Tender For special Repair To Bldg No T-92, T-261 At Drugmula And special Repair To Pathway At Zangli Under The Aor Of Ge 874 Ews.
Tender Value
45.87 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-92, T-261 At Drugmula And special Repair To Pathway At Zangli Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | S & F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S & F for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 5 | S&F Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap complete all as specified and directed. |
| 6 | M & L for 25mm thick 2nd class softwood boarding, planed one side, with butt joint fixed with nails in Fascia, eaves boarding complete all as specified |
| 7 | M&L for preparation of new surfaces and applying two coat of synthetic enamel paint on wooden surfaces over one Coat of primer of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 8 | Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed. |
| 9 | M & L second class soft wood in scantling clean swan complete all as specified and directed. |
| 10 | Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 11 | Taking down chowkat with shutters n. exc.1.5 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 12 | S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed. |
| 13 | S & F plain framed, panelled shutters 35 mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides of veneered particle board med density, wood particle board with commercial face fitted to chowkhat complete all as specified and directed. |
| 14 | S & F glazed & skeleton shutters 30 mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhats, but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed. |
| 15 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 16 | M&L plywood grade BWR type BB, 12 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. |
| 17 | M&L for 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface, complete all as specified and directed. Note: Frame work shall be measured and paid separately. |
| 18 | M & L for IInd class hard wood plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured nails complete all as specified and directed. |
| 19 | S&F For 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 20 | S&F for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long complete all as specified and directed. |
| 21 | All as per item no 20above but 150mm long. |
| 22 | S&F for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long complete all as specified and directed. |
| 23 | S&F for MS butt hinges med. Weight, cold rolled 100mm long complete all as specified and directed. |
| 24 | All as per item no 23 above but 75mm long complete all as specified and directed. |
| 25 | S&F for mild steel pressed handles, oval type, stove enamelled black of 100mm long. |
| 26 | All as per item no 25 above but 150 mm long. |
| 27 | Dismantling floor hearth or wall tilling including cement mortar bedding and rubbish of the premises complete all as specified and directed. |
| 28 | M&L for 75mm thick plain cement concrete 1:4;8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed |
| 29 | M & L for 25 mm thick plain cement concrete 1:2:4 type Bo (using 12.50 mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge. |
| 30 | Demolition of cement concrete (Un - reinforced) in ground floors and pavings n exc. 15cm thick (Below or above ground level) complete all as specified and directed. |
| 31 | M & L for heavy duty Vitrified Ceramic tiles 15 mm thick (square/ rectangular) Light shade polished, Light shade area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on 15mm thick screed bed in Cement Mortar 1:6 as specified |
| 32 | M & L for 75 mm thick cement concrete PCC 1:3:6 type C-1 (using 20 mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 33 | Demolition in Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 34 | M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 35 | M & L for 15mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement, including taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed. |
| 36 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed |
| 37 | S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 38 | M & L for 75 mm thick cement concrete PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 39 | M&L cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 200 mm complete all as specified and directed. |
| 40 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 41 | M&L for finishing surface of concrete roads, pavements, by belting complete all as specified and directed. |
| 42 | M&L Polythene film, black, 50micron laid in floors complete all as specified and directed. |
| 43 | M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 44 | M&L for excavating in post holes, soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick Complete all as specified and directed. |
| 45 | M&L for cement concrete 1:2:4 type D-2 using 40mm Graded aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 46 | M&L for cement concrete 1:4:8 type D-2 using 40mm Graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed |
| 47 | M&L for walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in Cm 1:4 complete all as specified and directed. |
| 48 | M&L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 49 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed. |
| 50 | M&L for providing precast cement concrete 1:3:6 type C-1 using 20mm graded aggregate as in bonders for stone walling and set in cement mortar 1:4 complete all as specified and directed. |
| 51 | M&L for 110mm Bore PVC pipes single socketed in any length with rubber ring joints fixed to walls concrete complete all as specified and directed. |
| 52 | M&L for Cement concrete 1:2:4 Type B1 (20mm Graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 53 | M&L for dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 54 | Material & Labour for providing and fixing stainless steel (Grade 304) railing, balusters, newel posts, made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 55 | M&L excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.in soft/Loose soil Complete all as specified and directed. |
| 56 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/Loose soil Complete all as specified and directed. |
| 57 | M&L for removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 58 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed. |
| 59 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed |
| 60 | M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification including taking down old one complete all as specified and directed. |
| 61 | All as per item No 60 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board, complete all as specified and directed. |
| 62 | All as per item No 60 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 63 | All as per item No 60 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board. |
| 64 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 65 | S & F switch socket combination 2 in 1, 5A, flush type , complete all as specified and directed by Engr-in-Charge. |
| 66 | S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fixing with replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete, complete all as specified and directed. |
| 68 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 69 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 70 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 71 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 72 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 73 | M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion with earth work complete all as specified and directed. |
| 74 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/ accessories etc complete all as specified and directed. |
| 75 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 76 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 77 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 78 | M&L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire, complete all as specified and directed. |
| 79 | Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz, Refrigerant type R134a, complete all as specified and as directed. |
| 80 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender