Tender For special Repair Of Bldg No P-38 At Paleram Enclave And Provn Of Utensil Washing Point Near Bldg P-208 (Cook House) At 48 Fd Wksp Coy At Nams
Tender Value
32.77 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
65558
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-38 At Paleram Enclave And Provn Of Utensil Washing Point Near Bldg P-208 (Cook House) At 48 Fd Wksp Coy At Nams
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) n.exc 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each complete all as specified and directed. |
| 3 | S&F mild steel framed work just as doors, ventilators, and as in hold fast, ladders, Framed Guard bar etc with ends of bars shouldered and/or riveted complete welded hinged and similar work Conforming to Fe-290 Gde-E-165 including PCC 1:2:4 filling for hold fast and back filling in chowkat etc complete all as specified and directed. |
| 4 | M&L for mild steel work as in railing tubular section or other section for railings and similar work etc complete all as specified and directed. |
| 5 | Material and labour for 30 mm thick factory made solid PVC (Wood plastic composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with 15 x 15 Square tubes in is rails with screwing 8 x 28 mm heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufactures instructions complete all as specified and directed. |
| 6 | Material and labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless steel butt hinges shall be paid separately. |
| 7 | Material and labour for Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. Make : Rajshree or Ecocell equivalent |
| 8 | All as per item No above but of frame size 65 x 125 mm including all fittings making good after complete all as speicifed and directed.Make : Rajshree or Ecocell equivalent |
| 9 | Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf(g) 12 mm square guard bar, 10 cm centre to centre.(h) 25x4 mm flat iron all around for joint of both frame.Note: (I) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & Finishing around disturbed required surface with plaster in CM 1:4 and match with existing finishing.complete all as specified and directed by Engineer-in-charge. |
| 10 | Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified.(a)12mm Sq Guard bar 10Cm C/C Note:(i) Including taking down old steel window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing(ii) Wire cloth,Glass and Enamel Paint to measured separately in different item complete all as specified and directed by Engineer-in-charge. |
| 11 | Supplying and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed in squares not exc 0.50 Sqm in each panes complete all as specified and directed. . |
| 12 | Supply and fixing 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane complete all as specified and dircted. |
| 13 | Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed. |
| 14 | S&F floor door stopper of aluminium alloy body and tongued,anodised,with hard drawn steel spring,fixed 140mm min length complete all as specified and directed. |
| 15 | S & F 150mm aluminum handles, cast type, anodised etc complete all as specified and directed. |
| 16 | S & F 150 mm aluminum anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed. |
| 17 | S & F butt hinges 100 mm size medium weight cold rolled mild steel(zinc chromate coating)complete all as specified and directed. |
| 18 | S&F 250mm sliding door bolts aluminium alloy anodised, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 19 | Supply and fix mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 20 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth over one coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete all as specified and directed. |
| 21 | Supply and fix in repair, 20 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. |
| 22 | S&F in repair 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed complete all as specified and directed. |
| 23 | Supplying and fixing in repairs PVC valve less syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, handle type including 32mm dia of PVC(Heavy duty) flush pipe including brackets complete all as specified and directed. |
| 24 | Supply and fxing in replacement of rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and brass ball valve 20mm, high pressure with polyethelyne float and fly nuts (including old water storage tank) complete all as specified and directed.(including dismantaling of old water storage tank) |
| 25 | Supply and fix in repair, glass shelf with CP brackets and with decorative railing fixed to wall complete all as specified and directed. |
| 26 | S&F in repair glossy finish towel rail,20mm dia,D-type 60 cm long between flanges all as specified and directed. |
| 27 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 28 | M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exc. 6 mean radius in CM 1:6 complete all as spcified and directed. |
| 29 | All as per Srl Item 28.00 above but except brick. complete all as specified and directed. |
| 30 | S & F in repair 600mm x 450mm beveled edge mirror of the selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and directed. |
| 31 | Supply & fix in repair, Viterous China wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device complete all as specified and directed. |
| 32 | Supply and fixing in repair vitreous china wash hand basin(white) wall hung corner type of size 400 x 400 mm including bracket, CP waste coupling 32mm, waste pipe, chain, plug and porcelein stopper complete all as specified and directed. |
| 33 | S & F sink in repair made of stainless steel 1mm thick with plug washer and waste coupling, waste pipe including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowel size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 34 | S&F in repair stainless steel plate Rack of size 750x750x250mm weight not less than 7.5 kg with folded edge gloss finish complete all as specified and directed. |
| 35 | Taking down G.I tubing 15mm bore including connections complete all as specified and directed by Engr-In-Charge. |
| 36 | All as per ser item no-35.00 above but 20mm bore. complete all as specified and directed. |
| 37 | S&F 15mm bore G.I tube medium grade fixed to wall or under floor complete including cutting chases and make good in CM 1:3 complete all as specified. |
| 38 | All as per ser item no-37.00 above but 20mm bore. complete all as specified and directed. |
| 39 | M&L for PVC connection 45cm long superior quality with PTMT nut on both side . complete all as specified and directed. |
| 40 | Supply and fixing bib tap long body fancy type 15mm dia chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down old PVC tap complete all as specified and directed by Engr-In-Charge. |
| 41 | S&F 15mm bore stop cock concealed as in repair long shank chromium plated fancy type screwed down high pressure with crutch or butter fly handle. complete all as specified and directed. |
| 42 | S&F Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete including taking down old PVC angle cock complete all as specified and directed. |
| 43 | S & F Pillar cock SWAN NECK, fancy type cast copper alongwith capstan heads, chromium plated, screwed down high pressure , with or without lettred ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe size 15mm including taking down old PVC pillar tap complete all as specified and directed. |
| 44 | Supply and fixing 125mm dia , Brass chromium plated , shower rose with swivel joint fixed to GI pipe, complete including taking down old PVC shpwer rose all as specified and directed. |
| 45 | Taking down cement plaster from walls/ceiling including raking out joints hacking for key scrubbing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed. |
| 46 | M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 47 | M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement including mixing of WPC @3% by weight of cement complete all as specified and directed.Note:- WPC shall be paid under separate item. |
| 48 | M& L for 10mm rendering in cm (1:3) on ceiling surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 49 | Material and labour for applying finishing walls with Acrylic smooth exterior paint of required shade : New surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and as directed. |
| 50 | Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer of chalk whitening on walls complete over 1mm thick wall care putty complete all as specified and directed. |
| 51 | Material and Labour for removal of existing treatment by wire brushing and washing, rubbing down and stopping of surfaces and applying two coats of oil bound distemper over applying 1mm thick birla wall care putty on walls complete all as specified and directed. |
| 52 | M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed. |
| 53 | Material and labour for Prepration of old surfaces of walls, pillars, cornices etc. including scrapping down smoke, soot, and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes, cracks etc. on plastered or unplastered surfaces and applying Finishing walls with Acrylic Smooth exterior paint of required shade : Old surface work (Two coats applied @ 1.67 Ltr/10 Sqm each coat) complete all as specified and directed. |
| 54 | Material and Labour for preparation of old decorated plastered surfaces and applying one coats of white wash on ceiling complete all as specified. |
| 55 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 56 | Material and labour for 7 to 8 mm thick Non-skid ceramic tiles in floors, exc. 0.18 Sqm but not exc. 0.38 Sqm set & jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 57 | Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm, as in skirting,dado in vertical surfaces etc. and including 10 mm thick cement plaster 1:3 etc complete all as specified and directed. |
| 58 | Material and labour for Non-Skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (in patches to match the existing colour /shed) over and including screed bed 15 mm thick rendering in CM 1:6 complete all as specified and directed. |
| 59 | Material and labour for glazed ceramic coloured tiles of size 450 mm x 300 mm x 7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10 mm thick in cement mortar (1:3), etc. complete all as specified and directed. |
| 60 | M&L 18 to 20mm thick for machine cut green marble over riser,steps of stairs and skirting stone grinded & polished top of stone to achieve granite mirror finish including rounding edges and nosing including dismantling/roughening of existing old stone complete all as specified. |
| 61 | M&L 16 to 18 mm thick granite slab as in cooking platform and shelves machine cut flooring,skirting,riser etc incl 15mm thick cement mortar 1:4 set and jointed in neat cement slurry and pointed with coloured cement mixed with pigment to match the shade of slab incl cutting rubbing and polishing incl nosing to the edge of granite stone slab including dismantling/roughening of surface complete all as specified and directed. |
| 62 | M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in cover slabs (for manhole etc),water tank base and similar work complete all as specified and directed including demolition of existing RCC. |
| 63 | M&L for RCC (1:2:4) type B-0 using 12.5mm graded aggregate as in slabs supported on walls,beams and columns in floors,roofs,landings,deck slabs,balconies and in shelves including chase cutting and hooking/welding to existing RCC and like including demolition of existing reinforced RCC . |
| 64 | M&L For RCC (1:2:4) type B-1 using 20 mm graded aggregate as in stairways parapet coping,including steps,staircase railing etc and work of similar type including any formwork required in sides/riser etc complete all as specified and directed. |
| 65 | M&L for form work to soffits of suspended slab such as roof slab,Floor slab, shelves and chajjas etc and making surface fair finished complete all as specified and directed. |
| 66 | Mild steel TMT bars 8 to 10 mm dia and over, cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 67 | M&L for demolition of RCC as in shelves of kitchen and almirah etc ,vertical balcony walls and similar work including cutting reinforcement as required complete all as specified and directed. |
| 68 | Demolition of PCC as in ground floor or any floor & Paving n.exc 15cm (Below or above) ground level including disposal of rubbish to a distance n.exc 500mtr where directed. |
| 69 | Dismantling of brick tiles single layer on roof, jointed and grouted/pointed in cement mortar including cleaning serviceable tiles and stacking properly for reuse, disposal of unserviceable tiles and debries/rubbles from site complete all as specified and directed |
| 70 | M &L for 40 mm thick brick tiles laid on cement mortar 1:6, 15mm thick and jointed grouted, flush pointed in cement mortar (1:3) complete all as specified and directed. |
| 71 | All as per ser item no-70.00 above but except tiles. complete all as specified and directed. |
| 72 | Demolition of mud in roofs, any thickness including plastering and leaping etc complete all as specified and directed |
| 73 | M & L for PCC (1:2:4) type B-1 (20 mm graded stone aggregates) as in padding over roof slab,coping,benching or mud stops and sunken portion bed for slope etc and similar works complete all as specified and directed. |
| 74 | Material and labour for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement in concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete all as specified and directed. |
| 75 | M& L for 15mm rendering in cm (1:3) as in sunken portion surfaces including WPC @3% by weight of cement, finished the surfaces even and smooth without using extra cement complete all as specified and directed.Note: WPC should be under sepearate item. |
| 76 | S & F in repairs 40mm dia GI pipe medium grade as in spout of sunken floor,roof surface all as spesified and directed |
| 77 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm for roof surface,providing overlap on sides and edges of roof for overlap including cleaning surfaces etc complete all as specified and directed. |
| 78 | M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof (including chase cutting on sides of parapet wall roof for membrane and making good with CM 1:3 as per SSR Part-I), sunken portion laid on bitumen surfaces by forced torching application complete all as specified and directed. |
| 79 | M&L for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in 75 mm thick plinth protection and as in path including demolition of PCC, finishing cement concrete surfaces even and smooth without using extra cement, joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.complete all as specified and directed. |
| 80 | S & F machine pressed factory made precast coloured chequered cement concrete tile 30 cm x 30 cm x 25 mm thk set, jointed & pointed in neat cement slurry with grey cement and pigment in floor including screed bed 20mm thick in CM 1:6 bedded and jointed complete all as specified and directed. |
| 81 | M&L for 75mm thick PCC 1:4:8 type C-2 20mm graded aggregate as in sub base of flooring complete all as specified and directed. |
| 82 | Dismantling cast iron/PVC pipe 75/100mm bore fixed to wall/laid in trenches etc including any type of joints,T,Y,bend etc complete all as specified and directed. |
| 83 | Supply and fixing for PVC (SWR) floor trap 110 mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1,complete including dismantling of CI floor trap all as specified and directed. |
| 84 | Supply and fixing 110 mm bore PVC (SWR) pipes rain water pipe single socketed in any length joints fixed to walls with and including clamps(Minimum 03 Nos each span any length), nut bolts etc complete all as specified including demolition of existing PVC rainwater pipe complete all as specified and directed . |
| 85 | Supply and fixing 110 mm bore PVC (SWR) pipes for sullage,toilet and bath single socketed in any length joints fixed to walls with and including clamps, nut bolts etc complete all as specified and directed. |
| 86 | Supply and fixing 75 mm bore PVC (SWR) pipes waste pipe single socketed in any length jointslaid in floor, trenches etc set in cement mortar complete all as specified.and directed . |
| 87 | S&F PVC(SWR) Junction 'T','Y' etc and similar pieces of 110mm equal or unequal with access door to be fitted with PVC pipe complete all as specified and directed . |
| 88 | Supply and fixing PVC (SWR) bends with access doors 110mm bore ( in any radius) diminishing peices or tapers (larger bore measured) ,complete all as specified and directed. |
| 89 | Supply and fixing PVC (SWR) bends without access doors 110mm bore ( in any radius) diminishing peices or tapers (larger bore measured) ,complete all as specified and directed. |
| 90 | S&F in repair PVC(SWR) vent cowl 110 mm bore complete all as specified and directed . |
| 91 | M&L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC parapets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl necessary renforcement 6mm to 08mm TMT bars , form work , MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 at any height of buildings making edges fair and even and smooth etc completed all as specified and directed. |
| 92 | S&F for 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality (size/frame of board, design of bd, type of print on sheet, size of studd, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL to 29 Mtr height incl stainless steel studds (min 4 studs at each board / sheet ) complete all as specified and directed incl dismantling of existing damaged sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70kg per sqm (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818). |
| 93 | Supply and fixing Godrej pattern cupboard shutter of 0.8-0.85mm thick MS sheet fixed in & including angle iron frame 35x35x5mm including necessary fittings such as CP handle,lugs, hinges, locking arrangement including two coats of synthetic enamalled shop coat spray paints over a coat primer complete and making good with PCC 1:2:4 to dismantled/broken portion complete all as specified and directed. |
| 94 | Supplying and fixing 18mm thick PVC sheet (Celuca ply of Rajshree make or equivalent as approved by GE) in kitchen cabinet shelves and similar works complete all as specified and directed. |
| 95 | M&L for 18-20mm thick PVC board for shutter one side prelaminated (Celuca ply of Rajshree make or Equivalent as approved by GE) in shutter of kitchen cupboard etc and including piano hinges 35mm thick electrogalvanised through length of shutter,magnetic catcher,stainless steel handle 100mm one for for each shutter complete all as specified and directed. |
| 96 | S&F 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified. |
| 97 | M&L Intergral Water Proofing compound @3% by weight of cement complete all as specified and directed. Please Enable Macros to View BoQ information |
| 98 | M&L Intergral Water Proofing compound @3% by weight of cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender