Tender For Running Maintenance Of Public Health Services In Various Govt. Schools In Sector-45, U.T, Chandigarh.(Ch. To: 2215 Non Plan ).
Tender Value
6.20 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
12450
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running Maintenance Of Public Health Services In Various Govt. Schools In Sector-45, U.T, Chandigarh.(Ch. To: 2215 Non Plan ).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | All kinds of soil |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 13 | 100x75x4 mm |
| 14 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 15 | 250x16 mm |
| 16 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 17 | 150x10 mm |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 19 | 125 mm |
| 20 | 12 mm cement plaster of mix : |
| 21 | 1:4 (1 cement: 4 fine sand) |
| 22 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 23 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 24 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 26 | W.C. pan with ISI marked white solid plastic seat and lid |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 28 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 29 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 30 | Orissa pattern W.C. pan of size 580x440 mm |
| 31 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 32 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 33 | 10 litre (full flush) capacity-white |
| 34 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 35 | White solid plastic seat with lid |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 37 | Flexible pipe |
| 38 | 32 mm dia |
| 39 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 40 | 100 mm inlet and 75 mm outlet |
| 41 | Sand cast iron S&S as per IS - 3989 |
| 42 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms. |
| 43 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 44 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms |
| 45 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 46 | Internal work - Exposed on wall |
| 47 | 15 mm dia nominal bore |
| 48 | 20 mm dia nominal bore |
| 49 | 25 mm dia nominal bore |
| 50 | 32 mm dia nominal bore |
| 51 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 52 | 25 mm nominal bore |
| 53 | 20 mm nominal bore |
| 54 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 55 | 30 cm length |
| 56 | 15 mm nominal bore |
| 57 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 58 | 15 mm nominal bore |
| 59 | 20 mm nominal bore |
| 60 | 25 mm nominal bore |
| 61 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 62 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 63 | 15 mm nominal bore |
| 64 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 65 | 15 mm nominal bore |
| 66 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 67 | 15mm nominal bore |
| 68 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 69 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 70 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 71 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 72 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 73 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 74 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 75 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 76 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 77 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 78 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 79 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 80 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 81 | 100x100 mm size P type |
| 82 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 83 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 84 | M D - 10 |
| 85 | Square shape 450 mm internal dimension |
| 86 | H D - 20 |
| 87 | Circular shape 560 mm internal diameter |
| 88 | Providing and Fixing of white vitreous chinaware Urinal Partitions of size 90x320x720 mm complete in all respect. |
| 89 | Providing and Fixing of C.P. Waste 32mm complete in all respect. |
| 90 | Providing and fixing of 600x450 or 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Based on DSR Item No.17.31) |
| 91 | Providing and fixing gun metal peet valve, ISI marked for pressure not less than 3kg/cm2 complete in all respects. (As desired by EIC) |
| 92 | 15 mm nominal bore |
| 93 | Providing and fixing of C.P. Long Bend for OWC of size 32mm dia Complete in all respect. |
| 94 | Providing and Fixing PVC Tank Cover for water storage tanks of different sizes complete in all respect. |
| 95 | 500 to 1000 Ltr Capacity |
| 96 | Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. |
| 97 | Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete in all respect at site. |
| 98 | Providing and Fixing of PVC Handle for low level cistern complete in all respect. |
| 99 | Providing and Fixing of SFRC G.T. Cover and Frame size 375x375x25 mm thick complete in all respect. (Payment of concrete will be made extra) |
| 100 | Providing and Fixing of SFRC I.C. Cover & Frame 600x600x35mm thick complete in all respect. (Payment of concrete will be made extra) |
| 101 | Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required: |
| 102 | Providing and fixing of C.P.steel grating hole /without hole heavy duty 100mm dia complete in all respect. (As desired by EIC) |
| 103 | Providing and Fixing of standard cistern fittings of super nova complete in all respect. |
| 104 | Providing and Fixing of C.P. Brass Spindle (Heavy Duty) for bib taps and pillar taps weight approx. 110 grm complete in all respect. |
| 105 | Providing and Fixing of G.I. Elbow complete in all respect. Make: SVW, AVR, NVR |
| 106 | 15 mm dia |
| 107 | 20 mm dia |
| 108 | 25 mm dia |
| 109 | Providing and Fixing of G.I. Tee complete in all respect. Make: SVW, AVR, NVR |
| 110 | 15 mm dia |
| 111 | 20 mm dia |
| 112 | 25 mm dia |
| 113 | Providing and Fixing of G.I. Nipple of various sizes in place of existing rusted nipples complete in all respect. |
| 114 | 1/2\\" x 1\\" to 4\\" |
| 115 | 1/2\\" x 6\\" to 9\\" |
| 116 | 3/4\\" x 1\\" to 4\\" |
| 117 | 3/4\\" x 6\\" to 9\\" |
| 118 | 1\\" x 1\\" to 4\\" |
| 119 | 1\\" x 1\\" to 9\\" |
| 120 | Providing and Fixing of Grab Rail of 32 mm dia grade 304 stainless steel 600 mm long for handicape to toilet including stainless steel clamp and cost of cutting building and grouting in C.C. 1:2:4 complete in all respect. |
| 121 | Providing and fixing of PVC Pipe line 6kg/cm2 pressure of approved make including cost of coupler, cement solvent complete except excavation. |
| 122 | 110 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender