Tender For Renovation Of Male Surgical Ward, 1St Floor Of Multistorey Block (Old) At Govt. Multi Speciality Hospital, Sector-16, U.T., Chandigarh.
Tender Value
32.24 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
64500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Male Surgical Ward, 1St Floor Of Multistorey Block (Old) At Govt. Multi Speciality Hospital, Sector-16, U.T., Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | CARRIAGE OF MATERIALS |
| 2 | By Mechanical Transport including loading, unloading and stacking |
| 3 | Earth (Carriage of excavated good earth above 5 KM Lead from Sector-16 site to nearest dumping ground) |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 5 | All kinds of soil. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 11 | Suspended floors, roofs, landings, balconies and access platform |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 13 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 15 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 17 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 19 | Granite stone slab colour black, Cherry/Ruby red |
| 20 | Area of slab upto 0.50 sqm |
| 21 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 22 | Granite work |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm) |
| 24 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 26 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 27 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) |
| 28 | On one side only (2 x 31.43) |
| 29 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 30 | 250x16 mm |
| 31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 32 | 200x10 mm |
| 33 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 34 | Twin rubber stopper |
| 35 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 36 | Profile B |
| 37 | Fixing with adjustable lugs with split end tail to each jamb |
| 38 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 39 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 40 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 41 | 1:3 (1 cement: 3 fine sand) |
| 42 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 43 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour |
| 44 | Old work (one or more coats) |
| 45 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 46 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 47 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 48 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 49 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 50 | Of area 3 sq. metres and below |
| 51 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 52 | For thickness of tiles 10 mm to 25 mm |
| 53 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 54 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 56 | W.C. pan with ISI marked white solid plastic seat and lid |
| 57 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 58 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 59 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 60 | Kitchen sink without drain board |
| 61 | 610x510 mm bowl depth 200 mm |
| 62 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 63 | Orissa pattern W.C. pan of size 580x440 mm |
| 64 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 65 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 66 | 10 litre (full flush) capacity-white |
| 67 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 68 | Semi rigid pipe |
| 69 | 32 mm dia |
| 70 | Providing and fixing soil, waste and vent pipes : |
| 71 | 100 mm dia |
| 72 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 73 | 75 mm diameter : |
| 74 | Centrifugally cast (spun) iron socketed pipe as per IS: 3989 |
| 75 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 76 | 100 mm dia |
| 77 | Sand cast iron S&S as per IS - 3989 |
| 78 | 75 mm dia |
| 79 | Sand cast iron S&S as per IS- 3989 |
| 80 | Providing and fixing plain bend of required degree. |
| 81 | 100 mm dia |
| 82 | Sand cast iron S&S as per IS : 3989 |
| 83 | 75 mm dia |
| 84 | Sand cast iron S&S as per IS : 3989 |
| 85 | Providing and fixing heel rest sanitary bend |
| 86 | 100 mm dia |
| 87 | Sand cast iron S&S as per IS - 3989 |
| 88 | 75 mm dia |
| 89 | Sand cast iron S&S as per IS : 3989 |
| 90 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 91 | 100x100x100 mm |
| 92 | Sand cast iron S&S as per IS - 3989 |
| 93 | 75x75x75 mm |
| 94 | Sand cast iron S&S as per IS - 3989 |
| 95 | Providing and fixing single equal plain junction of required degree : |
| 96 | 100x100x100 mm |
| 97 | Sand cast iron S&S as per IS - 3989 |
| 98 | 75x75x75 mm |
| 99 | Sand cast iron S&S as per IS - 3989 |
| 100 | Providing and fixing collar: |
| 101 | 100 mm |
| 102 | Sand cast iron S&S as per IS - 3989 |
| 103 | 75 mm |
| 104 | Sand cast iron S&S as per IS - 3989 |
| 105 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 106 | 100 mm |
| 107 | 75 mm |
| 108 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 109 | 100 mm inlet and 75 mm outlet |
| 110 | Sand cast iron S&S as per IS - 3989 |
| 111 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 112 | 15 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms |
| 113 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 114 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
| 115 | Internal work - Exposed on wall |
| 116 | 32 mm dia nominal bore |
| 117 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 118 | 15 mm dia nominal bore |
| 119 | 20 mm dia nominal bore |
| 120 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 121 | 20 mm nominal bore |
| 122 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 123 | 15 mm nominal bore |
| 124 | 20 mm nominal bore |
| 125 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 126 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 127 | 15 mm nominal bore |
| 128 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 129 | 15 mm nominal bore |
| 130 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 131 | 15 mm nominal bore |
| 132 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 133 | 15mm nominal bore |
| 134 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 135 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 136 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 137 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 138 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms |
| 139 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 140 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 141 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 142 | With common burnt clay F.P.S. (non modular) bricks |
| 143 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality |
| 144 | H D - 20 |
| 145 | Circular shape 560 mm internal diameter |
| 146 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : |
| 147 | First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. |
| 148 | Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours |
| 149 | The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 150 | Providing and Fixing of Chinaware Oval shape counter wash basin with C.I. brackets without pillar taps, 32mm CP brass waste of standard pattren, including painting of fittings and brackets cutting and making good the walls whereever require make as approved by EIC. |
| 151 | Dismantling of Ceramic tiles or Vitrified and Plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of EIC. |
| 152 | Providing and fixing of C.P. Brass Soap dish of approved make complete in all respects. (As desired by EIC) |
| 153 | Providing and fixing of C.P. Brass Toilet Paper Holder of approved make complete in all respect. (As decided by the EIC) |
| 154 | Providing and Fixing of C.P. Brass Towel Rail 600mm long of approved make complete in all respect at site. (As decided by the EIC) |
| 155 | Providing and Fixing of white vitreous chinaware Urinal Partitions of size 90x320x720 mm of approved make complete in all respect. (As decided by the EIC) |
| 156 | Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required: (As decided by the EIC) |
| 157 | Providing and Fixing of 25 Ltr Capacity Hot Water Geyser including fixing at site of approved make complete in all respect. (As decided by the EIC) |
| 158 | Providing and fixing of C.P. brass Pillar Cock with autoclosing system of approved make complete in all respect at site. (As decided by the EIC) |
| 159 | Providing and fixing of C.P. Brass Over Head Shower round shape 100 mm dia of approved make Round Shape SINGLE FLOW (ABS Body Chrome plated with Gray Face Plate)with RCS or equivalent complete in all respects. (As decided by the EIC) |
| 160 | Providing and fixing of C.P. Brass Shower Arm casted 190 mm long of approved make round/square Shape for wall mounted showers with Wall Flange complete in all respects. (As decided by the EIC) |
| 161 | Providing and Fixing Single Lever Surgical Purpose Elbow Action Sink Mixer (Wall Mounted) of approved make with extended operating lever, connecting legs & wall flanges complete in all respect. (As decided by the EIC) |
| 162 | Providing and Fixing of HCI 'P' trap 4\\" dia for OWC complete in all respect. |
| 163 | Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC) |
| 164 | Construction of curb consisting of cement concrete 1:2:4 with PVC Pipe 4\\"6 Kg pressure per cm2 upto average length of 1' including cost of CP hinged grating and cost of sand, bajri etc. complete in al respect. |
| 165 | Removal of cinder from depressed portion including stacking outside and refilling after drying complete as per site. |
| 166 | Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC. |
| 167 | Providing and fixing of C.P. Long Bend for OWC of size 32mm dia Complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender