Tender For Repairing Of Bituminous Road From Head Of Bipul Bala To Dipak Tea Shop At Magurkhali Road & Health Centre More To Pradip Tea Shop Via Head Of Badal Sarkar To Head Of Vola Paul At Gopalnagar Road Bye Lane & Head Of Bapi Acherjee To Head Of
Tender Overview
Project Description
Tender for Repairing Of Bituminous Road From Head Of Bipul Bala To Dipak Tea Shop At Magurkhali Road & Health Centre More To Pradip Tea Shop Via Head Of Badal Sarkar To Head Of Vola Paul At Gopalnagar Road Bye Lane & Head Of Bapi Acherjee To Head Of Rita Paul & Near Amtola More & From Head Of Kamal Dutta To Head Of Shanti Mali At Nasra(S) Lane In Ward No- 18 Under Ranaghat Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i)On bituminous surface @ 0.20kg- 0.3kg /sqm. |
| 2 | Bituminous MacadamProviding and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix, transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction(Reference to MORT&H's specification clause 504). for Grading II (19 mm nominal maximum aggregate size) Layer Thickness 50-75mm |
| 3 | Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously preparedbase, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required leveland grades (Reference to MORT&H's specification clause 510).Case - I: Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour . |
| 4 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference toMORT&H's specification clause 511).12(i) Case - I : Type A (Stone chips 6.7mm size) Providing and laying of liquid seal coat with HMP usingapproved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 5 | Sub Total |
| 6 | GST 18% |
| 7 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender