Tender For Special Repairs- Maintenance And Renovation Of Esi Dispensary, Perumbavoor.
Tender Value
71.65 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
8 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs- Maintenance And Renovation Of Esi Dispensary, Perumbavoor.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL & Electrical WORKS |
| 2 | Earth work in excavation by mechanical means(Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal ofexcavated earth lead upto 50 m and for all lift, asdirected by Engineer-in charge :All kinds of soil. |
| 3 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers notexceeding 20cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 and for alllift |
| 4 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 gradedstone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 gradedstone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:4:8 (1 cement : 4 coarse sand (zone-III): 8 gradedstone aggregate 40 mm nominal size) |
| 7 | Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attachedpilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills,fillets, sunken floor etc., up to floor five level, excludingthe cost of centering, shuttering and finishing:1:11⁄2:3 (1 cement : 11⁄2 coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources). |
| 8 | Centering and shuttering including strutting, proppingetc. and removal of form work for :Foundations, footings, bases for columns |
| 9 | Providing and laying in position specified grade ofreinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - Allwork up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 10 | Centering and shuttering including strutting, proppingetc. and removal of form forLintels, beams, plinth beams, girders, bressumers andcantilevers |
| 11 | Half brick masonry with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 12 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dashfastener shall be paid for separately).Second class teak wood |
| 13 | Providing and fixing panelling or panelling and glazingin panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening forpanel inserts excluding portion inside grooves orrebates to be measured). Panelling for panelled orpanelled and glazed shutters 25 mm to 40 mm thick.Second class teak wood |
| 14 | Extra for providing frosted glass panes 4 mm thick(weight not less than 10 kg per sqm) instead of ordinaryfloat glass panes 4 mm thick (weight not less than 10 kgper sqm) in doors, windows and clerestory windowshutters. (Area of opening for glass panes excludingportion inside rebate shall be measured). |
| 15 | Providing 40x5 mm flat iron hold fast 400 mm longincluding fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cementconcrete block 300x100x150 mm 1:3:6 mix (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 16 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidisedas per IS 1378)300x16 mm |
| 17 | Providing and fixing ISI marked oxidised M.S. tower boltblack finish, (Barrel type) with necessary screws etc.complete (Copper oxidised as per IS 1378)250x10 mm |
| 18 | ----do------150x10 mm |
| 19 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:50x37x1.50 mm |
| 20 | Providing and fixing bright finished brass handles withscrews etc. complete:125 mm |
| 21 | Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade,with necessary screws etc. complete :200x10mm |
| 22 | Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 23 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge,manufacturer’s specification & drawing.30 mm thick plain PVC door shutters |
| 24 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conforming to IS: 710 |
| 25 | Structural steel work in single section, fixed with orwithout connecting plate, including cutting, hoisting,fixing in position and applying a priming coat ofapproved steel primer all complete |
| 26 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in positioin and includingwelding and bolted with special shaped washers etc.completeHot finished welded type tubes |
| 27 | Providing and fixing mild steel round holding down boltswith nuts and washer plates complete |
| 28 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat ofapproved steel primer. |
| 29 | Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 30 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, Dado, laid with cement based high polymer modified quick set tileadhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
| 31 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm. |
| 32 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer),with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness,including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
| 33 | 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand) |
| 34 | Finishing walls with Premium Acrylic Smooth exteriorpaint with Silicone additives of required shade :New work (Two or more coats applied @ 1.43 ltr/10sqm over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm) |
| 35 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10sqm over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm. |
| 36 | Finishing with Epoxy paint (two or more coats) at alllocations prepared and applied as per manufacturer'sspecifications including appropriate priming coat,preparation of surface, etc. complete.On steel work |
| 37 | Finishing with Epoxy paint (two or more coats) at alllocations prepared and applied as per manufacturer'sspecifications including appropriate priming coat,preparation of surface, etc. complete.One or more coats on old work |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 39 | Finishing walls with Premium Acrylic Smooth exteriorpaint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10sqm over and including priming coat of exterior primerapplied @ 0.90 litre/10 sqm) |
| 40 | Wall painting with premium acrylic emulsion paint,having VOC (Volatile Organic Compound ) content lessthan 50 grams/ litre, of approved brand andmanufacture, including applying additional coatswherever required, to achieve even shade and colour.Two coats |
| 41 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 42 | Removing dry or oil bound distemper, water proofingcement paint and the like by scrapping, sand paperingand preparing the surface smooth including necessaryrepairs to scratches etc complete. |
| 43 | Rerpairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping groundwithin 50 meters lead : with cement mortar 1:4(1cement : 4 coarse sand |
| 44 | Taking out existing wooden door shutter, repair bycutting, painting etc. and refixing of repaired doorshutters to existing door frames, including replacementof hinges with screws, etc. as required, all complete asper the direction of the Engineer-in-charge. |
| 45 | Demolishing cement concrete manually/ by mechanicalmeans including disposal of material within 50 metreslead as per direction of Engineer - in - charge.Nominalconcrete 1:4:8 or leaner mix (including equivalentdesign mix) |
| 46 | Dimolishing brick work manually/by mechanical meansincluding stacking of serviceable material and disposalof unserviceable material within 50 meters lead as perdirection of Engineer-in-ChargeIn cement mortar |
| 47 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below |
| 48 | Dismantling tile work in floors and roofs laid in cementmortar including stacking material within 50 metreslead For thickness of tiles 10 mm to 25 mm all completeas per direction of Engineer-In-Charge : |
| 49 | Dismantling of flushing cistern of all types(C.I./PVC/Vitrious China) including stacking of usefulmaterials near the site and disposal of unserviceablematerials within 50 metres lead. |
| 50 | Dismantling of EWC of all types including stacking ofuseful materials near the site and disposal ofunserviceable materials within 50 metres lead. |
| 51 | Dismantling old plaster or skirting raking out joints andcleaning the surfaces for plaster including disposal ofrubbish to the dumping ground within 50 metres lead |
| 52 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 53 | Demolishing stone rubble masonry manually/ bymechanical means including stacking of serviceablematerial and disposal of unserviceable material within50 metres lead as per direction of Engineer-in-charge :In cement mortar |
| 54 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid inrequired colour and pattern over and including 50mmthick compacted bed 6mm stone aggregate , filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 55 | Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 56 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequire:White Vitreous China Wash basin size 630x450mm with a single 15 mm C.P. brass pillar tap. |
| 57 | Providing and fixing 600x450 mm beveled edge mirrorof superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 58 | 600 mm long towel rail with total length of 645 mm,width 78 mm and effective height of 88 mm, weighingnot less than 190 gms |
| 59 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply,including all CPVC plain & brass threadedfittings, i/c fixing the pipe with clampsat 1.00 m spacing.This includes jointing of pipes & fittings with one stepCPVC solvent cement and the cost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Charge,concealed work -- 15 mm nominal dia Pipes |
| 60 | -----do------20 mm nominal dia Pipes |
| 61 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.--- 15 mm nominal bore |
| 62 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make co 15 mm nominal borenforming to IS:8931. |
| 63 | Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 64 | Providing and fixing precoated galvanised ion profilesheets(size, shape and pitch of corrugation as approved by Engineer - in - charge)of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickenss of 0.05 mm) with zinc coating 120 grams persqm. as IS :277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protecive guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge. The sheet shall be fixed using self drilling/self tapping screws of size(5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaes, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 65 | Providing and fixing precoated galvanised sheet roofingaccessories of total coated thickness 0.50 mm (basemetal of minimum 0.45 mm thickenss with total coatingthickness of 0.05 mm ) with Zinc coating 120 gram persqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500 - 600 mm) |
| 66 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13952 Typr A,including jointing with seal ring conorming to IS :leaving 10 mm gap for thermal expansion, singlesocketed pipes, 110 mm diameter.24.00 Metre 495.73 11897.52 |
| 67 | Supply and Fitting Health faucet superior quality |
| 68 | Supply and fixing of PVC Pipes:Working Pressure: 6 kg.per cm2: 75mm dia |
| 69 | Supply and fixing of PVC Pipes:Working Pressure: 6 kg.per cm2: 110mm dia |
| 70 | Random Rubble masonry with hard stone includind upto plinth level: Using cement mortar 1:6 ( cement & 6coarse sand) |
| 71 | Solid block masonary using precast solid blocks (Factory made) of size 30 x 20 x 15 cm or nearest available size confirming IS 2185 part 1 of 9794 for upto 1.8m from ground level with thickness 20 cm in cement mortor 1 :6(1 cement : 6 course sand). etc its complete as per direction of engineer in charge.Cement Mortor 1:6 |
| 72 | Wiring for light point/ fan point/ exhaust fan point/ callbell point with 1.5 sq.mm FRLS/HFFR PVC insulatedcopper conductor single core cable in surface/recessed medium class PVC conduit, with modularswitch, modular plate, suitable GI box and earthing thepoint with 1.5 sq.mm FRLS/HFFR PVC insulated copperconductor single core cable etc. as required. Group-C |
| 73 | Wiring for circuit/ submain wiring along with earth wirewith the following sizes of FRLS/HFFR PVC insulated 55 copper conductor, single core cable in surface/recessed medium class PVC conduit as required. ) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 74 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 75 | Supply, Installation, Testing and Commissioning ofceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value CM/M/W)minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion)less than 10%, suitable for operation with regulator forspeed control and all remaining accessories includingsafety pin, nut bolts, washers, temperaturerise=75 0C (max.), insulation resistance more than 2mega ohm, suitable for 230 V, 50 Hz, single phase ACsupply, Ceiling Fan compliant to IS 374:2019 fan i/cexternal connections with 1.5 sq.mm FRLS/HFFR, PVCinsulated copper conductor single core cable andearthing etc. as required.1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery245 CM/Min (Minimum) |
| 76 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 77 | Supplying and fixing 3 pin, 5 A ceiling rose on theexisting junction box/ wooden block includingconnections etc. as required. |
| 78 | Supplying and fixing call bell/ buzzer suitable for singlephase, 230 V, complete as required. |
| 79 | Supply only Exhaust fan 300 mm sweep heavy duty |
| 80 | Installation of exhaust fan in the existing opening,making good the damage, connection, testing,includingcommissioning etc. as required.Upto 450mm sweep |
| 81 | Supplying and fixing PVC batten/ angle holderincludingconnections etc. as required. |
| 82 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \\"C\\" curve, miniature circuit breaker suitable forinductive load of following poles in the existing MCB DBcomplete with connections, testing and commissioningetc. as required.Single pole |
| 83 | Supplying and fixing single pole blanking plate in theexisting MCB DB complete etc. as required. |
| 84 | Supplying and fixing following rating, four pole, 415 V,isolator 63 A in the existing MCB DB complete withconnections, testing and commissioning etc. as required63 A |
| 85 | Supplying and fixing 4 way (8+12) , horizontal typeThree pole and neutral,sheet steel, MCB distributionboard, 415 V, on surface/ recess,complete with tinnedcopper bus bar, neutral bus bar, earthbar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) model DHDNTHCDRW08 make Havells |
| 86 | Supplying and fixing following 63 A rating, Four pole,(Three phase and neutral), 415 V, residual currentcircuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections,testing and commissioning etc. as required. |
| 87 | Supplying and fixing of 25 W LED street Light/ pole lightmodel ENDURASUNDOWNSL25WLED765PASYBOPCmake Havells |
| 88 | Supply and fixing of PVC insulated and FR PVC roundsheathed coper conductor flexible cable of size 2core x 1.5 sqmm |
| 89 | PVC Box surface mounted suitable for fixing modularbaseplate for 1/ 2 moudule any ISI & reputed make. |
| 90 | _ Do _ for 3 moudule |
| 91 | _ Do _ for 4 moudule |
| 92 | _ Do _ for 6 moudule |
| 93 | _ Do _ for 8 moudule |
| 94 | _ Do _ for 12 moudule |
| 95 | Supply and fixing following modular switch/sockets inthe existing modular palte and box includingconnections but excluding modular palte as required5/6 A switch |
| 96 | 15/16 A switch |
| 97 | 3 pin 5/6 A socket outlet |
| 98 | 6 pin 15/16 A socket out let |
| 99 | Bell push |
| 100 | Modular Blanking Plate |
| 101 | Supplying and fixing following Modular base & coverplate on existing modular metal boxes etc. as required.For 1/2 module |
| 102 | Do -- but for 3 module |
| 103 | Do -- but for 4 module |
| 104 | Do -- but for 6 module |
| 105 | Do -- but for 8 module |
| 106 | Do -- but for 12 module |
| 107 | Supply and fixing of LED 25Watt tube light withcomplete set -LED Pride Ultra Nxt Batten 25 W 6500 KLHEXAZP7PN1W025 94051100 |
| 108 | supply and installation on wall , Fire extiguisher ABC 4kg(dry powder ) |
| 109 | Supply and installation of and onsite warrenty for 5KVA/72DC Pure sine ave DSP controlled transformerbased Home UPS(Inverter) with 6 Nos of 12 V/150 AHCPRI certified tubular battery with battery rack and allaccessories Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender