Tender For Misc Repair To Security Wall, Gate, Fencing, Path, Hard Standing Etc To Residential Area Zone A At Kwc Under Ge (I) R&D Delhi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
21 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc Repair To Security Wall, Gate, Fencing, Path, Hard Standing Etc To Residential Area Zone A At Kwc Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches, pillers etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed |
| 2 | Taking down cement plaster/grit plaster/rough cast plaster on brick or stone walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed |
| 3 | Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floor and paving not exceeding 15 CM thick (below or above ground level) all as specified and directed |
| 5 | Taking down barded wire including concertina coil complete all as specified and directed |
| 6 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 7 | Dismantling of floor tiles/ hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises out side MoD land complete all as specified and directed. |
| 8 | M&L for brick work straight or curved on plan exceeding 6m mean radius in CM (1:6) with Sub class ‘B’ brick complete all as specified and as directed. |
| 9 | Description all as per item No. 08 here-in-before but except bricks. |
| 10 | M&L for 15mm thick cement plaster on brick/concrete surface in CM 1:4 finished even and smooth surface without using extra cement complete all as specified and directed. |
| 11 | M&L rendering 5mm thick in CM 1:3 on fair faces of brick or concrete surfaces of ceiling, facia/soffits of slabs etc to be finished even and smooth (w/o using extra cement) including setting coat complete all as specified and directed. |
| 12 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose complete soil all as specified. |
| 13 | Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3.0m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil all as specified. |
| 14 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate. |
| 15 | Reinforced cement concrete (M-25) 20mm grade aggregates, design mix) in: Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete. |
| 16 | Reinforced cement concrete (M-25) 20mm grade aggregates, design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span. |
| 17 | Reinforced cement concrete (M-25) 20mm grade aggregates, design mix) in Columns, pillars, piers, posts and struts. |
| 18 | Reinforced cement concrete (M-25) 20mm grade aggregates, design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 19 | M&L Mild steel bars 10mm diameter and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm diameter or securing with clips Fe-410-W (Grade E-5 quality-A or Fe 290 (Grade - E-165) |
| 20 | Description all as per item No. 19 here-in-before but 6mm to 8mm diameter. |
| 21 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surface of concrete complete all as specified. |
| 22 | M&L Formwork to floor or roof beams, beam haunches, girders, bressummers,lintels, cantilevers, shelves including support- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete. |
| 23 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished flat surface of concrete. |
| 24 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) rough finished flat surface of concrete. |
| 25 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. |
| 26 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm with soft/loose soil all as specified. |
| 27 | S&F (Ornamental gate) Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-1657 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. ornamental and intricate design. |
| 28 | Providing and laying at or near ground floor factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage ,opening wherever required including taking out old kerb stone and removing from MoD land complete all as specified and directed. |
| 29 | M&L for PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping, bed plate including water through and the like weathering, slightly rounded or chamfered angles and throating complete including formwork complete all as specified and directed. |
| 30 | M&L for PCC 75mm thick (1:3:6), type C2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base of floor complete all as specified and directed. |
| 31 | M&L Prepolished coloured chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors using with grey cement and pigment, over 20mm thick screed bed in cm 1:6, including taking out of old chequered tiles complete all as specified and directed. |
| 32 | M&L for Providing and laying 60 mm thick factory made chamfered edges prepolished coloured cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, park, lawns or light traffic parking etc of required strength , thickness, size shape made by table vibrating method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking paver block in sand bedding layer through vibrating compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand with and including taking out of old paver block complete all as specified and directed. |
| 33 | M&L for Providing and laying 80 mm thick factory made chamfered edges prepolished coloured cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, park, lawns or light traffic parking etc of required strength , thickness, size shape made by table vibrating method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking paver block in sand bedding layer through vibrating compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand with and including taking out of old paver block complete all as specified and directed. |
| 34 | S&F 2 strand, steel barbed wire 2.24 mm diameter barbed with 2mm diameter barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed. |
| 35 | S&F in repair for concertina coil reinforced punched (chrome razor of blade wire) with barbed tape of 0.5mm thick galvanized steel sheet and core wire of diameter 2.5mm high tensile steel wire of concertina coil fencing with punched tape, 750mm diameter, having 50 Nos rounds per 6m length, all as specified and directed (linear horizontal length to be measured) |
| 36 | S&F MS angle iron in fencing posts & struts including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary, drilling, bolting or riveting etc and similar work conforming to Fe-410 or Fe 310-0 |
| 37 | S&F designer tiles (stone series) of size 600mmx300mmx7-8 mm thick on external faces of wall surfaces over and including cement mortar bedding 15 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 38 | M&L for 18 to 20mm thick granite stone slab on vertical surfaces such as skirting/dado etc set and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone and beveling half round edges of stones fixed over and including rendering 10 mm thick CM (1:3 ) etc complete all as specified and directed. |
| 39 | S&F in repair Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed. |
| 40 | Desilting and cleaning of open/covered drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge outside MoD land in sealed container etc complete all as specified and directed Please Enable Macros to View BoQ information |
| 41 | Desilting and cleaning of open/covered drains of any section manually including desilting soild/semi solid materials of any type vegetation growth and removal of sludge outside MoD land in sealed container etc complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender