Tender For Renovation Of Priest Residence/ Seminary For The Chapel In S/No. 27/56, Dandora In Cuncolim Constituency Under Mla-Lad Scheme.
Tender Value
40.03 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
80078
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Priest Residence/ Seminary For The Chapel In S/No. 27/56, Dandora In Cuncolim Constituency Under Mla-Lad Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removalof rubbish upto a distanceof 50 m outside theperiphery of the area |
| 2 | Dismantling tiled roofing(mangalore or pot orcountry tiles) with battensetc. complete includingstacking of serviceablematerial & disposal ofunserviceable materialwithin 50 mts. lead. |
| 3 | Dismantling wood work ofsectional area 40 sq.cm.and above wrought framedand fixed in frames otherframes and trussesincluding stacking ofmaterial within 50 mts.lead (span upto l0 mtrs.) |
| 4 | Dismantling doorswindows and clearestorywindows (steel or wood)shutters includingchowkhats architraveholdfast etc. complete andstaking within 50 mt. Lead:Of area3 sq.m. and below |
| 5 | Repairs to plaster inpatches of 2.5 sq.m. andunder including cutting thepatch in proper shape andpreparing and plasteringthe surface of the wallscomplete includingdisposal of rubbish to thedumping ground within S0m lead.; With cementmortar l:4(1 cement : 4fine sand) |
| 6 | Demolishing cemcntconcrete l:4:8 or leanermix including disposal ofmaterial within 50 m lead. |
| 7 | Demolishing brick work incement mortar includingstacking of serviccablematerial & disposal ofunserviceable materialwithin 50 mts. lead. |
| 8 | Demolishing laterite stonemasonry in cement mortarincluding stacking ofserviceable material &disposal of unserviceablematerial within 50 mts.lead. |
| 9 | Dismantling the tile workin floors and roofs laid incement including stackingof materials within 50meters lead for thicknessof tiles 10mm to 25mm. |
| 10 | Removing white or colourwash by scrapping sandpapering and preparingsurface smooth includingnecessary repairs toscratches etc. complete. |
| 11 | Earthwork in excavationby mechanical means(hydraulic excavator)/manual means infoundation pipelinetrenches drain (notexceeding 1.5 m in widthor 10 sq.m. on plan)including dressing of sidesand ramming of bottomslift upto 1.5 m includinggetting out the excavatedsoil and disposal of surplusexcavated soil as directedwithin a lead of 50 m.;Allkinds of soil |
| 12 | Rubble packing with hardlaterite stone under floorsincBuding wateringramming and consolidating ete. in pipcline trenchesnnd other foundationscomplete. |
| 13 | Providing & laying cementconcrete 1:2:4 (1 cement: 2coarse sand: 4 gradedgranitic or basaltic stoneaggrt. 20 mm. nominalsize) excluding cost ofcentering shuttering andfinishing in:;All worksupto plinth level |
| 14 | Centering & shutteringincluding StruttingPropping & removal offorms for ::FoundationsFootings Bases for columns |
| 15 | Centering & shutteringincluding StruttingPropping & removal offorms for :;Sides andSoffits of beams BeamHaunchings CantileverGirders Bressumers andLintels plinth beams notexceeding Im in depth |
| 16 | Centering & shutteringincluding StruttingPropping & removal offorms for :;Suspendedfloors roofs landingsshelves & their supports |
| 17 | Providing and laying inposition (1:11/2:3)Reinforced cement conreteexcluding the cost ofcentering shutteringfinishing andreinfrocement (1 cement:1½ coarse sand:3 gradedstone agg 20mm nominalsize);All works upto plinthlevel |
| 18 | Providing and laying inposition (1:11/2:3)Reinforced cement conreteexcluding the cost ofcentering shutteringfinishing andreinfrocement (1 cement:1½ coarse sand:3 gradedstone agg 20mm nominalsize);In beams suspended floors roofs having slopeupto 15° landingsbalconies shelves chajjaslintels bands plain window silBs staircases upto floorfive level |
| 19 | Providing TMT steelreinforcement bars of(SAIL TATA. VIZAGJSW Steel Ltd.) )(Confirming to IS 1786 of1986) for RCC work(conforming to I.S. 1786 of1986) including bendingbinding & placing inposition in all the floorsalong with the factorymade precast concretecover blocks of specifiedsizes whose compressivestrength is not less thanthat of surroundingconcrete in the structuralmember. |
| 20 | Laterite masonry in neatlydressed stones of size asspecified in cement mortar1:4 (1 cement:4 coarsesand) in foundation andbasement. |
| 21 | Laterite masonry in neatly dressed stones for 23 cmsthick masonry walls in c.m. 1:4 (1 cement :4coarse sand in foundationupto plinth level |
| 22 | Extra for laterite masonry in all sizes insuperstructure from floor Ilevel upto floor V level. |
| 23 | Half brick masonry incement mortar1:3 (1cement:3 coarse sand)with bricks of classdesignation 75 kg /cm2.;Infoundation and plinth.;Upto floor V level. |
| 24 | Refilling the pipeline/foundation trenches plinth sidesfoundation etc. withavailable excavated earthin layers not exceeding 20 cm depth consolidatingeach layer ramming andwatering lead upto 50 Mand all lifts and disposal ofsurplus earth as directed byEngineer in Charge |
| 25 | 12mm cement plaster 1:4(| cement : 4 fine sand) |
| 26 | 18mm cement plaster intwo coats under layer12mm thick cement plaster1:5 (1 cement:5 coarsesand) and top layer 6mmnthick with cement plaster1:3 (1 cement:3 coarsesand) finished with sponge. |
| 27 | Steel work in built uptubular (round square orrectangular hollow tubesetc.) (Square HollowSection (SHS) IS4923/Rectangular HollowSection (RHS) IS4923/Circular Hollow Section(CHS) IS1161 closedStructural Steel of (SAILTATA. VIZAG JSWAPOLLO Steel Ltd.) make(Min Yeild Stress 310Mpa)) trusses etc.including cutting hoistingfixing in position andapplying a priming coat ofapproved steel primerincluding welding andbolted with special shapedwashers etc. complete. |
| 28 | Steel work welded (SAILTATA. VIZAG & usingelectrodes of Ador orES4B or Deh Secheronmake only)in built upsections trusses and framedwork including cuttinghoisting fixing in positionand applying priming coatof red lead paint.; In teesangles flats and channels |
| 29 | Painting two or more coats(excluding priming coat)with superior quality readymixed paint for steel workof approved brand &manufacture in all shades on new work to give an even shade. |
| 30 | Providing & Fixing inposition Double Skin roofwith Zincalume/Galvalume colour coated& bare profile sheet withsubtle square flutingfactory cut at all heightsfor roof side & Gablecladding complete in allrespect. TOP SHEET-Theend rib shall be designedfor anti-capillary action.The feed material shouldbe manufactured out ofnominal0.45 mm BaseMetal Thickness (BMT)Hi-strength steel with min.550 MPa yield strengthmetallic hot dip coatedwith Aluminium-Zincalloy (55% Aluminium43.5% Zinc &1.5% Si) asper AS 1397- ZincalumeAZI50 (Min. 150 gms/sq.mt total on both sides) withquality paint coat as per AS /NZS 2728 type 3-4. Thepaint shall have a totalcoating thickness ofnominal35 m comprisingof nominal 20 m exteriorSMP coat on top surfaceand nominal 5 m reversebacker coat on backsurface over nominal 5 mprimer coat on bothsurfaces of approvedcolour shade. Total CoatedThickness (TCT) should be0.50mm. Total PaintedThickness (TPT) should bein addition to 0.50mm. Thesteel sheet shall befastened with nominal 40m zinc coated or nominal25 m zinc-tin alloy coatedHex head self-drilling Screw as per AS 35662002 Class 3 fasteners ofapproved make withEPDM washer as per therequirement consideringthe profile shape anddesign load. The fastenersize shall be calculated asper the design or manutucturers recommendations,The profile sheet, faslenersize ele. shall be upprovedhy the Engineer. Thesheeting should be withminimum 200mm lap &waterproof with Siliconscalant non-hardeningneutral cure type shall beapplied at all end laps,complete as directed Z-SubGirt - roll formed sectionS0x50x50x1.50 TCT,120GSM Galvanised, HighStrength (345 MPa),approximate Wt. 1.85 kg/r.m. fixed with self tappingscrews Glass WoolInsulation with FSK facing5Omm with 24 kg/m3density in between 2sheets. LINER SHEET bare galvalume/zincalume roofingsheet of same profile as topsheet. The feed material isof manufactured out ofnominal O.45 mm BaseMetal Thickness (BMT)(0.47 mm TCT), H0strength steel with min.550 MPa yield strength,metallic hot dip coatedwith Aluminium-Zincalloy (559% Aluminium,45% Zinc) as per AS 1397- Zincalume AZ150 (Min.150 gms/sq.mt total onboth sides), passivated &resin coated. The feedmaterial should have coilmanufacturer's productdetails marked at regularinterval for confirminggenuinity of the material. complete as per thedirections of the engineer.The steel manufacturer'stest certificate for thechemical & mechanicalproperties of steel must besubmitted for approvalprior to installation. |
| 31 | Providing and fixingcolour coated galvuliumroofing sheets of 0.5mmthickness including all the ncceNsories (TATA make)bul excluding the cost ofpurlins rafters trussesflashings etc, complete asper the directions of theEngineer in charge. |
| 32 | Add for providing & fixing Flashings -{Corners Ridgesvalleys gable end & Trims](Girth upto 61Omm)including all theaccessories complcte asper the directions of theEngincer in charge. |
| 33 | Providing and fixing tiledfalse ceiling of approvedmaterials of size 595x595mm in true horizontal levelsuspended on inter lockingmetal grid of hot dippedgalvanized steel sections(galvanized @ 120 grams/sqm both side inclusive)consisting of main \\"T\\"\\"runner with suitablyspaced joints to getrequired length and of size24x38 mm made from 0.30mm thick (minimum) sheetspaced at 1200 mm centerto center and cross \\"T\\"\\"of size 24/15x25 mm madeof 0.30 mm thick(minimum) sheet 1200 mmlong spaced between mainT\\" at 600 mm center tocenter to form a grid of1200x600 mm and secondary cross \\"\\"T\\"\\" oflength 600 mm and size24x25 mm made of 0.30mm thick (minimum) sheetto be interlocked at middleof the 1200x600 mm panelform grids of 600x600mm and wall angle of size24x24x0.3 mm and layingfalse ceiling tiles ofapproved texture in thegrid including requiredcutting/making opening forservices like diffusersgrills light fittings fixturessmoke detectors etc. MainT\\" runners to besuspended from ceilingusing GI slotted cleats of size 27 x 37 x 25/15 xl.6mm lixed to ceiling with12.5 mm din and 50 mmlong dash fasteners 4 mmGl adjustable rods withgalvanised butterfly levelclips of size 85 x 30 x 0.8mm spaccd at 1200 mmcenter to center along mainT bottom exposed width of24/15 mm of all T-sectionsshall be pre-painted withpolyester paint allcomplete for all heights asper specifications drawingsand as directed byEngineer.;GI Metal CeilingLay in plain Tegular/Bevelled edge Globalwhite color tiles of size595x595 mm and 0.4-0.5 mm thick with 8 mm drop;made of GI sheet havinggalvanizing of 100 gmsIsqm (both sides inclusive)and electro staticallypolyester powder coated ofthickness 60 microns(minimum) includingfactory painted afterbending.\\" |
| 34 | Providing and fixingvitrified glossy finished(600x600) and 1Omm thicktiles in floor treads of stepslanding on 25mm thick bedof cement mortar :3 andjointed with cement slurrycomplete. |
| 35 | Providing and fixingVitrified tiles in differentsizes (thickness to bespecified by manufacturer)with water absorption lessthan 0.08 % andconforming to I.S. 15622of approved make in allcolours shade in skirtingriser of steps and dadosjointing with grey cementslurry @3.3 kg per sqmincluding pointing/grouting in whitecement mixed withpigment of matching shadecomplete.;600 x 600 mm.light Shades |
| 36 | Providing and fixingvitrified antiskid tiles(320x320) and 10mm thicktiles in floor trcads of stepslanding on 25mm thick bedof cement mortar 1:3 andjointed with cement slurrycomplete. |
| 37 | Providing and fixing Istquality ceramic glazedwall tiles (JohnsonSomany Kajaria )conforming to IS:15622(thickness to be specifiedby the manufacture ofapproved make in allcolours shades exceptburgundy bottle greenblack of any size asapproved by Engineer-in-charge in skirtingrisers of steps and dadosover 12 mm thick bed ofcement mortar 1:3 (1cement:3 coarse sandand jointing with greycement slurry @3.3kg persq.m including pointing inwhite cement mixed withpigment of matching shadecomplete.;Wall Ceramic Glazed Tiles : 200 x 300 |
| 38 | Providing 25 mm thickcuddapah slabs machinecut and polished on eitherside in partitions includingmaking necessary groovesin the wall and fixing withcement mortar complete asdirected by the engineer-in-charge |
| 39 | Providing and fixing 18mm thick gang saw cutmirror polisbedpremoulded andprepolished machine cutfor kitchen platformsvarity counters windowsills facias and similarlocations of required sizeapproved shade colour andtexture laid over 20 mmthick base cement mortar l:4(1 cement: 4 coarsesand) joints treated withwhite cement mixed with matehing pigment epoxylouch ups includingnubbing curing mouldingand polishing to edges logive high gloss finish ete.complete at all levels.Granite of any colour andshade arca of slab ovcr0.50 sqm;Cherry Red |
| 40 | Extra for providingopcning of requircd size &shapc for wash basin/kitchen sink in kitchenplatform vanity counterand similar location in marble/Grarite/Cuddapah stone workincluding nccessary holesfor pillar taps etc.including mouldingrubbing and polishing ofcut edges etc. complete. |
| 41 | Providing flat iron holdfast 40 cm including fixingto frame with 10 mm diabolts nuts and woodenplugs and embeded incement concrete block 30 x10 x 15 cm 1:3:6 mix (1cement: 3 coarse sand: 6stone aggregate 20 mmnominal size.;40 x3 mmflat iron hold fast 40 cmlong |
| 42 | Providing woodwork inframes of doors windowsclerestory windows trussesother frames wroughtframed and fixed inpositon.;Second classIndian teak wood |
| 43 | Providing and fixing MS.grill of required patterm inwooden frames ofWindows etc. with M.S.flats square or round barswith round headed boltsand nuts or by by screws.;Ornamental grill |
| 44 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enameled iron butt hinges with necessary screws:Second class Indian teak wood |
| 45 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows.Plain glass |
| 46 | Extra for powder coatingwitlh pure polyeter powderof shade of required colouron the aluminium scction |
| 47 | FRP (Fiber ReinlorcelPolymer) l'rames withWood Finish ManulactureSupply and Installation(with anchor fastencr) ofEPEL or cquivalent Goanmake 'RP (iberRcinlorced Polymer)Frame of cross scction asper options bclow withright angle joint and FRP(Fiber ReinforccdPolymer) laminate madefrom 450 grams pcr sq.mts(gsm) chop strand glas8fiber (matt) andunsaturatcd polyester resinwith viscOsity range of 400|450 centipoiscs persccond (cps). The core offrame would be filled with scasoned wood as infillmaterial. The slot of framefor door resting will be ofsuitable width so as to takespecificd thickness door.The frame will be waterproof as well as mild acid/alkali resistantmanufactured in an ISO9001- 20I5 certificdcompany.Specified Cross Section;5\\" x 2 ½ |
| 48 | Wood Finish Foan CoreFRP (Fiber ReinforcelPolymer) Door Shutter.Manulacture Supply andInstallation (includingaccessoies as mentionedbelow) of EPEE orcquivalent Goan makeFRP (Fiber ReinforcedPolymer) door shutter ofspecified thickness as peroptions bclow by usingtray system with scasonedhard wood moisture lessthan 17% wood styles forTop rail and lock rails.FRP (Fiber ReinforcedPolymer) laminate madeup of 450 grams per sq.mts(gsm) chop strand matt andunsaturatcd polyester resinwith viscosity range of 400 1450 centipoises persecond (cps) along withprinted matt havingwooden textures usedalong with UV Resistantresin to give the clearwooden texture on thedoor. The core of shutterwill be filled as specified(Expanded PolystyreneFoam / Polyurethane Foam(EPS/PU) Foam) Theshutter to be water proof aswell as mild acid / alkaliresistant manufacturedusing RV TIFAC (RVEngineering CollegeBangalore & TechnologyInformation Forecasting &Assessment Council)Technology in line with IS13034 1990 test Standard in an ISO 9001 -2015certified factory.Accessories: i) S. S.Hinges 4\\" -3 No ii) s. S.Latch - 1 No ii)) TowerBolt 5\\" -2 Nos iv) Handle5\\" -2 Nos Note: For 35 &40mm thickness shuttersonly frames of 5 x 2 ½Cross section frames to beused.;Shutter Thickness;35mm |
| 49 | Providing and fixinganodised aluminium sliding door bolt anodisedtransparent or dyedrequired colour and shadewith bolis nuts and screwsetc. complete:;250 x l6 mm |
| 50 | Providing and fixing M.S.door latch with screws etc.completc:300 x 20 x 6 mm |
| 51 | Providing and fixing M.S.tower bolts (barrel type)with neccssary screws etc.complete;250 x 10 mm |
| 52 | Providing and fixing brightfinished brass handles withnecessary screws ctccomplete; 125 mm |
| 53 | Providing & fixing brightfinished brass 100 mm. rimlatch & lock & a pair ofknob with necessaryscrews etc. complete(Indian make of approvedquality). |
| 54 | Proving and fixing whitevitreous china water closetsquating (European type w.c. pan) with seat and lid C.P. brass hinges and rubberbuffers 10 Its. High level P.V.C.. flushing cistern (ofapproved make ) withfittings rack bolts 32 mmdiameter P.V.C. telescopicflush pipe with fit tingsand clamps 25mm P.V.C.over flow pipe withspecials & mosquito proofcoupling of approvedmunicipal design andnylon. chain and pullcomplete cutting andmaking good the walls adfloors where required.;W.C. pan with white plasticseat and lid. |
| 55 | Providing and fixingvitreous china wash basinwith RS or C.I. bracketspainted white 15 mm C.P.brass pillar taps C.P. brasschain with rubber plug 32mm C.P. brass waste ofpattern 32 mm diameter M. L. of C.P. brass trap andunion complete includ1ngcutting and making goodthe walls where required.;Flat back wash basin sizeS50 x 400mm with a single15 mm C.P. brass pillarlaps. |
| 56 | Proving and fixing kitchensink with R.S. or C.I.brackcts C.P. brass chainwith rubber plug 40 mm CP. brass waste and 40mmMI. or C.P. brass trapnecessary unions completeincluding painting thefitings cutting and makinggood the walls whererequircd.;White vitreouschina sink size 600x 450 x250 mm |
| 57 | Providing and fixing 600 x450 mm bevelled cdgemiror of superior glass (ofapproved quality) completewith 6 mm thick asbestossheet ground fixed towooden cleats with C.P.brass screws and washers. |
| 58 | Providing && fixing c.p.brass towel rail completewith C.P. brass bracketsfixed to wooden cleatswith C. P. brass screws;750 x 20 mm size |
| 59 | Constructing brickmasonry manhole orinspection chamber withsecond class bricks incement mortar 1:5(1cement 5 fine sand) R.C.C. top slab with 1: 1 1/2:3mix (1 cement: 1 1/2coarse sand ;3 graded stoneaggregate 20mm nominalsize foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2coarse sand :8 graded stoneagrregate 20mm nominalsize) inside plastering 12mm thick with cementmortar 1:3 (1 cement :3coarse sand) finished witha floating coat of neatcement and making channels in cementconcrete 1:2:4 mix (1cement :2 coarsc sand :4gruded stone aggregute 20mm nominal size) neatlyfinished complete as perstandard design.insidesize 90 x80 cm and 45 cmdeep including C.I. coverwith frame (light duty) 455x61Omm internaldimensions total weight ofcover ad frame to be notless than 38 kg. (weight ofcover 23 kg. ) |
| 60 | Providing and fixingNICKEL chrome platedcopper alloy Fancy longbody bib cock with wallflance Jaquar make orcquivalent. Confirming toIS 8931:1993;15mmnominal bore |
| 61 | Providing and fixingNICKEL chrome platedcopper alloy Fancyconcealed stop cock withsheet flance 20mm Jaquarmake or cquivalent.Confirming to IS 893 1;1993;20mm nominal bore |
| 62 | Providing and fixingNICKEL chrome platedcopper alloy Fancy wallmixer with 3 IN 1SYSTEM WITH 115MMlong bend pipe forconnection to over headshower Jaquar make orequivalent. Confirming toIS 8931;1993 |
| 63 | Providing and fixingNICKEL chrome platedcopper alloy FancyTELEPHONIC SHOWER1.5M FLEXIBLE TUBEWITH SWINGINGWALL HOOK Jaquarmake or equivalent.Confirming to IS 8931;1993 |
| 64 | Providing and fixing C.P.brass shower rose with 15or 20 mm. Inlet:;100 mm diameter. |
| 65 | Providing and fixing HandShower (Hcalth Faucet)with 8mm dia ABS/brassbody with double lock 1.00m long Flexible tube(Brass plated slainles steelflexible hose) and wallhook of approved qualityconfirming to IS standards. |
| 66 | Providing and placing onterrace roof of floor two(Ist flor roof single piecerotational mouldedpolythene water storagetank having I S I mark andconforming to I S 12701;1996.;1000 lit. capacity |
| 67 | Providing and fixing rigidPVC S.W.R. (soil waste &rain water drainage pipesof approved includinglubsicant etc. complete(single/double) socketed:;110 mm dia |
| 68 | Providing and fixing rigidPVC S.W.R. (soil waste &rain water drainage pipesof approved includinglubricant etc. complete(single/double) socketed:;75 mm dia |
| 69 | Providing and fixing rigidPVC bend of requireddegree (of approved make)for S.W.R. drainage pipesof approved including lubricating.;1 10 mm dia |
| 70 | Providing and fixing rigidPVC bend of requireddegree (of approved make)for S. W.R. drainage pipesof approved includinglubricating.;75 mm dia |
| 71 | Providing and fixingnahani trap of rigid PVC(approved make ) for S.W.R. pipes includinglubricating etc completewithout door :75 mm dia |
| 72 | Providing and fixing R.P.V. C vent cowl;|10 mon dia |
| 73 | Poviding and fixing ballvalve (brass) of approvedqualty ,high pressurewith P.V.C. loats:;25mmnominal bore |
| 74 | Providing and fixing brassfull way valve (heavy) duty with wheel of approved quality :50 mm nominal bore |
| 75 | Providing and fixingprefabricated compoundgate of G.I. pipcs 40 - 50mm dia (medium) with12mm M.S. square bars ofG.l. pipes grill work as perdrawing includingproviding & fixing lockingarrangements pintals holdfast cmbcdded in cementconcrete 1:2:4 (1 cement: 2coarse sand:4 granitic orbasaltic aggreate 20mmnominal size) includingapplying priming coat withready mixcd red lcad paintand painting 2 or morecoats with superior readymixed paint of approvedbrand and manufacture inall shades as per directioncomplete. |
| 76 | Providing and applyingwhite cement based puttyof average thickness 1.00mm of approved brand andmanufacturer over theplastered wall surface toprepare i the surface evenand smooth complete. |
| 77 | Applying one coat ofcement primer of approvedbrand and manufacture onwall surface. |
| 78 | Wall painting (two or morecoats) with plasticemulsion paint of approvedbrand and manufacture onnew work to give an evenshade. |
| 79 | Painting three or more coats with acryllic exteriorpaint of approved brandund marufacture (Such asDulex/ Asian Paints/Sherwin Willians)including applying onecoat of ccment primer andonc coat of surfacetreatment etc. complete. |
| 80 | Painting (two or morecoats) with syntheticcnamel paint of approvedbrand and manufacture inall shade or new work overand under coat of suitableshade with ordinary paintof approved brand andmanufacture to give ancvcn shade |
| 81 | Cleaning of open wellincluding pumping ofwater, removing of plastic,glass, wood, desilting ofwell, cutting of vegetatin/plants etc. as directed by theEngineer in charge. |
| 82 | Wiring for light point/ fanpoint/ exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulatedcopper conductor singlecore cable in PVC casingcaping with modularswitch modular platessuitable size modularsurface box of specifiedCategory and earthing thepoint with 1.5 sq.mm FRPVC insulated copperconductor single core cableetc. as required.;(b) GroupB -- with Cat B ModularAccessories |
| 83 | Wiring for circuit/ submainwiring alongwith earthwire with the followingsizes of FR PVC insulatedcopper conductor singlecore cable in theindependent PVC casingcapping of appropriate sizeas required.;(a) 2 x 1.5 sq.mm + 1x 1.5 sq.mmearthwire (20mm casing ) |
| 84 | Wiring for circui/ submain wiring alongwith carthwire with the followingsizes of FR PVC insulatedcopper conductor singlecore cable in theindependent PVC casingcapping of appropriate sizeas required. b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mmearthwire (20mm casing ) |
| 85 | Wiring for circui/ submain wiring alongwith carthwire with the followingsizes of FR PVC insulatedcopper conductor singlecore cable in theindependent PVC casingcapping of appropriate sizeas requirced.;(c) 2 x 4 sq.mm + 1 x4 sq.mmcarthwire (20mm casing ) |
| 86 | Supply, installation, testingand commissioning of 18/20 watt LED tubelightluminaire complete withall accessories ctc. asrequired of make PhilipsCat.No.BN170C LED20S6500 PSULI20/ Bajaj CatNo. BCLAB 20 LED P/Crompton Cat.No. CCs100-20-65-HL2-DP-NWH |
| 87 | Installationearthing testing andcommissioning of ceilingfan including wiring thedown rod of standardlength (upto 30 cm) with1.5 sq .mm FRFRLS PVCinsulated copper conductorsingle core cable etc. asrequired. |
| 88 | Supplying and fixing extradown rod of 20 cm lengthGl pipe 15 cm dia heavygauge including paintingetc as required |
| 89 | Supplying and fixing brassbatten/ angle holderincluding connections etcas required. |
| 90 | Supply of9 W, B22 cap,cool daylight(min 800LM)LED Lamp of make havellsBajaj/Philips/Anchor/Panasonic/Jaquar-spark HD orequivalent lamps withsimilar specifications incrompton / wipro |
| 91 | Supplying and fixingstepped type electronic fanregulator on the existingmodular plate switch boxincluding connections butexcluding modular plateetc. as required;(b) Cat B |
| 92 | Supply and erecting of 48inch (1200mm sweep)ceiling fan double ballbearing type complete withall accessories(b) Cat B |
| 93 | Supply and erecting of 9inch (225 mm sweep)exhaust fan with doubleball bearings 1400 rpmcomplete with allaccessories.(a) Cat A |
| 94 | Installation earthing testing and commissioning ofexhaust fan upto 450 mmsweep in the existingopening including makingthe hole to suit the size ofthe above fan making goodthe damage connectionstesting commissioning etcas required |
| 95 | Supplying and fixing 6 Ato 32 A C series MCBsuitable for lighting andother loads of followingpoles in the existing MCBDB complete withconnections testing andcommissioning etc asrequired.;() SP Cat B |
| 96 | Supplying and fixing 20 A240 V SPN industrial typesocket outlet with 2 poleand earth metal enclosedplug top alon with 20 A C series SP MCB in sheet steel enclosure in surfaceor in rccess with chainedmetal cover for the socketoutlet and complete withconnections testing andcommissioning ctc. asrcquircd\\":(b) Cat B\\" |
| 97 | Supplying and fixingsuitable size modular PVCbox with modular plate andcover in front on surface orin recess includingproviding and fixing I no 6pin 15/16 A modularsocket outlet and 1 nos 15/16 A modular switchconnection painting ctc. asrequired. ( For workstations);(b) Cat B |
| 98 | Supplying and fixingsuitable size modular PVCbox with modular plate andcover in front on surface orin recess includingproviding and fixing 3 pin 5/6 A modular socket outletand 5/6A modular switchconnection painting etc. asrequired.; (b) Cat B |
| 99 | Supplying and fixing 3 pin5/6 A modular socketoutlet and 5/ 6 A modularswitch on board themodular surfaceIrecessed PVC/GI modularbox by suitably increasingits modular capacitymodular plate and coverincluding connectionpainting etc. as required.;(b) Cat B |
| 100 | Supply and erecting meterbox suitable for threephase energy meter andincoming SP/DP MCBfabricated out of 16 SWGsheet steel powder coatedcomplete as required andconforming to therequirements of GoaElectricity Department. |
| 101 | Supply installation testingand commissioning of electronic type three phasecnergy cter (KWh) 4wire ISl marked inpolycarbonale or sghectsleel body ( base mountingtype) with counter display/LCD display with ELT inClass 1.0 50 Hz 240V. ACduly tested by MRT alongwith Test Certificatescomplete as required offollowing capacity of makeL& T only.;(c) 50 to 100 A |
| 102 | Earthing with GI carth pipe2 mts long 40 mm diamedium class with ISImark of approved brandsincluding accessories andproviding masonryenclosure with C/RCCcover having locking/Lifting arrangement andwatering pipe etc. (butwithout charcoal or cokeand salt) as required as perthe Earthing Drawingprovided by the EngineerIncharge.The scope of workincludes the following: a)Excavation of pit of sizenot less than 1.0xl.0x 2.0mtrs(min) and disposal ofexcavated soil. b) Class BGI pipe 40mm diameter asper specifications. c)Charcoal/salt as per specs (paid seperately). d)Refilling the pit of size notless than 1.0x1.0x 2.0 mtrs(min) with soft black soilof minimum resistivity ilctransportation. e)Masonarychamber with properfoundation cover plate andlocking arrangement. f)Testing of earth value withcarth megger andcertifications of its value.Aluminium tag withembossed earthing value tobe attached to the pipe. g)watering arrangement(plumbing will be paid seperately).() In soily strata |
| 103 | Extra for using salt andcharcoal or pipe earthelectrode as required( 65Kgs of Chareoal and 5 Kgsof Salt). |
| 104 | Providing and laying earthconnection from earthelectrode with4 mm diacopper wire in 15 mm diaGI pipe from earthclectrode as required |
| 105 | Providing and fixing 4 mmdia copper wire on surfaceor in recess for loopearthing. as required |
| 106 | Supplying and fixingfollowing way TPN sheetsteel double doorHorizontal type MCBdistribution board 41 S Von surfacc/ recesscomplete with tinnedcopper busbar neutralbusbar earth bar dinnbardetachable gland plate interconnectionsphosphotized and powderpainted including carthingetc. as required ( butwithout MCBRCCB/Isolator) (i) 8 way (8+24) doubledoor Horizontal type Cat B |
| 107 | Supplying and fixingfollowing rating four pole415 V isolator in theexisting MCB DBcomplete with connectionstesting and commissioningetc as required:(b) 63 ACat A |
| 108 | Dismantling, removal &stacking of old wiringincluding removal of wires, cable ,DB's, down rods,Switch Boards fittings/fixures etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender