Tender For Special Repair To Road Incl Road Furniture And Allied Works From Ganju Lama Dwar To Signla Gate At New Mil Stn Gangtok And special Repair Road From Bldg No P-231 C Coy To Adm Block Of Asc Bn Under Ge Gangtok.
Tender Value
75.92 Lakhs
Estimated cost
Bid Submission
30 Sep 2026
28 days left
EMD
1.38 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gangtok → sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road Incl Road Furniture And Allied Works From Ganju Lama Dwar To Signla Gate At New Mil Stn Gangtok And special Repair Road From Bldg No P-231 C Coy To Adm Block Of Asc Bn Under Ge Gangtok.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 sqm, depth not exceeding 50mm and segregation materials stacking for reuse and remove from the site of work complete all as specified and as directed. |
| 2 | M&L for 100 mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stone inter stices filled, surface formed and rolled and consolidated to required gradient and camber required using 8 to 12 tonne power mechanical road roller, complete all as specified and directed. |
| 3 | M&L 150 cm thick (Compacted thickness) WBM in two layer (75 mm in each layer) with Granite, trap or Basalt, coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required using 8-12 tonne power road roller, complete all as specified and directed. |
| 4 | M&L for preparing unsurfaced / new water bound macadam(WBM) surfaces by brushing with Wire Brushes for removing Caked, Mud, etc., Sweeping with Brooms and finally Fanning the Cleaned Surface with Gunny Bags to remove all loose dirts, etc. and applying evenly a priming/tack coat with bituminous primer of grade 10 Pack (VG-10) @ 10kg per 10 sqm over WBM surfaces, complete all as specified and directed. |
| 5 | M&L for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (VG-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (VG-30) @9.8 kg per 10 sqm blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed. |
| 6 | M&L for premix bituminous macadam using paving bitumen of grade 30 Pack (VG-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed. |
| 7 | M&L for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweepijng with brooms and finally fanning the cleaned surface with gunny bags / by mechanical means to remove all loose dirt etc., complete all as specified and as directed. |
| 8 | M&L for applying evenly a priming / tack coat with bitumen primer using paving bitumen of grade 10 Pack (VG-10) @ 5 Kg per 10 sqm, complete all as specified and as directed. |
| 9 | M&L for bituminous premix asphaltic semi-dense concrete 40mm consolidated thickness with 5.5% binder content of paving bitumen grade 30 pack (VG-30) by weight of total mix, mixed in mechanical hot mix plant and remixed material laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller to required compaction complete all as specified in the relevant clause of SSR Part-I (2009) and complete all as specified and as directed.Note: (a) Rate deemed to be included for making goods of any undulation / damages in wearing surfaces, where semi-dense asphaltic concrete to be laid.(b) Semi-dense asphaltic bituminous concrete shall be designed as specified and binder content shall be provided as per design mix, bidder shall quote his rates considering the bitumen contents as 5.5%. Any varition in binder content on minus side shall be adjusted at the rate of Rs. 50.00 per kilogram of binder but variaton in binder plus side shall not be paid exta, contractor shall quote accordingly. |
| 10 | M&L for Painting centre lines, stop lines, dashes, arrows etc with hot applied thermoplastic compound paint, n.exc 10 cm width confirming to MORTH specification machanically applied to from 2.0 mm to 2.5 mm thick filim on road surface including cleaning and drying the existing road surface to ensure dust, oil, grease and moisture free surface before applying the paint etc. complete all as specified and directed. |
| 11 | Supply and fixing in repair Cat Eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions and all as specified and directed. |
| 12 | Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (150x150x300mm) type B1 complete all as specified and directed. |
| 13 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed. |
| 14 | M&L for plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed. |
| 15 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surface of concrete, all as specified and directed. |
| 16 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and as directed. |
| 17 | M&L for rendering 10mm thick on block concrete masonry walls or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement with Neeru finish to plastering as specified and as directed. |
| 18 | M&L for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 Cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 Pack (VG-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed. |
| 19 | M&L for premixed sand seal coat by applying paving bitumen grade 30 Pack (VG-30) @ 6.8 kg per 10 Sqm blinded with sand @ 0.06 cum per 10 Sqm applied and rolled to a uniformed smooth surface with 8 to 12 tonne power road roller, complete all as specified and directed. |
| 20 | M&L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on road pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers' instructions complete all as specified and directed. |
| 21 | M&L for 100mm thick plain cement concrete(1:3:6), type C-2 (40 mm graded stone aggregate) as in sub-base, floor, plinth protection, hard standing, paving etc., complete all as specified and directed. |
| 22 | Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates.Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender