Tender For Repair/ Maintenance Of Wooden Furniture And Painting/ Polishing Of Wooden Furniture Other Misc Work At Af Stn Amritsar
Tender Value
7.99 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
19 days left
EMD
15980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Wooden Furniture And Painting/ Polishing Of Wooden Furniture Other Misc Work At Af Stn Amritsar
BOQ
| Sl. No. | Item Description |
| 1 | WOODEN FURNITUTRE |
| 2 | Chair dining |
| 3 | M & L for removing unserviceable/ broken Rear leg from chair dining (FD-1105/279) and supply and fix new rear leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 4 | M & L for removing unserviceable/ broken Front leg from chair dining (FD-1105/279) and supply and fix new front leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 5 | M & L for removing unserviceable/ broken Rear/front/side rail from chair dining (FD-1105/279) and supply and fix new Rear/front/side rail as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 6 | M & L for removing unserviceable/ broken Stiffener from chair dining (FD-1105/279) and supply and fix new Stiffener as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 7 | M & L for removing unserviceable/ broken Back rest from chair dining (FD-1105/279) and supply and fix new Back rest as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 8 | Removing the existing cane from chair dining (FD-1105/279) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed and shown on drawings. |
| 9 | M&L for preparation of sufaces by throughly rubbing with emery paper, applying raw seina/burnt seina uniformly from chair dining (FD-1105/279) and polishing with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 10 | Chair writing |
| 11 | M & L for removing unserviceable/ broken Rear leg from chair writing (FD-202/250/280) and supply and fix new rear leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 12 | M & L for removing unserviceable/ broken Front leg from chair writing (FD-202/250/280) and supply and fix new front leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 13 | M & L for removing unserviceable/ broken Rear/front/Side rail from chair writing (FD-202/250/280) and supply and fix new Rear/front/Side rail as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 14 | M & L for removing unserviceable/ broken arms from chair writing (FD-202/250/280) and supply and fix new arms as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 15 | M & L for removing unserviceable/ broken Back rest from chair writing (FD-202/250/280) and supply and fix new Back rest as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 16 | M & L for removing unserviceable/ broken Stiffener from chair writing (FD-202/250/280) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings. |
| 17 | Removing the existing cane from seat & back of the chair from chair writing (FD-202/250/280) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. |
| 18 | M&L for preparation of sufaces by throughly rubbing with emery paper, applying raw seina/burnt seina uniformly from chair writing (FD-202/250/280) and polishing with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 19 | Sofa set 4/5 seater & Sofa chair With cushion |
| 20 | M&L for removing the old worn/torn out cushion from sofa set 4/5 seater FD-281,Fd-1113 and tapesty cloth from seat and back of sofa and providing new cushion of 40 density cool foam of size 560 x 530x100 mm thick including provision of leave marlindable 30,000 RUBS tapesty cloth of approved shade & quality (Tapestry cloth ) all over a cover of lining cloth duly covered and stiched over the cushions complete all as specified and shown on drawings.Make : sleepwell/kurlon. |
| 21 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the sofa set 3/4/5 seater all as specified and shown on drawing FD-281. |
| 22 | Side Board |
| 23 | Removing the existing unserviceable door shutters (both) of side board (FD-241/1112/372) and supply and fix new door shutters (both) as to match with the existing, made of 18mm thick teak face Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading all round including all fittings and fixtures all as shown on drawing and as directed Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size and quality) (b) Hinges shall be 50mm of approved quality. |
| 24 | Removing the existing unserviceable front portion of the drawer of side board (FD-241/1112/372) and supply and fix new front portion of the drawer as to match with the existing made out of 18mm thick teak face Pre-laminated particle board with laminated finish including new knob all as specified and shown on drawing. |
| 25 | Removing the exisiting unserviceable top from the side board (FD-241/1112/372) and supply and fix new top as to match with the existing, made out of 18mm thick teak face Pre-laminated praticle board with laminated finish duly providing 4mm thick teak wood beading all round duly french polish all as specified and as shown on drawing. |
| 26 | Removing the existing unserviceable plywood from sides (both) of side board (FD-241/1112/372) supply and fix new 3.5mm thick one side teak face plywood on sides (both) as to match with the existing all as specified and shown on drawing |
| 27 | Removing the existing unserviceable back of side board (FD-241/1112/372) and supply and fix new back as to match with the existing , made out of 6mm thick commercial ply wood all as specified and shown on drawing |
| 28 | Polishing outersides of the side board from top (FD-372) and foot board including legs and long rails of the with french polish obtaining a glossy finish after preparation of the outer surfaces by throughly rubbing with emery paper all as specified. |
| 29 | Table Dining 04 Person |
| 30 | Removing the existing unserviceable leg from the Table dining for 04 persons and supply and fix new leg made of shisham wood to match with the existing all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 31 | Removing the existing unserviceable top rail (long/front) from Table dining for 04 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 32 | Removing the existing unserviceable top rail (short/side) Table dining for 04 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawingFD-273 & FD/MAP-II/03. |
| 33 | Removing the existing unserviceable top from the Table dining for 04 person and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particles board one side laminated with 4mm thick teak wood beading duly french polish all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 34 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Table dining for 04x06 person all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 35 | Table Dining 06 Person |
| 36 | Removing the existing unserviceable leg from the Table dining for 06 persons and supply and fix new leg made of shisham wood to match with the existing complete all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 37 | Removing the existing unserviceable top rail (long/front) from Table dining for 06 person and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shown on drawings FD-273 & FD/MAP-II/03 |
| 38 | Removing the existing unserviceable top rail (short/side) Table dining for 06 person and supply and fix new rail made of shisham wood to match with the existing all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 39 | Removing the existing unserviceable top from the Table dining for 06 person and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particles board one side laminated with 4mm thick teak wood beading duly french polish complete all as specified and shown on drawings FD-273 & FD/MAP-II/03. |
| 40 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Table dining for 04x06 person all as specified and shown on drawing FD-273 & FD/MAP-II/03. |
| 41 | Teapoy |
| 42 | Removing the existing unserviceable leg from the Teapoy and supply and fix new leg made of shisham wood to match with the existing complete all as specified and shown on drawings FD-382/232 & 278. |
| 43 | Removing the existing unserviceable top rail (long/front) from Teapoy and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shwon on drawing FD-382/232 & 278. |
| 44 | Removing the existing unserviceable top rail (short/side) from Teapoy and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shown on drawing FD-382/232 & 278. |
| 45 | Removing the existing unserviceable top from the Teapoy and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish complete and toughened glass 10mm thick top (Mk - Atul/Gobain) all as specified and shown on drawing FD-382/232 & 278. |
| 46 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Teapoy all as specified and shown on drawing FD-382/232 & 278. |
| 47 | Table peg |
| 48 | Removing the existing unserviceable leg from the Table peg and supply and fix new leg made of shisham wood to match with the existing complete all as specified and shown on drawing FD-277 &236/384. |
| 49 | Removing the existing unserviceable top rail (short/side) from the Table peg and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shown on drawing FD-277 &236/384. |
| 50 | Removing the existing unserviceable top rail (long/front) from Table peg and supply and fix new rail made of shisham wood to match with the existing all as specified and shwon on drawing FD-277 &236/384. |
| 51 | Removing the existing unserviceable top from the Table peg and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated particle board with 4mm thick teak wood beading duly french polish complete all as specified and shown on drawing FD-277 &236/384. |
| 52 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax for the Table peg all as specified and shown on drawing FD-277 &236/384. |
| 53 | Table writing |
| 54 | Removing existing unserviceable top of the table writing (FD-249 & 275) and supply and fix new top as to match with existing made out of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teak wood beading all around duly french polish complete all as specified and shown of drawing |
| 55 | Removing the existing unserviceable leg of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawings. |
| 56 | Removing the existing unserviceable leg (short) of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing |
| 57 | Removing the existing unserviceable side/bottom rail of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified and shown on drawing |
| 58 | Removing the existing unserviceable back of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of 6mm thick plywood commercial complete all as specified and shown on drawings. |
| 59 | Removing the existing unserviceable side of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish complete all as specified and shown on drawings. |
| 60 | Removing the existing unserviceble stiffner of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of shisham wood complete all as specified shown on drawings. |
| 61 | Removing the existing unserviceable drawer of the table writing (FD-249 & 275) and supply and fix the same with new one as to match with existing made out of 18mm thick partical board one side laminated finish including provision of knob compete all as specified and shown on drawing.Note:- Knob shall be aluminium anodised (Dark Brown) chromium plated of approvd size and quality. |
| 62 | Removing the existing unserviceable cupboard/cabinate complete of the table writing (FD-249 & 275) and supply and fix new cupboard complete made out of 18mm thick partical board one side teak face finish including 4mm teak wood beading on front side including fitting/fixtures complete all as specified and shwon on drawing. Note:- (a) Knob shall be aluminum anodized (dark brown chromium plated of approved size and quality).(b) Hinges shall be 50 mm of approved quality. |
| 63 | Material and labour for preparation of wooden surfaces with sand/emery paper and applying french polish of approved quality to achieve unifrom smooth texture and high glossy finish after filling holes with beas wax for table writing all as specified and shown on drawing (FD-249 & 275) |
| 64 | Dressing Table Gents/Ladies with mirror |
| 65 | M & L for removing the existing unseviceable looking mirror from Dressing Table Gents/Ladies (FD-230/251), supply and fix new looking mirror of 5.5 mm thick of appropriate size along with wooden frame all around the Mirrow 6mm thick commercial plywood back of the mirror and Teak beading all around including minor repairs complete all as specified and shown on drawings.Note : Make of Mirror should be of Modiguard/St Gobain/Atul. |
| 66 | M&L for removing the unserviceable Box alongwith drawers from Dressing Table (FD-230/251) and supply and fixing new box and drawers made out of 18 mm thick pre laminated particle for box/drawers and 6.0 mm thick commercial plywood at bottom complete as specified and shown on drawings. |
| 67 | Polishing outersides of the Dressing table from (FD-230/251) with french polish obtaining a glossy finish after preparation of the outer surfaces by throughly rubbing with emery paper all as specified. |
| 68 | CHAIR EASY :- |
| 69 | M & L for removing unserviceable/ broken Rear leg from chair easy (FD-1108/229) and supply and fix new rear leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 70 | M & L for removing unserviceable/ broken Front leg from chair easy (FD-1108/229) and supply and fix new front leg as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 71 | M & L for removing unserviceable/ broken arms from chair easy (FD-1108/229) and supply and fix new arms as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 72 | M & L for removing unserviceable/ broken front/back/Side rail of seat & back from chair easy (FD-1108/229) and supply and fix new front/back/Side rail as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 73 | Removing the existing cane from seat & back of the chair from chair easy (FD-1108/229) and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders all as directed. |
| 74 | M & L for removing unserviceable/ broken Back rest from chair easy (FD-1108/229) and supply and fix new Back rest as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 75 | M & L for removing unserviceable/ broken Stiffener from chair easy (FD-1108/229) and supply and fix new Stiffener as to match with the existing, made of shisham wood all as specified and shown on drawings. |
| 76 | M&L for preparation of sufaces by throughly rubbing with emery paper, applying raw seina/burnt seina uniformly from chair easy (FD-250/280) and polishing with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified. |
| 77 | Table centre |
| 78 | Removing the existing unserviceable leg from the Table centre and supply and fix new leg made of shisham wood to match with the existing complete all as specified and shown on drawing FD-274 &235. |
| 79 | Removing the existing unserviceable top rail (long/side) from the Table centre and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shown on drawing FD-274 &235.. |
| 80 | Removing the existing unserviceable top rail (short/side) from the Table centre and supply and fix new rail made of shisham wood to match with the existing complete all as specified and shown on drawing FD-274 &235.. |
| 81 | Removing the existing unserviceable top from the Table centre and supply and fix new one as to match with the existing made of 18mm thick teak face pre-laminated particle board one side laminated with 4mm thick teak wood beading duly french polish complete and toughened glass 10mm thick top (Mk - Atul/Gobain) all as specified and shown on drawing FD-274 &235. |
| 82 | Bed Hard Wooden |
| 83 | M & L for removing unserviceable head board from Bed Hard (FD-245/246) and supply and fix new head board comprising of outer member made of shisham wood and interial frame made of cheer woodcovered both sides of head board with 3.5 mm thick OST plywood and also to provide 12 mm thick half cut leak wood beading complete all as specified and shown on drawings. |
| 84 | M & L for removing unserviceable foot board from Bed Hard (FD-245/246) and supply and fix new foot board comprising of outer member made of shisham wood and interial frame made of cheer woodcovered both sides of hea board with 3.5 mm thick OST plywood and also to provide 12 mm thick half cut leak wood beading complete all as specified and shown on drawings. |
| 85 | M & L for removing unserviceable long Rail of Bed Hard and S&F new long rail made out of shisham teak wood duly finished complete all as specified and shown on drawings. |
| 86 | M & L for removing unserviceable/ broken Stiffener from Bed Hard (FD-245/246) and supply and fix new Stiffener as to match with the existing, made of shisham wood complete all as specified and shown on drawings. |
| 87 | M & L for removing unserviceable ply wood from top of the bed from Bed Hard S&F new plywood 12mm thick BWR phenel borded commercial plywoodwith suitable screws complete all as specified and shown on drawings (FD-245/246) (Make : KITPLY/GREENPLY/CENTURY ) ISI Marked. |
| 88 | Removing unserviceable foot rest portion of Bed Hard and S & F new foot rest 3.5/4mm thick one side teak faced and other side commercial BWR ply wood alongwith replacement of unserviceable wooden legs with well seasoned 1st class teak wood and providing readymade 30x4mm teak wood beading complete all as per DRG (FD-246) duly finished with french polish to all wooden surface expost to view complete all as per specified and directed by Engr-in-charge |
| 89 | Hat Stand W/Mirror |
| 90 | M&L for removing the existing unserviceable looking mirror from Hat Stand (FD-233) and Supply and Fix the new looking mirror og 5.5 mm thick of appropriate size alongwith 4mm thick commercial plywood back of the mirror including mirror repairs complete all as specified and shown on drawings. Note :- Make of Mirror should be of Modiguard/Saint gobain/ Atul. |
| 91 | Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender