Tender For Repair And Maintenance Of Fire Fighting At Various Nrbs Under Juridition Of S.D.E. W/S Sub Division No.3, Chandigarh.(Ch. To: 2215 Non Plan Mtc.)
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
13600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Fire Fighting At Various Nrbs Under Juridition Of S.D.E. W/S Sub Division No.3, Chandigarh.(Ch. To: 2215 Non Plan Mtc.)
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 3 | Suspended floors, roofs, landings, balconies and access platform |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 5 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | 12 mm cement plaster of mix : |
| 9 | 1:4 (1 cement: 4 fine sand) |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. |
| 11 | Internal work - Exposed on wall |
| 12 | 25 mm dia nominal bore |
| 13 | 32 mm dia nominal bore |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 15 | 32 mm nominal bore |
| 16 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 17 | 25 mm nominal bore |
| 18 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 19 | 15 mm nominal bore |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 21 | DSR (E&M) 2025 Items |
| 22 | (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 23 | (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. |
| 24 | (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. |
| 25 | (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 26 | (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 27 | 450 lpm at 35 m Head |
| 28 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make: As per approved make list attached. |
| 29 | 25mm dia |
| 30 | 50 mm dia |
| 31 | 80mm dia. |
| 32 | 100mm dia. |
| 33 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required. Make: As per approved make list attached. |
| 34 | Single headed Gunmetal |
| 35 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : Make: As per approved make list attached. |
| 36 | 50 mm dia |
| 37 | 80 mm dia |
| 38 | 100 mm dia |
| 39 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : Make: As per approved make list attached. |
| 40 | 100mm dia |
| 41 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. Make: As per approved make list attached. |
| 42 | (a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 43 | (b) 20 mm nominal internal dia gun metal globe valve & nozzle. |
| 44 | (c) Drum and brackets for fixing the equipmets on wall. |
| 45 | (d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 46 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: Make: As per approved make list attached. |
| 47 | 2 way-100 mm dia M.S. Pipe |
| 48 | Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required. Make: As per approved make list attached. |
| 49 | HOSE CABINET FOR 15 MTR. LONG HOSE REEL PIPE & BRANCH PIPE ETC. |
| 50 | Providing and fixing of HOSE CABINET of Size: (600mm x 600mm x 450mm) made of 16 gauge MS sheet with 4mmthick glazed glass door i/c necessary locking arrangement suitable to accommodate 15 mtr. long hose reel pipe & branch pipe mounted on wall or raised bric platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect as required. Make: As per approved make list attached. |
| 51 | Providing & fixing of ISI marked (IS:15638) portable fire extinguisher, ABC (Powder Type) type capacity 4kg with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required. Make: As per approved make list attached. |
| 52 | Providing & fixing of Fire Extinguisher 4.5 kg carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket. Make: As per approved make list attached. |
| 53 | Supplying, laying, testing and commissioning of MS made cubicle panel made out of 1.6mm CRCA sheet powder coated with siemens color. The panel is design for wall mounting type with cable incoming and out goings from bottom. All the switchgear are from L&T /Schneider/Eaton Make MCB TP 32A, Contractor MNX-12A., Over load relay 4.5-7 5A, ON/OOF indication, STOP/START Push Button, Auto/Manual Switch, Terminal STRIP, MBC 1 POLE 6 Amp, Aux. Cont., SDS Timer, SPPR, Enclosure & accessories fabrication in 1.6mm. CRCA Sheet powder coating in Siemens Gray Shede, 75X40MM. Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable Lock, Rubber Gasket, hardware etc. Wiring & Accessories Power & Control wiring will be (ISI 1100V) flamo smoke FRLS PVC Singte Core Copper Wire Copper Lugs, PVC Steeve, Ferruels Numbers, Hardware & Lbour etc. including Starter suitable for 7.5 Hp mortar. Make: As per approved make list attached. |
| 54 | Providing and Fixing of GI Tank Nipple for fixing of tanks complete in all respects. |
| 55 | 50 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender