Tender For Provn Of Additional Officer Room Near Staircase In Bldg No 12 Bmh Line Of Hq Pupsa Under Age B/R-Ii And Age E/M-I Of Ge (North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Sep 2026
21 days left
EMD
6960
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Additional Officer Room Near Staircase In Bldg No 12 Bmh Line Of Hq Pupsa Under Age B/R-Ii And Age E/M-I Of Ge (North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes and disposal of debirs out side of MoD land complete all as specified and directed. |
| 2 | M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M&L for providing reinforced cement concerete nominal mix Type B1 1:2:4 in (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating, as directed |
| 4 | M&L for providing reinforced cement concerete nominal mix Type B1 1:2:4 in (20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.complete all as specified and directed. |
| 5 | S&F mild steel TMT bars No 500D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. |
| 6 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 7 | M&L cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 8 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors andbeams, etc. for rough finished surface of concerete complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | S&F for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 12 | S&F of Welded steel wire fabric weight not exc 4 kg per Sqm supplied and fixed complete to wood or steel members complete all as specirfied and directed. |
| 13 | S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars,aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with clips,frame,necessary joining cleats,glazing clips,neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges,handles and tower bolts including locking arrangements including powder coated anodised aluminium frame,grill with one or more rebates incl S&F 5.50 mm thick black glass complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F 25 mm dia stainless steel curtain rod with fancy type bracket and ring ( 08 Nos/ RM) complete all as specified and as directed. |
| 15 | S&F for Framed brackets/ steel grid frame work of size (1200x1200mm) for false ceiling of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. and welded to truss or fixed to wall complete all as specified and directed. |
| 16 | S&F Mild steel, 1mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 17 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hanging with 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 18 | S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional complete all as specified and directed |
| 19 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring all as specified |
| 20 | S&F Virified Ceramic tiles double charge superior quality dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick adheaive bedding layer for laying floor finishes complete all as specified and directed. |
| 21 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like vertical surfaces in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including 15 mm thick screed in CM 1:4 for receiving Granite work complete all as specified and directed. |
| 22 | Rounding to edges of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 23 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of wall care putty exterior grade over new surfaces including 2mm thick wall care putty complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor. |
| 24 | Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including 2mm thick wall care putty exterior grade over old surfaces complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor. |
| 25 | M&L for preparation of newly steel and iron surface exceedding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zink chrome primer complete all as specified and directed. |
| 26 | Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for the followings :- (a) One tube light/Bulb/ ceiling fan/ exhaust fan/ security light point controlled by one, one way switch 05 / 06 Amps. |
| 27 | All as described item ser No 1 here-in before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 28 | All as described item ser No 1 here-in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 29 | S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked and as specified. |
| 30 | S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 31 | S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked and as specified. |
| 32 | S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked and as specified. |
| 33 | Supply & fix in repair recess mounting high lumen LED flat panel 2'X2' 36Watt, white powder coated CRCA housing with high power LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip ,connector block etc. and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed. |
| 34 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/ distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed . |
| 35 | Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA. complete all as specified and directed. |
| 36 | S&F in repair MCB SPN 40 Amps, AC, 240V, 10KA, ISI Marked 'C' curve incl thimble etc complete all as specified and directed. |
| 37 | M & L for sub main wiring with two single core 2.5Sqmm nominal area with 1100 Volt grade, conforming to IS 694 (2010) PVC insulated, unsheathed, with one runof 2.5 sqmm multi stranded copper conductor cable (FRLSH) ISI marked for continous earth wire drwan in and including concealed rigid non-metallic PVC conduit (ISI Marked) of size 19/20 mm dia medium grade with fitting (ISI) marked including cutting , chasing for conduit and making good ofvwalls etc |
| 38 | Single pole and neutral enclosure with two pin and earth plug and socket complete with 20 Amp MCB,comlete all as specified and as directed. |
| 39 | Labour for shifting of split AC 1.5/2 ton capacitor one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on site requirement.. Material and labour for 100 mm thick plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender