Tender For Provision Of Wall Panelling, Vertical Blinds & Floor Tiling Work In Various Rooms Of Dipr, Renovation Of Ground Floor Toilets Of Simulation Chamber Complex At Dipas Lab And Provision Of Additional 5 Point And Other Connected Works In Issa
Tender Value
27.06 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
20 days left
EMD
54120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Wall Panelling, Vertical Blinds & Floor Tiling Work In Various Rooms Of Dipr, Renovation Of Ground Floor Toilets Of Simulation Chamber Complex At Dipas Lab And Provision Of Additional 5 Point And Other Connected Works In Issa And Bhaskar Building (Issa Lab ) At Metcalfe House Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor tiles / hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises out side MOD land complete all as specified and directed. |
| 2 | M&L for vitrified ceramic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 3 | M&L for vitrified ceramic tiles 9 to 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in skirting/dado etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick cement mortar in CM (1:4) complete all as specified and directed. |
| 4 | M&L for decorative wall paneling with WPC wall panels with plastic and silicate mixture as the core material with in and surface with PVC foil on the top with thickness of panel 10mm to 20mm, width of 150mm to 200mm and length of 2.74/3.05 (9' or 10') meters of POLYWOOD or equivalent brand Wt of PVC panel is 4.5 kg/sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge. |
| 5 | S&F manually opening and closing double roller type venetian blinds approved make with characteristic composition 100 % polyester (translucent) fixed in position complete, all as specified and as directed. |
| 6 | M&L for Complete removal of existing treatment from internal plastered or unplastered surfaces of walls and applying two coats of oil bound distemper on walls after completion of putty work (if reqd on site) on scrapped/uneven surface of any description to match with the existing surfaces before application of paint etc complete all as specified and directed. |
| 7 | M & L non skid coloured tiles 400mm X 400mm X 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick cement screeding in CM (1:6) complete all as specified and directed. |
| 8 | Material and labour for providing glazed ceramic designer coloured tiles of size 450x300x 7 to 8 mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface of tiles over and including 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed. |
| 9 | S & F in repair vitreous china pedestal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including pvc sheet cover and CP jet and flush pipe/L bend etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 10 | Supply and fixing in repair vitreous china squatting pan \\"Orissa\\" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 11 | Supply and fixing in repair PVC valveless symphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed. |
| 12 | M&L machine cut Granite slab 15 mm thick fixed as in steps, pillars, skirting/dado, window sills, cooking platforms, wash basin platforms and like and incl 10mm thick (avg thickness) CM (1:4) screeding and setting coat in CM (1:2), 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polishing etc complete all as specified. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as specified and directed. |
| 13 | Supply & fixing in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm brass chromium plated waste coupling 32mm diameter, with fly nuts, PVC waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified & directed. |
| 14 | S&F in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws complete all as specified. |
| 15 | Supply and fixing in repair 15mm diameter PVC connection with brass nut, of length 450mm, fixed as in repairs, complete all as specified and directed. |
| 16 | Supply and fixing in repair long body Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 17 | Supply and fixing in repair angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 18 | Supply and fixing in repair angle stop valve 2-in-1 type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 19 | Supply and fixing in repair Pillar tap Swivel neck with rotating spouts chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 20 | S&F in repair toilet paper holder with flat recessed type stainless steel box type fixed to wall, with chromium plated brass screws, complete all as specified and directed. |
| 21 | S&F 100 mm diameter mild steel chromium plated grating fixed as in repair complete all as specified and directed. |
| 22 | S&F 32mm diameter PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 23 | S&F in repair CP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed. |
| 24 | Supply and fixing brass chromium plated tubular towel rail 20mm diameter 60 cm long between flanges, fixed to walls with necessary screws complete all as specified and directed. |
| 25 | Supply and fixing brass chromium plated tubular towel ring having diameter of ring not less than 150mm fixed to walls with necessary screws complete all as specified and directed. |
| 26 | Providing and fixing CPVC Pipes 25 mm diameter SDR 11 and Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor as in concealed/open work including cutting chases in wall upto required depth and length including all necessary brass and plain fittings all as per direction of Engineer-in-charge. |
| 27 | Providing and fixing CPVC Pipes 20 mm outer diameter SDR 11 and Plain CPVC SDR 11 fittings on wall/ceiling or laying in floor as in concealed/open work including cutting chases in wall upto required depth and length including all necessary brass and plain fittings all as per direction of Engineer-in-charge. |
| 28 | S&F rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including taking down old tank, disonnecting and refixing the CPVC pipe and fittings complete all as specified and directed. |
| 29 | Supply and fixing for frameless looking mirror 5.50mm thick of required size with beveled edges and approved border design of selected quality glass, mounted on wall surfaces with fancy type SS screws having SS cover caps visible on mirror surface including Plastic protector cover for edges of looking mirror complete all as specified and directed byEngineer-in-charge. |
| 30 | S & F factory made solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specified and directed. |
| 31 | S & F factory made solid panel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specified and directed. |
| 32 | Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exceeding 1.5 sqm but not exceeding 4 sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 33 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm and making good to disturbed surface without any extra cost complete all as specified and directed. |
| 34 | S&F 100mm size butt hinges, medium weight cold rolled mild steel all as specified and directed. |
| 35 | S&F 150 mm long aluminum anodized barrel tower bolt of extruded section all as specified and directed. |
| 36 | S&F 150mm size aluminum handles cast type, anodized all as specified and directed. |
| 37 | S&F110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 38 | S&F 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 39 | S&F 75mm diameter PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required, fixed as in repair complete all as specified and directed. |
| 40 | S&F 75mm diameter PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed. |
| 41 | Removing Debris/ demolished materials by mechanical means including loading, transporting, unloading to outside Mod land up to any rise and lead complete as per direction of Engineer - in - charge. |
| 42 | S&F CPVC gate valves 20mm bore fixed complete all as specified and as directed. |
| 43 | Excavation as in trenches in any kind of soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge. |
| 44 | M&L Returning filling in hard/dense soil, in trenches and floor level raising etc including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 45 | Removing excavated material/Malba to a distance exceeding 1.5 Km and not exceeding 5 Km depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed. |
| 46 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggegrate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 47 | Dismantling of 150 mm to 300mm bore SGSW/PVC/DWC HDPE or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 48 | Providing and laying double wall corrugated HDPE pipe having OD 150 mm and thickness ranging from 3 to 5 mm with Pressure Rating/ PN Class as SN-08 conforming to IS 16098-2 including laid over prepared bed as per manufacturer instruction complete all as specified and directed. |
| 49 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm to 300mm external diameter after they are laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L Cutting into existing manhole for connecting into new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section), in cement concrete (1:2:4), type B-1, (using 20mm graded stone aggregate), smooth finished and reforming benching as required for 150 mm bore SGSW / RCC pipe, complete all as specified and directed. |
| 51 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal diameter after they are laid and tested complete all as specified and directed by Engineer-in-Charge. |
| 52 | Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified and directed. |
| 53 | M&L for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in CM (1:6) complete all as specified and directed. |
| 54 | Taking down cement plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed. |
| 55 | M&L 15mm thick rendering in CM (1:6) on fair faces of new or old brick works or concrete work finished even & smooth without using extra cement complete all as specified and as directed. |
| 56 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of alkali resistant primer complete all as specified and directed. |
| 57 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl plasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil emulsion distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified & directed. |
| 58 | M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying Material & Labour for applying Two or more coat of 100% Premium Acrylic Emulsion Paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer complete all as specified. |
| 59 | Dismantling false ceiling, boarding any type on wall / ceiling, aluminium/ Gypsum partitions, doors, windows, fixed glazing including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 60 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid with inbuilt designer groove of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 8 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 61 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 62 | S & F Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, and all necessary builder hardware etc. complete all as specified and directed |
| 63 | S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and all necessary builder hardware etc. complete all as specified |
| 64 | S&F 12 mm thick prelaminated particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/partitions etc complete all as specified and as directed. |
| 65 | S&F in repair 4.8 mm thick sheet glass ordinary quality,fixing by means of glazing pins and rubber beading etc in aluminium partitions, windows, doors etc complete all as specified and as directed. |
| 66 | S&F designer glass film of approved pattern 25 micron reflective type with designer etching, LOGO of labs etc and similar work sticked to glass panes of doors, windows, partitions etc as per manufacturer's instructions complete all as specified and as directed. |
| 67 | S&F door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 68 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. sqm 617.05 |
| 69 | S&F urinal toughened glass partition 10 mm thick etched glass of size 600 x 900mm with support of CP frame fancy type as approved by GE complete all as specified and directed by Engineer-in-chrge. |
| 70 | M&L for providing and fixing 12mm thick frameless Toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing including required door fittings such as SS fancy type handles, SS mortice lock all complete as per direction of Engineer-in-Charge. |
| 71 | M&L for 12mm thick Toughned glass work as in partitions opening, serving counters, windows opening,and similar work including cutting to shape, drilling holes required anf fixed using SS fancy type clamps complete as per direction of Engineer-in-Charge. |
| 72 | M&L for point wiring with PVC insulated unsheathed FRLS wire 1.5 Sqmm multi stranded two single copper conductor cable passing through in existing PVC/steel conduit pipe complete with all accessories and with 1.5 Sqmm PVC insulated copper cable FRLS as continuous earth wire with recessed mounting GI sheet box with cover plate suitable for modular switch of adequate size including cutting chases in wall where required for inserting new conduit being included and making good the distrubed surface to match with the existing complete all as specified and directed . |
| 73 | One light/ fan point controlled by one switch with copper cables 1.5 Sqmm size. |
| 74 | One 3 pin socket 5 Amp outlet on independent board. |
| 75 | One 3 pin socket 5 Amp outlet on same board. |
| 76 | All as per item No 72 here in before but for one socket point out let 3 pin 15 Amp with 2.5 Sqmm PVC copper conductor FRLS and 2.5 sqmm PVC insulated copper conductor FRLS as earth continuity conductor complete all as specified and directed. |
| 77 | M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLS 4 Sqmm multi stranded two single copper conductor in Including PVC conduit pipe complete with all accessories and with 2.5 Sqmm PVC insulated copper cable FRLS continous earth wire, re-recessed mounting pressed steel (mild steel) sheet box suitable for modular switch/sockets/AC metal clad socket of adequate size complete all as specified and directed. |
| 78 | Supply and fixing in replacement of modular switch single pole one way 16A 1 module complete all as specified and directed. |
| 79 | Supply and fixing in replacement of modular switch single pole one way 6A 1 module complete all as specified and directed. |
| 80 | S & F of electronic fan regulator 240 V 5step type single pole complete all as specified and directed . |
| 81 | M&L in of modular socket 15A/16A -3/5 pin combined 2 module complete all as specified and directed. |
| 82 | M&L of modular socket 5/6 A-2/3 pin combined 2 module complete all as specified and directed. Please Enable Macros to View BoQ information |
| 83 | M&L of modular socket 5/6 A-2/3 pin combined 2 module complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender