twin core twisted flexible copper condctor cable from ceiling rose to fitting complete all as specified and as directed by Engr-in-Charge. |
| 117 | Supply and fixing 240V, 10 KA 'c' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge. |
| 118 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 2 pole and 63 amps current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge. |
| 119 | Supply and fixing factory made epoxy powder coated Distribution Board SPN 04 way double door ( MCB DB ) MCB DP as In comer, with 200 Amp bus bar, metal door (IP-43 protection, IK-09)as per IES-61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete complete all as specified Note: MCBs will be measured and paid seperately under respective Sch A item in the schedule |
| 120 | Supplying and fixing 4mm 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specified and as directed by Engr-in-Charge. |
| 121 | M&L for Point wiring complete with and including 1.5 sq. mm (nominal area) single core multi stranded FRLS copper conductor PVC insulated unsheathed cable 1100 volts grade ISI marked drawn through in and including Wiring with Copper conductor cables in PVC casing & caping metalic rigid PVC conduit with accessories such as bend ,tees, junction boxes etc. suitable modular boxes for mounting fittings like modular switches, modular sockets and fan regulators etc with modular sheet covers including one run of 1.5 Sqmm PVC insulated and unsheathed multi strand FRLS copper conductor as green colour earth wire and connected to common earth dully complete all as specified and directed for the following:- |
| 122 | One light/fan/bell point controlled by one switch complete all as specified and as directed by Engr-in-Charge. |
| 123 | One 3 pin socket outlet 5A on independent board complete all as specified and as directed by Engr-in-Charge. |
| 124 | One 3 pin socket outlet 6 Amps on the same board with other switches. complete all as specified and as directed by Engr-in-Charge. |
| 125 | All as per item 123 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand ) copper conductor cable for 3/6 pin socket outlet 15 amp on one independent board complete all as specified and as directed by Engr-in-Charge. |
| 126 | S&F Modular Switch one way 6 Amps, 1 module all as specified and directed. |
| 127 | S&F Modular Socket 2 module for 2 / 3 pin 6 Amp all as specified and directed. |
| 128 | S&F Modular Switch one way 16 Amps, 1 module all as specified and directed. |
| 129 | S&F Socket 2 module 2in1, 3 pin, 6 and 16 Amp, complete all as specified and directed. |
| 130 | S&F ceiling rose PVC / polycorbonate isolated body 3 terminals with base plate ISI marked including taking down old unserviceable ceiling rose complete all as specified and directed. |
| 131 | S&F LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <=10W, luminaire lumen >2000 lm, system efficiency of > 100 lumens/W, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) including taking down old unserviceable light fitting of any description complete all as specified and directed.Make:- Wipro Model No. LL20-111-XXX-65-NE or Havells Cat Part No. ENDURALINEARNEOBU10WLED8765SPCWH / technocomercially equivalent model of Philips/Bajaj |
| 132 | Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm including cutting, drilling and making hole for provision of exhaust fan complete all as specified and as directed by Engr-in-Charge. |
| 133 | Supply and fix PVC air freshner 200 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm including cutting, drilling and making hole for provision of exhaust fan complete all as specified and as directed by Engr-in-Charge. |
| 134 | Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed. |
| 135 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed. |
| 136 | M&L for sub main wiring complete with 2 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 4 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as directed by Eng-in-charge |
| 137 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete all as specified and as directed by Engr-in-Charge. |
| 138 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required complete all as specified and as directed by Engr-in-Charge. |
| 139 | Supplying and fixing 6 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required complete all as specified and as directed by Engr-in-Charge. |
| 140 | Supply and Fix MCB DP 40 A, 240 V, 'C' curve complete all as specified and as directed by Engr-in-Charge. |
| 141 | Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-Charge. |
| 142 | M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 4 sqmm (nominal area) 1100 volts grade multistranded FRLS copper conductor with one run of 4 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 25mm outer dia complete and accessories of suitbale size as required. Note : Three run of 4 sqmm cable and one run of conduit shall be measured and paid as one length. |
| 143 | Supply and laying in walls, ceilings or laid in floors steel water tubing galvanised medium grade 25 mm dia and connection including fitting like Tee, Bend, Socket, Elbow, Short pieces connectors, plugs, and unions etc, cutting thread all as specified and directed. |
| 144 | Supply and fix 25 mm bore pipe gun metal gate valve (ISI) marked with iron wheel head screwed both ends for iron pipe suitable for following bore of pipe including taking down old existing gate valve complete all as speficied and directed. |
| 145 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC white recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-Charge. |
| 146 | Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 147 | S&F MCB SPN 63 Amps complete all as directed by Engr-in-charge. |
| 148 | S&F MCB SP 240 Volts 5 to 40 Amps complete all as specified and as directed by Engr-in-Charge. |
| 149 | M&L for sub main wiring complete with 4 runs of 6.0 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 2 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly complete all as directed by Eng-in-charge |
| 150 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender