Tender For Repair/ Maintenance Of Day To Day Complaints Of Public Health Services (Sanitary Installation) And Other Allied Work At Civil Hospital, Sector-45, Chandigarh.(Ch. To: Annual Maintenance And Running Of Public Health Services (Sanitary Insta
Tender Value
5.32 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
5 days left
EMD
10700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Day To Day Complaints Of Public Health Services (Sanitary Installation) And Other Allied Work At Civil Hospital, Sector-45, Chandigarh.(Ch. To: Annual Maintenance And Running Of Public Health Services (Sanitary Installation) At 50 Bedded Hospital In Sector-45 (Burail), Chandigarh For The Period From 01.04.2026 To 31.03.2027.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 6 | 1:4 (1 cement: 4 fine sand) |
| 7 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 8 | Kitchen sink without drain board |
| 9 | 610x510 mm bowl depth 200 mm |
| 10 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 11 | Orissa pattern W.C. pan of size 580x440 mm |
| 12 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 13 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 14 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 15 | 10 litre (full flush) capacity-white |
| 16 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 17 | White solid plastic seat with lid |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 19 | Flexible pipe |
| 20 | 32 mm dia |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 22 | Internal work - Exposed on wall |
| 23 | 15 mm dia nominal bore |
| 24 | 20 mm dia nominal bore |
| 25 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 26 | 15 mm nominal bore |
| 27 | 20 mm nominal bore |
| 28 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 29 | 45 cm length |
| 30 | 15 mm nominal bore |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 32 | 15 mm nominal bore |
| 33 | 20 mm nominal bore |
| 34 | 25 mm nominal bore |
| 35 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 36 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 37 | 15 mm nominal bore |
| 38 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 39 | 15 mm nominal bore |
| 40 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 41 | 15mm nominal bore |
| 42 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 43 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 44 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 45 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 46 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 47 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighingnot less than 85 gms |
| 48 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2” BSP thread and shapes, weighing not less than 60 gms. |
| 49 | Providing and fixing of C.P.steel grating hole /without hole heavy duty 100mm dia complete in all respect. (As desired by EIC) |
| 50 | Providing and fixing of 600x450 or 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Based on DSR Item No.17.31) |
| 51 | Providing and fixing of C.P. Long Bend (1'-4\\" long) for OWC of size 32mm dia Complete in all respect. |
| 52 | Providing and Fixing of Tank Cover made out of 2mm M.S. Sheet and M.S. Flat completing including painting and locking arrangement complete in all respect. |
| 53 | 300/ 500 /1000 Ltr |
| 54 | Providing and fixing of PVC Pipe line 6kg/cm2 pressure of approved make including cost of coupler, cement solvent complete except excavation. |
| 55 | 110 mm |
| 56 | 75 mm |
| 57 | Providing and fixing of PVC Handle for low level cistern complete in all respect. |
| 58 | Providing and fixing of C.P. Waste 32 mm complete in all respect. |
| 59 | Providing and fixing of PVC fitting for low level cistern complete in all respect. |
| 60 | Providing and Fixing of SFRC G.T. Cover and Frame size 375x375x25 mm thick complete in all respect. (Payment of concrete will be made extra) |
| 61 | Providing and Fixing of SFRC I.C. Cover & Frame 600x600x35mm thick complete in all respect. (Payment of concrete will be made extra) |
| 62 | Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. |
| 63 | Providing and fixing of C.P. brass Autocloset pressmatic urinal cock of approved make complete in all respect. (As decided by the EIC) |
| 64 | Providing and fixing of C.P. brass Pillar Cock with autoclosing system of approved make complete in all respect at site. (As decided by the EIC) |
| 65 | Providing and Fixing of C.P. Waste 1 1/2 x 3\\"x4\\" long for stainless steel sink complete in all respect. |
| 66 | Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC) |
| 67 | Providing and Fixing Single Lever Surgical Purpose Elbow Action Sink Mixer (Wall Mounted) of approved make with extended operating lever, connecting legs & wall flanges complete in all respect. (As decided by the EIC) |
| 68 | Providing and fixing wash basin with C.I. brackets, without C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 69 | White Vitreous China Flat back wash basin size 550x 400 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender