Tender For Provn Of Sentry Posts, Retaining Wall Drainage System At Kg Top Under Ge 881 Ews
Tender Value
2.22 Crore
Estimated cost
Bid Submission
07 Oct 2026
35 days left
EMD
2.97 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Sentry Posts, Retaining Wall Drainage System At Kg Top Under Ge 881 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 2 | Construction of building block of Sentry Post, complete all as shown on drawings and as specified. |
| 3 | Total Amount of Sch 'A' Part - II (Site Clearance and Development Work) |
| 4 | Total Amount of Sch 'A' Part - III (Sec-I) (Internal Electric Supply Work) |
| 5 | Total Amount of Sch 'A' Part - IV (Area Drainage Work) |
| 6 | Total Amount of Sch 'A' Part -V (Sec-I) (Protective Work) |
| 7 | Total Amount of Sch 'A' Part -VI (Road, Path and Culvert Work) |
| 8 | Total Amount of Sch 'A' Part -VII (External Electric Supply Work) |
| 9 | Sch 'A' Part-III (Sec-II) (Internal Electric Supply Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 10 | Point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20mm dia medium grade (MMS) and all accessories are concealed in walls / roofs / floors / ceiling etc; including modular metal flush box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick including modular top cover plate as per numbers of switch modules for fixing of modular switches, sockets, fan regulators, red colour indicator, blank plates etc. as approved colours and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed (Green colour), single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- Note No1: All necessary accessories such as modular steel box, top cover plate, blank plate, screws, washers and all modular electrical fixtures are to be used of same make/brand only. Note No 2: Any cutting /leaving /forming holes, chases etc., in walls, floors and ceiling as required and making good the same, shall be deemded to be included in lump sum Sch 'A' Part-I as per para 10(b) in Sch 'A' BOQ Notes. |
| 11 | All as per Srl item No. 8.01 but one light point/fan point controlled by one switch |
| 12 | All as per Srl item No. 8.01 but one 5 pin socket outlet, 6 Amps, on independent board |
| 13 | All as per Srl item No. 8.01 but one 5 pin socket outlet, 5 Amp on same board |
| 14 | All as per Srl item No. 8.01 but with 2.5 sqmm size cable as phase and neutral and one 2.5 Sqmm size cable as earth continuity conductor for one 15/20 Amps socket outlet independent board. |
| 15 | Ceiling fan complete with blades, down rods modular fan step regulator, 120W, 2 module and accessories, 230V, 600mm sweep, min air delivery 245CFM, with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 16 | Supply and fixing LED building security light fitting 35 Watt, 230V, AC, outdoor type, IP-65/66 with pressure die cast aluminum housing and heat resistant complete with driver, lumen efficiancy not less than 110 Lm/watt with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed. |
| 17 | Street light bracket made out of 40mm dia, medium grade GI pipe of 1.5m length, both end hole for fixing street light/security light fitting on Steel tubular pole including MS clamps, back plates fabricated from structural steel section 50mmx6m, including nuts, bolts, washers, welding cold or hot, drilling of holes for bolts, in any shape or size including two coats of aluminium paint over a coat of red oxide primer after preperation of steel surfaces, complete all as specified and directed. |
| 18 | LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down unserviceable tube light fittings, complete all as specified and directed. |
| 19 | LED lamp, CDL, 9/10 watt, B22 base complete all as specified and as directed. |
| 20 | Sch 'A' Part-V (Sec-II) (Protective Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 21 | Boulder/Gravel filling dry, hand packed tightly as in inverted filter in back side of retaining wall in two layers vertically, 1st layer 300mm thick with 40mm to 100mm size gravel and 2nd layer 150mm thick with 20mm to 40mm size gravel complete all as specified and shown on drawings. |
| 22 | Coarse sand as in inverted filter back side of retaining wall, complete all as specified and directed. |
| 23 | 20mm thick, pre- moulded bitumen impregnated fibre board in expansion joint including cutting to shape fixing in position with adhesive/cement and finishing the surface complete all as spedified and directed. |
| 24 | Sch 'A' Part-VII (Sec-II) (External Electric Supply Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 25 | Double walled corrugated (DWC HDPE) pipe of size 50mm including snap fit coupler conforming to IS14930 (Pt-II)/IS 16205 Pt-II for protection of under ground cable complete all as specified and directed. |
| 26 | Sch 'A' Part - VIII (Misc Items of work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as \\"Rs. 0.00\\" under col.5 signifies this fact only. |
| 27 | Earthing complete with galvanized steel pipe electrode 40mm bore, medium grade, 2.5m length buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including medium grade GI protection pipe 15mm bore up to 7.5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal of soil to a distance not exc. 50m, testing on completion complete all as specified and directed. (Contd.../) |
| 28 | Note: (i) On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction.(ii) Supply and fix of the earth Pit chamber board for all earthing fixe in this project of 3.15mm thick mild steel sheet of size min 45cm x 30cm fixed with 12mm thick MS rod two Nos up to 90cm height by nut/bolts including spray painting with two coats of synthetic enamel black paint complete MS sheet both side including writing letters min 6cm height i.e; earth Pit No. location, earthinc test value and date and other letters complete all as specified and directed by Engr- in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 35 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 37 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender